⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html ⛐ Link to donate on GoFundMe: gf.me/u/y4u9cd
I have a 2012 kia optima hybrid with P0340 and P0365 codes. I replaced both camshaft sensors, and im still getting the camshaft sensor trouble code. The hybrid battery is charged, and the engine will turn over but will not start. I took off the valve cover and checked the timing chain, and it's tight. Why am I getting the camshaft sensor fault even after replacing them?
What about 2016 Kia optima? Is it in the same place? Another video from another guy had his video as 2016-2020 camshaft sensor b? So are there two then?
Please I need your help with P2088. Rpm is high above 1,200 and excessive fuel consumption. Vehicle is 2015 Hyundai Sonata 2.4 GDI with E-VVT. Initial code was P0010. Both cams was replaced including the A Camshaft Position Actuator Sensor, after replacement of these parts, P0010 cleared off but p2088 code became active. Kindly advice.
Anyone doing this afraid of losing the bolt I zip-tied the bolt with a skinny zip tie I have fat fingers , so I needed a way not to lose the nut , then when i screwed it back in slightly so it will be firm then I cut the zip tie off .. just a creative tip
Dude, you are very knowledgeable about cars but your accent kinda ruins it because we can't understand you. Please hire someone to help you with the accent. How can you make money off of this if we can't understand what you are saying?
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html
⛐ Link to donate on GoFundMe: gf.me/u/y4u9cd
This is a very useful video. Be carful if the cam sensor is older, plastic might break
Thank you , this was very helpful .
Are the intake and exhaust cam sensors the same part, or two different models?
I have a 2012 kia optima hybrid with P0340 and P0365 codes. I replaced both camshaft sensors, and im still getting the camshaft sensor trouble code. The hybrid battery is charged, and the engine will turn over but will not start. I took off the valve cover and checked the timing chain, and it's tight. Why am I getting the camshaft sensor fault even after replacing them?
What about 2016 Kia optima? Is it in the same place? Another video from another guy had his video as 2016-2020 camshaft sensor b?
So are there two then?
Please I need your help with P2088. Rpm is high above 1,200 and excessive fuel consumption. Vehicle is 2015 Hyundai Sonata 2.4 GDI with E-VVT. Initial code was P0010. Both cams was replaced including the A Camshaft Position Actuator Sensor, after replacement of these parts, P0010 cleared off but p2088 code became active. Kindly advice.
Hey I dropped the bolt and can't find it, can you tell me the exact size and thread of the bolt?
If you drop it, it disappears into a black hole. :(
Anyone doing this afraid of losing the bolt I zip-tied the bolt with a skinny zip tie I have fat fingers , so I needed a way not to lose the nut , then when i screwed it back in slightly so it will be firm then I cut the zip tie off .. just a creative tip
I lost the bolt, where can I buy a new one?!?!?!
Go to Lowe’s or some place, find a bolt that fits
Great. But you never show where it is located 🤦🏻
Only 1 sensor?
No I'm
Stop doing so much unnecessary talking
Dude, you are very knowledgeable about cars but your accent kinda ruins it because we can't understand you.
Please hire someone to help you with the accent. How can you make money off of this if we can't understand what you are saying?
Really bro? Are you that fuckin dense?