Hey, what to say awesome video thank you. Me and the wife just got our Falcon 2 (its the wifes) for setup she has been experiencing some error 9 and GRBL errors. I am hoping after coping your setting in lightburn as well as using the step tool we "should" be able to dial in the issues. Thank you again for your information. Will update in the comments later.
Really nice video demonstrating the possibilities with the laser engraver. I saw in a previous video (could also be more recent from your standpoint) that you had an xtool 10W (?) laser cutter. Did you swap out the xtool for the creality or vice versa? Why?
Complete Noob here. Do you have a video on how to center your laser on your object? I've seen a coup-le other videos but it wasnt for the Falcon2. I have the 40 watt.
For the second tumbler, did you turn the graphics in Lightburn to have the text horizontal when the tumbler is upright? I just did my first one with a cheap tumbler I got at Walmart and the text was vertical even though in Lightburn it was horizontal. Just wondering if you discovered that after your first one?
This video caused me problems. Also the output needs to be mirrored in the rotary setup in order for the letters to come out correctly. Also for the Creality Rotary you need the roller diameter to be 17mm and the mm per rotation to be 53mm. Please update this video. Thankfully I did my learning on an old tumbler that I didn't really care about.
Thank you for watching! It's strange that you had problems. I've never performed the rotary setup in LightBurn or made any changes. I've engraved a lot of tumblers and glassware without any issue. I'm not sure what might be different between our setups. - Ed
Hey, what to say awesome video thank you. Me and the wife just got our Falcon 2 (its the wifes) for setup she has been experiencing some error 9 and GRBL errors. I am hoping after coping your setting in lightburn as well as using the step tool we "should" be able to dial in the issues. Thank you again for your information. Will update in the comments later.
Good video. To the point and in focus. Not like some.
Yahoo, an informative video that is to the point and not made up crap.
Super informative thank you!
I just got this laser in my workshop and am browsing other videos on it. Your video is great! It's clear, concise, and very helpful!
Really nice video demonstrating the possibilities with the laser engraver. I saw in a previous video (could also be more recent from your standpoint) that you had an xtool 10W (?) laser cutter. Did you swap out the xtool for the creality or vice versa? Why?
Complete Noob here. Do you have a video on how to center your laser on your object? I've seen a coup-le other videos but it wasnt for the Falcon2. I have the 40 watt.
Did you get a reply on this? I am also a newbie and have the 22w
This was helpful! Couldnt find anyone else with the settings for the 22w to base my test range around ❤
Were you using the 22W or 40W setting in this video?
22w
Hello, your video it’s very helpful.!! But I have a question.! Can you engrave with color on the glass?
We’re did you get the extra legs? Mine only came with 2 sets.
hello I like your video my question is how can you put the design on lightburn to engrave the tumblers I am new at this .
Interesting. I have the same rotary and the falcon 10w and it says change your settings..
good job mate. did you use the air on or off when doing those tumblers and glass? cheers
Nice review, Ed!
Thank you sir! - Ed
My images were all stretched and I don’t know why, any suggestions?
Great video. Is this the 22 or 40w?
Nice work. The discount links do not work. Have they expired?
I just purchased mine and I will appreciate if u help me with some tips on how to engraved better
For the second tumbler, did you turn the graphics in Lightburn to have the text horizontal when the tumbler is upright? I just did my first one with a cheap tumbler I got at Walmart and the text was vertical even though in Lightburn it was horizontal. Just wondering if you discovered that after your first one?
Hello, how are you, at minute 5.40 you started recording on a glass glass, so would it be possible to do it on a glass candle as well ?
Some videos report the rotary attachment loosing step. have yo had this issue ?
what are the the settings I have a falcon2 12W laser engraver i am ne at this can you help me on this matter GOD Bless
The rotary attachment out of another machine at 1:30......would you be able to share where to find that? Slipping with the Creality one is a problem.
Did you get a reply on this? I too would like to get this attachment if possible
I did not.
@@AmyWeller it's the rotary pro kit. it's sold by creality.
@@dancrawford5501 it's the rotary pro kit. it's sold by creality.
mass production to produce the machine?
Ahh I forgot I had already made a comment. Ah well I was obviously not bullshitting the first time.
Can I use these settings on a 40w ?
This video caused me problems. Also the output needs to be mirrored in the rotary setup in order for the letters to come out correctly. Also for the Creality Rotary you need the roller diameter to be 17mm and the mm per rotation to be 53mm. Please update this video. Thankfully I did my learning on an old tumbler that I didn't really care about.
Thank you for watching! It's strange that you had problems. I've never performed the rotary setup in LightBurn or made any changes. I've engraved a lot of tumblers and glassware without any issue. I'm not sure what might be different between our setups. - Ed
@@WolfRidgeWoodworkingfunny how people leave negative comments and then never reply again. 🤦♂️
0:06
doesnt engrave metal AT ALL word plastic sure metal LOL no
It does work pretty well on stainless steel for me