Це відео не доступне.
Перепрошуємо.
how to fix a FLOODING CARBURETOR that wont run DONT BUY A NEW ONE!!!!
Вставка
- Опубліковано 12 гру 2020
- carb was flooding and the truck would not start at all..
just an idea on how I got it running again
E10 ethanol gas problems video on my chevelle: • E10 ethanol gas carbur...
guys, i have worked with Carter, Edelbrock, and Holley on all my street cars and race cars for over 30 years. i am happy to watch your videos and possibly learn something new, because i know i don't know everything.
Glad to see someone knows and understands about phase separation and the cause. It's a good looking project that your making progress on
That's always been the problem with the forums especially, you're looking for some genuine help and then all the boomers/purists hop in and suggest you shit you dont want/need. They seem to think EVERYONE wants to build show cars and do a shitty job thoroughly explaining things and getting to the point. Great video.
Thanks the things you're talking about exactly where I'm at any body that knows anything wants money just to explain or give you ideas what to look for so thanks again appreciated
Just came across your channel. I will definately try this. My 1406 flooded after I rebuilt it. I used the needles and seats that came with the kit...but I dont think I set the floats right. Took it off..adjusted the floats and it stills floods. I will try cleaning the needles, seats and adjusting the floats right this time. Great video!
This is extremely helpful. All other videos weren't. Thank you sir
I was going to ask if Heet would do any good, but I watched the other video and got my answer. Good content Chris, I'm learning a lot from your channel.
I take it the answer is no?
If so, then use "Rec gas" (recreational fuel with no ethanol).
Or look up "VP fuels" on internet.
I just subscribed because you have the no bullshit attitude that I have and screw everyone that thinks they can talk me into something I know damn dummy I’m glad that you’re teaching us how to do our own stuff much respect
man you seam chill a.f. I enjoyed the videoing a lot
Thank fuck I found ya, couldn’t get the old girl going, cheers man best learning curve is fucking off the big mouths
Years ago I had a Datsun that would not start up in the morning due to moisture. Guys would laugh when I told them I covered the engine with a blanket, to prevent moisture build up in the carb. Doesn't take much moisture to create a problem
I have a 1979 Chevy c70 dumptruck with a 366 v8, has an Edelbrock 600 on it, won't idle smelling gas , have to idle up the rpms for it to idle, runs great on the road but won't idle, you think jet is clogged? I hate ethanol.
Do you use ethanol gas
that’s all we have in Texas 10%
Chris what’s it look like inside your portable gas tank?
Wasup chris working on a 1973 5.7 rocket motor and now carb is flooding
What carb do you recommend for a square body sbc?I just bought a reman AVS 2 n it's giving me flooding issues.
a carb needs low psi and high volume.. what is the engine and what carb (spec) did you buy?
Wow bro my son got a 61 caddy and it has a four barrel idelbrock and we haven’t been able to start it. We have crank and spark and the carb was shooting a must if gas out of it going to try this to see if it works. Thanks
Where you able to figure out the problem? My 84 c10 has the same issue and i cant get it to start
Thanks man was really helpful
Good to know. Thank you for this!
Chris, noticed my 350 is consuming a ton of fuel, to the point my oil is like water after only 15 minutes of running... I have a 1405 but was thinking could this issue be a bad fuel pump dumping fuel into the bottom of the motor? Thanks for all your videos!!!
I would change the mechanical fuel pump., something is seriously wrong... that usually happens on fuel injected vehicles when the pressure regulator fails and it wipes the rings out... engine will have 0 compression .. does it have electric fuel pump?
Great Video, Chris I have a Holley 1904 in my 54 Chevy. It started overflowing gasoline. I cleaned the needle and seat etc and still, nothing changed it stills overflows...any ideas or suggestions? or something I'm overlooking?
New needle and seat.. did it ever work before without flooding?
@@chriscraft77022 Chris it worked fine until I replaced the gasket that was leaking. I went cheap, I only clean it up. I ordered a kit for it. It is Schedule to arrive next week. hopefully, with the new needle, it should correct the problem...I'll keep you posted
I would replace it anyway.. the only other thing is a stuck float
I’ve literally had to vacuum out my spark plug chambers, then go in threw the intake side, it was flooded so bad!
😳
Sounds nice
Water in your gas tank. Nothing wrong with the carb.
i am using a red gas can as the tank, you can see it in the video next to the radiator.. its only 2 gallons... and i fill it about once a week with new gas.. phase separation occurs in the fuel bowls because they are vented to atmosphere.. houston has high humidity.. ill link my ethanol problems in the description
Some people have air filter on their carbs .
I’m gonna put it on I hope that fixes it..
I hate those carbs, I will never buy another one
Holley 3310-1
I’m gonna put the 3310-2 I built on one of my videos..
Rec gas (recreational gas)
I’m gonna look that up, thanks
Put air cleaner cover on it
good idea... i have the original one.. thanks for reminding me
@@chriscraft77022 You’re welcome that would be smart
It's not the carbs fault. Just use stabil or use fresh fuel. I love edelbrock carbs.
it is the carbs fault. the design.. people don’t like the truth
@@chriscraft77022 disagree. Crap gas these days.