@@frankynakamoto2308i dont know if this account is still alive or not ,but i want you the video at 3.20minutes ,then we can see the spark between coil wire and supply cable
Could you try putting that ring in a plastic shell and let it rotate while having an inside piece stay stationary? Like a space ship? Maybe this is all that’s required?
Implement coil magnets with the coil, all as individual components on a PID votage and amperage control system and then we can truly play... When I have the time, I'm going to build test some cone coil... Awesome work, keep moving forward, :)
Im just waiting for the day you build the first flying saucer on youtube, until then i will keep watching your vids and dropping likes. Great work keep it up.
If you take 4 square aluminium plates and cut them in half, then place two together then place the other two on top as second layer with the joint opposite to first layer you can achieve stable levitation without magnets.... So two layers with a cross joint pattern + magnets
well done - I've never even thought about the approaching the opposite side. This seems a bit dangerous though are there any safety percussion in attempting this other the just accidently burning down my tinker shed
That setup, maybe if the copper coil was more resistant to burn, and increasing the voltage in the line could be a way to levitate wat heavier loads, from the base itself. This could be the basic on how alien ships keep their ship floating, if the outer magnets weren't solid, if they were adjustable in power, that could be the way to fly on a specific direction.
Roobert33, I have this crazy idea of destroying energy. You put a peltier element in an aluminum block. Hot and cold would neutralize to some extent and there will be some destroyed energy. What do you think?!
If you create too large of a magnetic field in that copper coil you run the risk of demagnetising your permanent magnets, especially if you secure that coil directly over the magnet without allowing it to be pushed away
I guess the smell of that coil smoke was priceless ...
Isn't this the basics of what a speaker coil does?
Yes.
3:43 “I want flames” - Photonicinduction 2017
I popped it.....!
Play it repeatly
Your experiments speak for themselves. Thanks!
😅👍
Fake
@@frankynakamoto2308 no u
@@frankynakamoto2308i dont know if this account is still alive or not ,but i want you the video at 3.20minutes ,then we can see the spark between coil wire and supply cable
Spherical neodymium magnet in mercury, inside a copper ring made of thick walled tubing... What could you do with that? Curious
Could you try putting that ring in a plastic shell and let it rotate while having an inside piece stay stationary? Like a space ship? Maybe this is all that’s required?
Carbon fiber on the coil
@@nathanisaacs4086 what about graphene? Is it’s conductivity the right kind?
Bravo Robert 👍👍
Implement coil magnets with the coil, all as individual components on a PID votage and amperage control system and then we can truly play... When I have the time, I'm going to build test some cone coil...
Awesome work, keep moving forward, :)
Im just waiting for the day you build the first flying saucer on youtube, until then i will keep watching your vids and dropping likes. Great work keep it up.
If you take 4 square aluminium plates and cut them in
half, then place two together then place the other two on top
as second layer with the joint opposite to first layer you can achieve stable levitation without magnets.... So two layers with a cross joint pattern +
magnets
well done - I've never even thought about the approaching the opposite side. This seems a bit dangerous though are there any safety percussion in attempting this other the just accidently burning down my tinker shed
Good experiment........why it's burned? Voltage or amp?
Well, both of you..
I wonder if you could achieve full lift with direction control with a portable platform
Esta buena la idea....y si alimentas la bobina por inducción no ocuparlas los cables con un diodo y un capacitor
That setup, maybe if the copper coil was more resistant to burn, and increasing the voltage in the line could be a way to levitate wat heavier loads, from the base itself.
This could be the basic on how alien ships keep their ship floating, if the outer magnets weren't solid, if they were adjustable in power, that could be the way to fly on a specific direction.
By ‘weren’t solid’ are you perhaps thinking of a liquid? In that case, Mercury is the answer to your question ;)
3:19 at speed 0.25. It didn't even reach but jumped?
what do you mean ? :)
It is interesting but it is not realy levitating!!!!
