Perfect! I've been trying to do this, do that, remember it, forget how I figured this and that, start over, repeat... Now I have your spreadsheet. Thank you so so much!!!
Its fun playing with the options i have clicking on the link. I have the potential to hit 81.38 mph with a set of gears and tire sizes i have... or i could go full torque and gear down to 47.58 mph and a baby tractor pull lol! THUMBS UP AND SUBBED
hi i have a 15tooth steel pinion gear with a 48tooth steel spur gear in my buggy.question is that the width of the pinion gear is wider than that of the spur.Therefore,do i sit the pinion in the centre of the spur gear or should it be flush completely with the spur? thanks for any help rendered! cheers!
Center it 4 shure, if you flush mount it, under load if the armature happens to move alittle vertically you may not have full mesh allowing penion to rip teeth out ✌️
I have an arrma senton 4x4 Mega and put in the Traxxas Velineon 3500 brushless motor with matching ESC brushless in it and it won't stop clogging what should I do
Gotta Have this program, amazingly it does the same thing for RC that My Bully dog does for my Chevy in gearing final drive and speedo computations, Most excellent indeed!!!!
So it works for you? I'm usually leary of stuff like this but was looking for comments about anybody else who has already done it ,I think I'll click it 😁✌️
How would this sheet apply to an old evader st with a 23T/48P Pinion 78T/48P Spur Gear 18T/48P Top Gear 29T/48P Idler Gear and a 48T/48P Diff Gear? 2S Lipo 3900KV Brushless Motor?
quick question I have to serpent buggy 811 with the 1850 KV motor 120 amp ESC I'm trying to set this up for drag racing what gearing should I use 4S capable
+RALPH FOX Hi, I cant give you exact gear ratio but i think you have a lot of torque with your combo und you should try different pinions. You can get better acceleration not only using different pinions. Good RC contoller, good esc, short and big esc wire, good big lipo/esc connectors do it too. The serpent buggy is good RC car for RC tracks. What distance do you want to drag race?
+RALPH FOX Lock all diffs. Need very high grip tires. I think when you reach brutal acceleration you will need wheelie bar. Have you tried allready something? What is the spur and pinion gear now?
Liked and subbed, cheers for the chart too. I Have a hobbywing Max 6 ESC, 4985sl 1650kv brushless motor. Atm with a 48T spur,17t pinion. 10t bevel small and 40t bevel. How far can I upgrade without frying it? In 1/8 6s truggy
very helpful file,thanks .but i tried to calculate my hpi savage speed using this ,it shows ridiculous speeds like 100++km/hr which is not even close to what i m getting on track.
What kind of track ? dirt ground ? asphalt only ? asphalt with rain ? poor quality asphalt ? mud ? And also depends what electronics you have good quality cheap quality how old is your battery you charge fast the battery or slow. How much C discharge is your battery. You must make some speed runs with no wind in very straight road with no uphill or downhill. You play in hot weather very hot weather cold or very cold weather ? Each parameters and all together play their roll in the total amount, so remember all those parameters and you will take different amount each time. When i was playing with my nitro engine an rc store told me that an engine with the same settings gives you different amount on cold weather and different amount in summer and of course different temperatures every time. Exactly the same is with the electric rc models. Also when you play with your rc model in track or in freemode runnings you have different temperatures each times and different levels of pushing in your rc model.
Hi, please give me your spur gear and motor pinion gear specs.(maybe ebay link etc) I want to try these out. My spur is plastic and runs out very quikly. Yous looks like metal and much wider.
I have a 4x4 Ruckus Truck its brushless and has a 3300kv ABC TAZER Motor WITH 2 COOLING FANS AND a 5000mAh 100c 7.4 Battery in it looking to get later on a 4000kv Motor WITH 11.1 Battery put in it
Hi can you tell me? which model you have mounted instead of original relly dune fighter spur gear and pinion ? where you can buy these metal gears? you give me some link? thank you
What if I told you this is my exact setup in my RC car 4 pole 2150VK 6s 160amp ESC 😍 she rips and I clocked it at 100+Kmh I haven’t been able to send it flying yet because I’m scared lol this is my first RC car and I built it for speed off-road and on road 🤗
I hear ya, but it's "YOYO" (you're on your own!). listen for 75-80% of no load rpm's when it's full throttle is usually a happy start point, add or subtract pinion teeth for longer or shorter tracks ("legs vs snap") and check motor temp at 4 minutes. if you cant touch it 4-5 seconds you're geared too darn high! it's not very "tekky" but I've been doing it like this 30+ years with electric cars and boats.
