Easy LightBurn Camera Setup / Calibration! How to add a Camera to any Laser
Вставка
- Опубліковано 24 вер 2024
- LightBurn Galvo Camera Installation and Instructions. Add a camera to your fiber diet! Click on Show More for Video links!
Today I walk you through the complete setup of a non-LightBurn Branded USB Camera with my fiber galvo non-mopa raycus 50w laser , the NouaLaser Smart 2, which is available in various configurations. Please keep scrolling for more info.
Jason from LIghtBurn has a video with a more in-depth look at camera calibration if you get stuck and need an immediate knowledge dump: • LightBurn Camera Lens ...
Powertec Mini Gulp: amzn.to/3HDrkQz
Powertec 4in flexible duct: amzn.to/3JslQK5
Generic magic erasers: amzn.to/409JL6L
Center Measuring tool: amzn.to/3XL4jAV
x/y table: amzn.to/407MOfE
Starrett Level: amzn.to/3XFo3G6
Rode Go Wireless II: amzn.to/3RaLbdg
My Amazon Store: www.amazon.com...
******************************
EXCLUSIVE Access!
If you're looking for a Co2 or a Fiber laser, use my exclusive contact with NOUA Laser!
sales@noualaser.com and tell them I sent you!
******************************
Schedule Personalized Training:
calendar.app.g...
=======================================
My Online Store: www.lightsource.pro
Support the effort with a one-time donation!
PayPal link: paypal.me/322c...
=======================================
Follow me on Instagram and TikTok for behind the scenes pics and videos!
/ lsengraving
/ lsengraving
=======================================
Become a Patreon Supporter for insider benefits and downloads!
/ lightsourceengraving
=======================================
Facebook: / lsengraving
LightBurn Galvo Support Group {unofficial} / lbgalvo
Maker’s Unite Facebook Group: / makersuniteme
Discord: makersunite.me
Need to message me? Send a message to LSEngraving on Facebook
=======================================
Need to mail me something?
LIght Source Engraving
2397 Stevens Run Rd
Mt. Clare, WV 26408
=======================================
Lightburn Software - Try Before You Buy!
lightburnsoftw...
Lightburn Documentation:
docs.lightburn...
=======================================
Some of these links are affiliate links but will NOT cost you a penny more!
These are links for things I use to create projects, or things I use in my videos.
=======================================
The Laser I use most frequently, the NOUA Laser Smart 2
Amazon - amzn.to/3pCL7WB
The CO2 Laser I want next, the NOUA Laser Smart Gantry: amzn.to/3PM0jv8
Wireless Mic is the Rode GO Wireless II amzn.to/3T9m6jr
10ft USB Cable, works with fiber lasers and LightBurn Cameras:
amzn.to/3PJNEZP
Air Assist Quiet Compressor
amzn.to/3PEFHF7
USB/Wireless Microscope
amzn.to/3ABrkw3
X-Tools D1 20W:
shrsl.com/3o3v0
Ortur Aufero Portable Laser Engraver:
amzn.to/3PGKqq0
Ortur YRR Roller Accessory:
amzn.to/3QL6m4D
NEJE 3 Max
shrsl.com/3o3v3
Ortur 400x400 Honeycomb Bed:
amzn.to/3AIahtr
Ortur LM2 Pro, S2, Laser Head Focusing Controller:
amzn.to/3CpNtzH
=======================================
Laser Supplies
Make Your Own Stamps with a CO2:
amzn.to/3PI264r
THICK Metal Business cards:
amzn.to/3QMq7sz
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3AfcBqm
Ortur - 5 Colors, Transfer Paper for etching ceramic & glass:
amzn.to/3cbQAk3
The CORRECT glasses for a diode laser!
amzn.to/3KhzTAj
CHEAP and effective transfer/mask tape
amzn.to/3AFtVWV
Spikes for honeycomb stand offs:
amzn.to/3pFZEkt
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3cfsaX4
Pre-cut Acrylic for LED light bases
amzn.to/3AFXK9K
60 Pack of wood rounds for coasters
amzn.to/3wnhxrZ
Slate coasters with a stand
amzn.to/3wqhpbb
#laserengraving #fiberlaser #lightburn #engraving
*Be sure to check out the LIghtBurn Channel and documentation* In-depth lens calibration: ua-cam.com/video/A1ctQdbyn7A/v-deo.html Documentation: docs.lightburnsoftware.com/UsingACamera.html _Please Leave a Comment if you watched the video!_ *Check out the Unofficial LB Galvo support group: **facebook.com/groups/lbgalvo*
Great video and very thorough explanation. Thank you!!
Very welcome!
very thorough, I'll be sure to use this soon! Thanks Patrick!
thank you so much ive been trying to figure out how to adjust alignment with no luck what so ever didnt realizs you could adjust the X,Y and save setting to align
Hi, thanks for this video, very good. So each time you change out your lens if you want to use the camera, you have to calibrate it again each time? I was hoping it would save a settings setup or something for each "Laser" listed. I have a laser profile for each of my lenses. I don't see a way to save them individually if you want to use the same camera for all...
you can save the settings and it will stick with the device, and each different lens is a new device, LightBurn will automatically switch settings. I always verify before relying on the camera just in case.
Great video! Im about to get a sculpfun laser with a 935mm x 905mm expanded area. Can I also set up a camera for this area?
absolutely. use a wide angle fisheye lens equipped camera
This is a great how-to! Subscribing! Nice T-shirt btw!
Thanks for the sub!!!!!!!!!!!!!
Great step by step
Good video, but I find a white background works better for the dot pattern.
i can't argue, i haven't used white. :) i haven't had issues with black, yet. one thing for sure, either one are better than the honeycomb! haha!
I thought the camera for lightburn had to be in a stationary position otherwise if you mount to the galvo head and make height adjustments , wouldn't that throw off all of your calibrations?
you calibrate it to the focal length of the lens, so you end up with a different alignment for each lens you use. if using the same lens, it would always be at the same height from the workpiece.
Thanks for the help very informative
welcome!
Thank you for the video. I have two questions. The resolution is not the most optimal for work - is it 4K? and what camera degree is preferable I see from the seller 66, 76, 120 and 125 degrees
Lightburn has a built in camera selector that will help you figure out the optimal field of view. i like the 8mp lightburn branded cameras. docs.lightburnsoftware.com/Camera/Selection.html
@@LSEngraving Thanks
Raising and lowering it doesn’t throw things out of scale?
no, as it is calibrated to a set distance from the lens
How are you getting the tone with your lightburn when the cut is finished?
Device settings, enable sound when finished. Galvos only
What’s the camera do for it? Just to preview while you burn?
Lining up items, tracing items.
Can you save the settings for each lens and retain that accuracy? Example-If I did that for my 110 and swapped to another lens, and then swapped back to the 110 would I need to recalibrate?
you would not as long as the camera stays in the same position, which it should with only a lens swap
@@LSEngraving ty
What happens when you go from a 110 to a 300mm lense? Do you have to recalibrate it?
yes, need a calibration for each lens
All your "friends " got covered up by UA-cam and the watch next videos!😂
I'm definitely going to be watching that a few times when I get my camera going
ill fix that
how do we buy from GEO
MakrTheory@gmail.com