Yes, I did. I ended up getting a cheap $10 AM radio at Walmart and that actually worked better than the toner tool I had. Im happy to answer more specific questions if you have them.
@@marshallcmu6103 I have the 430X, which has the perimeter wire with 2 endpoints, but also 2 guide wires that intersect with the perimeter wire. How I trouble shoot this now is by playing with the connectors by moving the guide wire connectors to the perimeter terminal points on the base. That gives you an inner loop, so you can see if the break is in that area or in the outer loop. Let me know if that makes sense.
I just went through this. It is a pain you have to disconnect one side.
pretty sure you have to disconnect both sides. You are energizing both wires if they are not both unplugged. Only one wire should be connected.
Did you solved the problem mate? Mine does the same...strong signal all around and the mower gives me the No Loop Signal message.
Yes, I did. I ended up getting a cheap $10 AM radio at Walmart and that actually worked better than the toner tool I had. Im happy to answer more specific questions if you have them.
@@jeg3224 fixed mine today, apparently i had to in the menu and select "set up new loop signal" works now
@@TheLandCruiserChannel glad to hear you got it working! Enjoy *not* mowing this summer! 😎
@@jeg3224 how did you get yours to work? I can not figure mine out. Strong signal 🤷♂️
@@marshallcmu6103 I have the 430X, which has the perimeter wire with 2 endpoints, but also 2 guide wires that intersect with the perimeter wire. How I trouble shoot this now is by playing with the connectors by moving the guide wire connectors to the perimeter terminal points on the base. That gives you an inner loop, so you can see if the break is in that area or in the outer loop. Let me know if that makes sense.
En Français ce serait mieux