One of the best Mechanics on here. He always gives nice clear instructions and good quality video. It is a pity he did not do more videos. He would be well worth paying and he gives straight forward instructions and is very acceptable. Full Marks and well done for all that I have seen. Having been in the trade for 50 plus years it is a pleasure to see such a good man doing a good job.
One added tip. Wrap some cloth round the base of the master cylinder reservoir. When you push the brake cylinder pistons back in it may force some brake fluid out of the reservoir, and there's no better paint stripper than brake fluid. Don't get it on your bodywork, and if you do, wash it off immediately with soapy water.
Excellent video, and just what I was looking for. I am intending to replace the shoes on my Suzuki Wagon-R, which I think will be much the same. Particularly I was interested in the self adjusters and how to reset them. Only one thing, I think I will clean the crap out of the brakes before re-assembly with brake cleaner. I also did not know about the screw holes for extracting the drum, so that will save me a lot of head scratching.
Very good video. Learnt a lot. Thank you. Recently, when my mechanic opened the drum, we found that one pin that goes through the centre of the brakeshoe was missing. It comes at 3:02 in the above video. Was that dangerous? What could have happened? After placing a new pin and clip, the handbrake has become very efficient. It works within 3 clicks. Earlier, it used to take 5 clicks. Please let me have your views. Thank you.
Nice, clear video. Thanks. One question...when you loosen the handbrake cable, does the handbrake need to be off. Also do you have to do any resetting if the handbrake afterwards..
I have a suzuki swift 1.3ddis 2005 - are my rear brakes the same as these? Brilliant video by the way - I am not great at mechanics but I could follow your instructions easily. Thanks. Steve
how or what do i do if i got a little pin hole in the brake cylinder seal or cap whatever its called and can i replace it do i buy a new cylinder all together or can i buy just the little rubber seals and are they hard to replace
Hi, I did this job on my 2006 aerio (lania) but I forgot to remove the 10mm bolt for the hand brake cable, instead I detached the cable from the bracket it attaches to. I put it all back together properly, but now my hand brake is very loose. Is the best way to adjust it to go through the console near the brake lever inside the car like I have seen in other videos? Or is there a different way to do it. Thank you and great vid!
Unfortunately there's two variants of SX4 drum brake, first gen cars sold in the UK (made in Hungary I think) have a different adjuster mechanism which isn't as reliable as this and a bitch to set properly.
And use a completely different brake pad as I found out with my 2008 Grand Vitara... Oem part 53200 65J01 says its not for my car, even though it is literally whats installed
One of the best Mechanics on here. He always gives nice clear instructions and good quality video. It is a pity he did not do more videos. He would be well worth paying and he gives straight forward instructions and is very acceptable. Full Marks and well done for all that I have seen. Having been in the trade for 50 plus years it is a pleasure to see such a good man doing a good job.
One added tip. Wrap some cloth round the base of the master cylinder reservoir. When you push the brake cylinder pistons back in it may force some brake fluid out of the reservoir, and there's no better paint stripper than brake fluid. Don't get it on your bodywork, and if you do, wash it off immediately with soapy water.
Good video. Good camera work. Only problem is, I don't have three hands like you do. LOL
Hahaha, you are the perfect mechanic, I wish I had three hands like you... :) btw, thanks, excellent video.
Thanks this was helpful, helped me with a 2004 Suzuki Aerio
Excellent video, and just what I was looking for. I am intending to replace the shoes on my Suzuki Wagon-R, which I think will be much the same. Particularly I was interested in the self adjusters and how to reset them. Only one thing, I think I will clean the crap out of the brakes before re-assembly with brake cleaner. I also did not know about the screw holes for extracting the drum, so that will save me a lot of head scratching.
Why do you have to make the Emergency brake cable lose
The video says "bolt type in description", but it's not there. Is it M8 or something?
M8 yes
What is the size for 2 bolts you use to take off the cover
Very good video. Learnt a lot. Thank you.
Recently, when my mechanic opened the drum, we found that one pin that goes through the centre of the brakeshoe was missing.
It comes at 3:02 in the above video.
Was that dangerous? What could have happened?
After placing a new pin and clip, the handbrake has become very efficient. It works within 3 clicks. Earlier, it used to take 5 clicks. Please let me have your views. Thank you.
Подскажите какие два болта которые используются для снятия барабана?
you want to lube the backing plate where the shoes rub
Why didn’t you adjust the spring loaded adjuster so the clearance between the drum face and the shoe is the right distance
it will be self adjusted after first pedal press
bolt size not in description
This will help me on my 2006 Grand Vitara.
I have the same car and my ESP light will not turn off. Any help?
Why do you remove the not on the back side ? Please explain the purpose.
