Does it matter how many winds the coil has? I want to make this project for a college course... How accurate do you have to be with the winding of the magnet wire?
The code is small in size and very fast, basically assemblerPID control would be the best way to go. What brand of microphone do you use to make your videos, the quality is very good.
I just have 7806 Voltage Regulator. Can i use 7806 instead of 7805 ? Thank you every much. Please help me. I stuck with this project like 3 weeks. I dont know, but it doesnot work.
Hi that's a great and interesting video, i just have a question if you can answer: My problem is the program, i don't have forth ... so how i can put it on arduino doing the sketch?Ther's possibility to have it writed in C ? ty for your answer.
@@akshatpande1649 Get the power supply out of an old computer (PC). You can use the 12 volt output. www.instructables.com/id/A-Makers-Guide-to-ATX-Power-Supplies/
0033mer if i replace both the capacitor with elctrolytic capcitor with 1 microF each of 6.5 volts rating would the circuit still hold?and also a 12v 2 ampere adapter should be enough to turn on the electromagnet right??
The magnetic field is never turned off fully. When the mosfet turns off, the free wheeling diode across the coil re- circulates the back emf energy into the coil keeping it on for a short period of time.
In the circuit diagram, did you use both 1N4007 and 1N 5818 or we can use either one since both are diodes? Can you kindly tell which order if both are used. Thanks :)
0033mer, Just revisited this video, such a cool project and very concise code to keep a magnet levitate. Just wondering, have you made a video about PID control ?
@0033mr Would you happen to know if I can purchase this design in a working kit? I have a situation that requires a zero friction pendulum (less than 1 pound). It is an improved experiment of Foucault pendulum inside a vacuum chamber. Never before performed in this configuration. Thank you, good day
Sir please tell me the program code you have shown in the video, is it only this much or it is longer. I am in final year of my engineering and want to make this project. If you could give me any link regarding the code, I would be very grateful to you. Thankyou😅
@@0033mer I have looked all over the site for the code and cannot find it. Where exactly is the source code contained and how do I transfer it to my Arduino?
Hi, my friend, congratulations on your work. I could arrange it in writing, as I have some difficulty in the details in the English language. Hugs from Brazil
They are also available online if you don't want to build one. www.banggood.com/DC-12V-88-LB-40kg-Electric-Lifting-Magnet-Electromagnet-Solenoid-Lift-Holding-Electromagnet-p-1066586.html?rmmds=search&cur_warehouse=CN
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I did this project twice, with hall sensor and IR LED, that's incredible !
hey i have some questions. can you help me?
@@PrinceSharma-jz5yq hey dude, for sure.
hey i am doing this project for my school can you answer some of
questions
Does it matter how many winds the coil has? I want to make this project for a college course... How accurate do you have to be with the winding of the magnet wire?
Forth on Arduino has got to be one of the coolest combos of oddball stuff ever; better than Cheetos and lime.
That works quite well for such a simple control scheme.
The code is small in size and very fast, basically assemblerPID control would be the best way to go.
What brand of microphone do you use to make your videos, the quality is very good.
how to find levitation point???
@0033mer can you please tell me how to identify the levitation point please
Does consume power
this guy sounds super excited each and every second
can you please tell me what the two things besides the regulator are (i am referring to the white and blue boxes)
Good work and thank you for teaching the human race!
good evening, what programming language did you use? If C++, can we see your code?
Please Reply........🙏
How many hours it can levitate?
Plz reply that which software you used to upload the code to arduino
what size of wire did you used? and how many turns? my problem is about coil....plz answer
I just have 7806 Voltage Regulator. Can i use 7806 instead of 7805 ? Thank you every much. Please help me. I stuck with this project like 3 weeks. I dont know, but it doesnot work.
Hi that's a great and interesting video, i just have a question if you can answer:
My problem is the program, i don't have forth ... so how i can put it on arduino doing the sketch?Ther's possibility to have it writed in C ? ty for your answer.
Arduino code plssssss, i cant see it in forth.
Super today only I will try
How we could make a electromagnet in home
Nice simple and detailed project... Thanks.
I subsrcibed a week ago and now: an awesome video about an awesome topic! this really is worth the sub!
Is the oh49e necessary ?? If we use some other hall effect sensor would the circuit be effected ??
Any type of linear hall effect sensor will work.
thanks for the reply ,i dont have a lab bench power supply how to i supply 10 v to it ??
should i use 9v batteries in series cause we already have a voltage regulator
@@akshatpande1649 Get the power supply out of an old computer (PC). You can use the 12 volt output.
www.instructables.com/id/A-Makers-Guide-to-ATX-Power-Supplies/
0033mer if i replace both the capacitor with elctrolytic capcitor with 1 microF each of 6.5 volts rating would the circuit still hold?and also a 12v 2 ampere adapter should be enough to turn on the electromagnet right??
Very cool, no hysterisis in the turning on and off of the electromagnet ?
The magnetic field is never turned off fully. When the mosfet turns off, the free wheeling diode across the coil re- circulates the back emf energy into the coil keeping it on for a short period of time.
In the circuit diagram, did you use both 1N4007 and 1N 5818 or we can use either one since both are diodes? Can you kindly tell which order if both are used. Thanks :)
Hard to read, first is 47mf cap, second?
Can you send the codes as written in aurdiuno
0033mer, Just revisited this video, such a cool project and very concise code to keep a magnet levitate. Just wondering, have you made a video about PID control ?
I have no PID control videos but I have used Fuzzy Logic which works similar to PID but operates more like how the human brain reasons.
@@0033mer thanks for the tío on fuzzy logic, I’ll look it up !
How to make the coil?????
Go to 00:53 in the video.
@0033mr Would you happen to know if I can purchase this design in a working kit? I have a situation that requires a zero friction pendulum (less than 1 pound). It is an improved experiment of Foucault pendulum inside a vacuum chamber. Never before performed in this configuration. Thank you, good day
If you search online there are kits available: www.arttec.net/Levitation/index.html
Sir please tell me the program code you have shown in the video, is it only this much or it is longer. I am in final year of my engineering and want to make this project. If you could give me any link regarding the code, I would be very grateful to you. Thankyou😅
That is all the code. It is written in FORTH.
www.forth.com/
@@0033mer I have looked all over the site for the code and cannot find it. Where exactly is the source code contained and how do I transfer it to my Arduino?
arduino code pls
Hi, my friend, congratulations on your work. I could arrange it in writing, as I have some difficulty in the details in the English language. Hugs from Brazil
Can you send me the coding please urgent
Cool !
It seems that making the electromagnet is the hardest part
They are also available online if you don't want to build one.
www.banggood.com/DC-12V-88-LB-40kg-Electric-Lifting-Magnet-Electromagnet-Solenoid-Lift-Holding-Electromagnet-p-1066586.html?rmmds=search&cur_warehouse=CN
thanks sir
Why all of you Dont build it Opsidown!#
Ich kenne was besseres
Make a video.
fake
Build one yourself before you criticize.
ua-cam.com/video/HYJWXKewE8s/v-deo.html
ua-cam.com/video/eOT_G-1ogn4/v-deo.html
man I hope this works this time finally somebody in English - round 2MMOHM FIGHT!!