Compliments Robert !!!
Ouchhhh!!!
Same principle as a loudspeaker.
Does coil produce heat? And how about the power supply ,can you explain about the power supply? Please sir🙏
Great work. What is the polarity on the magnets? (north vs south)
I didn't pay attention to this.
How a current in the coil?
Amazing!!!
Id like to see what would happen if the coil was wrapped in carbon fiber wich by the way is also conductive
Try putting some soundwaves down at low bass frequencies
Now we can understand how UFO flying ,,,,,,,
Lay your construction on a scale.. Will it be wight slower if it goes up?
Sir one dought it can attaract 🕯️🕯️🕯️ candles please reply sir
lets try 240vdc and watch her rock and roll!
With 240vdc it lasts a few seconds.
@@ElectricExperimentsRobert33 it will fly up to the ceiling like a ufo!
You should build the same thing in foam. and see if it lifts off the Table.
3:52 alfred hitchcock suspense...lol
neat-o
Genial un amortiguador megnetico
o que parece chama é frio? Por que a chama não queimou o fio e a placa?
Amazing!
Hello I am an prof lineman, maybe a have an cool video for you and you community please contact
❤️👍
can you show the power supply sir?
Very good 👍
Why did it caught fire 🔥🤔 WTF
New flying objects invention
Does the copper have a downward force, or if you had enough power/copper could it lift the entire contraption?
Looks more like a working summoning circle. Only thing here is you are summoning magnetic field
Hell nah!!! That was too cool. LOL!!!!
now do it with twinned ac current and fractal coils. I guarantee you'll get way more impressive results.
The weight is on the contact with earth.. relative levitation.. relative to magnet only ... no intrraction with the main issiue
Roobert33, I have this crazy idea of destroying energy. You put a peltier element in an aluminum block. Hot and cold would neutralize to some extent and there will be some destroyed energy. What do you think?!
I have not yet thought about this possibility.
Excelent experimental magnetic levitation
Awesome
How do u prevent the coil from burning??
Lowering the voltage.
How to measure accurately at what maximum voltage will the coil withstand without getting burst?? Thx
@@andrewkhchan 10-11 volts maximum, about 20 minutes..
Гравицапа)))
Can you put an magnet inside?
And connect the wires
👍🏿👍🏿👍🏿👍🏿👍🏿👍🏿👍🏿👍🏿
Do the same experiment with a drawn circuit with silver or carbon ink.
That's crazy
I likely. Very Food experiments.
It heats up.
This vídeo has not eny interesting isue that ever had seen in other videos ...
My electric videos are varied. I don't just make interesting arguments..
Prueba a poner algo ligero a modo de tapa tipo pvc y un condensador debajo en el centro
Nice. Try a jello mold filled with iron filings and salt water.
Charge it and watch the el cheapo. Super fluid spin and float
can you flip it upside down and make the whole thing levitate elelele nice vid
Ooo
Why you dont try with aluminium??
You call this levitation? Ha-ha.
Сколько напряжение и сила тока было,когда сгорела катушка? / how much you have did current & voltage when it flame?
About 26 volts.
Excelente!
Op
Why the flames?
Can i buy one off you? A mini model
and the V when it burn?
Is it possible make it with permanent magnets?
Yes, it is also possible, as long as they have a strong magnetic attraction.
Coil was paid actor
Old technology
Попробуйте сделать саб.
Repulsions
الجازبيه
磁場空間は不思議だ!
Cago fuego
Too smart bro
nnnnnnoooooooo ! (((
Que corriente usas? Alterna o continua?
12 and 24 continua
D+ vc talvez inventou uma coisa revolucionária parabéns
If you create too large of a magnetic field in that copper coil you run the risk of demagnetising your permanent magnets, especially if you secure that coil directly over the magnet without allowing it to be pushed away
Di Glocke!! Need mecury red 232
No fake
Ufo
Fake
03:19 а фуй так подымит?
это максимальный подъем