Going to do my Suzuki swift tomorrow .. Thanks .Great video
I need further description on the bolt size. There's tons of different M8 bolts that are different mm sizes
M8x1,25
Nice, clear video. Thanks. One question...when you loosen the handbrake cable, does the handbrake need to be off. Also do you have to do any resetting if the handbrake afterwards..
@@jonbertjustesen510 Thank you very much.
I have a suzuki swift 1.3ddis 2005 - are my rear brakes the same as these?
Brilliant video by the way - I am not great at mechanics but I could follow your instructions easily.
Thanks.
Steve
I want to know also
Very useful 👍
Thanks !!! this video helped me for Suzuki Aerio 2006
Hey, i did the same thing with my 2006 aerio also, but now my hand brake is loose. Did you have that problem also? if so, how did you fix it? thanks
@@marshalldestro did you figure out the loose hand brake issue?
how or what do i do if i got a little pin hole in the brake cylinder seal or cap whatever its called and can i replace it do i buy a new cylinder all together or can i buy just the little rubber seals and are they hard to replace
Thanks . You are a life saver. keep on !!!
Nice video. Same brake drum design used on Suzuki Ignis I (FH) 2000-2005.
Thanks for your comment. I have a Wagon-R and your comment makes me think my brakes will be same as in this video.
Very helpful, thank you, and happy 2019 to you from NZ.
Where can I get new rear wheel cyclinder online?
Все супер. Единственное что плохо,ты не смазываешь детали =( смазкой
Could this be a reason why I hear a horrible knock from the rear of my car while driving every so often?
thanks for video. reduce the puzzle time when I`ll change mine.
Есть разница по замене тормозных колодок, когда коробка автомат или механика? И что делать с ручником? надо не надо его ослаблять?
Честно не. Огу ответить на оба вопроса. Не знаю.
Great Video Thanks. Really Helped Me
Спасибо большое пацаны 💯
Здравствуйте. Скажите, а у вас есть видео как отрегулировать стояночный тормоз на сузуки sx4 задние тормоза барабанного типа?
Нет.
Ese trabajo requiere de limpieza y no lo hizo y al final no mostró el ajuste de frenos.
What is the bolt size to remove the drum??? It says in description but there is NO description... :(
M8
volvosweden Thanks! BTW... I like your videos... working on Aerio...
Hi, I did this job on my 2006 aerio (lania) but I forgot to remove the 10mm bolt for the hand brake cable, instead I detached the cable from the bracket it attaches to. I put it all back together properly, but now my hand brake is very loose. Is the best way to adjust it to go through the console near the brake lever inside the car like I have seen in other videos? Or is there a different way to do it.
Thank you and great vid!
Any hardware store. Its M8 bolt
@@volvosweden Thanks. I was guessing it was M8 but it's good to know for sure.
Liana
Life
In
A
New
Age
It's very helpful and nice video!
Which no of remover bolt
I know you said the screw size was in the description but I can't find it lol. Can you tell me what size they are? Many thanks. I like your videos.
M8
***** many thanks
In Indonesia the rear disc brake model frm OEM
Very very nice explained vediou Tq sar.
My sx4 has disc at the back. Do you a have a video? disc with emergency bake shoes.
+anthony serra Sorry no. But its not difficult.
Great video and a big help thanks
Unfortunately there's two variants of SX4 drum brake, first gen cars sold in the UK (made in Hungary I think) have a different adjuster mechanism which isn't as reliable as this and a bitch to set properly.
Good to know. Thx for sharing this info here for others.
And use a completely different brake pad as I found out with my 2008 Grand Vitara... Oem part 53200 65J01 says its not for my car, even though it is literally whats installed
Thank you soo much help me a lot
Thank you for sharing.
Do you have to bleed the rear breaks after you replaced them
+Miguel Fernandez no
Is bro from Chernobyl, got 3 hands 🤔
Very good! Thank you.
Where can I find the spring kit for this?
+Dantheman68 www.ebay.co.uk/itm/331502298110?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Nice vdo. Well explained.
thank you
Nice Thank you
Good video, cheers.
nice video. Thanks!
Thanks
Yeeeeee... that russian accent
Niko ..
А хуле ты думал, ваши гайки крутят?
thank you !
Thanks heaps
Thx ALTO LOT. Works for Alto 2005 aswell. Very much the same, if not 100% the same.
BUT.... You need better tools, SIGH.
пацаны говорите по русски все здорово делаете спаибо
Super bro
Можно это видео на русском?
К сожалению не будет. Если есть вопросы могу ответить.
можно всё ваше видео на русском языке о сузуки? Вы ведь на русском говорите!
Теперь будете озвучка на двух языках. Спасибо за Ваше внимание.
9:49 гайки одевай))) русский язык))
+Получай Кайф Что поделать. Три языка знаю и все не полностью.
наверное в голове путаются слова и мысли?
stop sayin "so" !
Does the rear side suzuki swift 4x4 have abs sensors.