No see. You will burn motors and tear through gears. None of this makes sense from an experimental standpoint. However, it's a good reference guide if you have a good understanding of the material that you're installing.
Awesome BoloRC, I include in my chanel a video explain your video/sheet. After i send to you. I have a suggest to you. include in your sheet a delta temperature, It is not difficult use one motor analyser. Tks see you!!
+Nicholas Byrne-Chinn Hi, its not easy thing with the metal gear. Search "SSA Modul 1" 36 or 40 T. 40T dont fit and you need to mill the chassis plate. 36T fits but for reasonable gear ration you need pinion about 9T.
126mph...that tiny thing...that toy will go missing before your eyes..hahaha...damn you boosted the wheel size like crazy hahahahahaha...that motor is definitely in trouble...
Perfect! I've been trying to do this, do that, remember it, forget how I figured this and that, start over, repeat... Now I have your spreadsheet. Thank you so so much!!!
such huge amount of info in just 3mins! thank you !
Appreciate that! Very Helpful. Need more vidoes like these or a chart👍
Thanks for this,very useful.
Calculations were good enough for me. Thanks for the video. Shared with my MeWe RC group.
idk my traxxas slash 2wd trans gearing. i converted over to brushless so was origanaly was geared for the xl-5
Danke für den tollen Download!
very good , like
Its fun playing with the options i have clicking on the link. I have the potential to hit 81.38 mph with a set of gears and tire sizes i have... or i could go full torque and gear down to 47.58 mph and a baby tractor pull lol! THUMBS UP AND SUBBED
hi i have a 15tooth steel pinion gear with a 48tooth steel spur gear in my buggy.question is that the width of the pinion gear is wider than that of the spur.Therefore,do i sit the pinion in the centre of the spur gear or should it be flush completely with the spur? thanks for any help rendered! cheers!
I would go with the center.
Center it 4 shure, if you flush mount it, under load if the armature happens to move alittle vertically you may not have full mesh allowing penion to rip teeth out ✌️
Really needed this spread sheet. Thank you very much!
This is great. No more guess work. You are awesome man. 👍⏲
I have an arrma senton 4x4 Mega and put in the Traxxas Velineon 3500 brushless motor with matching ESC brushless in it and it won't stop clogging what should I do
Awesome 👏
I have a L969 termanater, my question to you is how many gears should I get for it to go faster. Or what kind of battery and gears to use for it.
Thank you so much for the excel file, it's helping tons
Very nice !
great worki'm a noob, so i appreciate detailled explanation :) thank you
Hallo Bolospeed
Welches Hauptzahnrad Modul 1 hast du genommen was auf die Welle passt und wieviel Zähne hat es.
Gotta Have this program, amazingly it does the same thing for RC that My Bully dog does for my Chevy in gearing final drive and speedo computations, Most excellent indeed!!!!
Great video and I have subbed to your channel
So I'm a no it to buy a 5400KV motor and I was wondering what gearing should I use
Nice program but what if I’m using a hot racing solid spool? There’s no diff gear ratio to input
What model rc car is this i have one just like this but i don't know the model?
Great video brother great tips . I've liked and subbed you my friend because I think I can learn alot from your videos well done ✌👍✌😁
Thank you very much for the calculator 👍👌10+
So it works for you? I'm usually leary of stuff like this but was looking for comments about anybody else who has already done it ,I think I'll click it 😁✌️
What application do you use for get illustration speed?
thas was very handdy.nice work and info sharing.😄
+SPEED TUJUH
Thank you! Your welcome
great intrusion video awesome stuff great channel Sir :D
How would this sheet apply to an old evader st with a 23T/48P Pinion 78T/48P Spur Gear 18T/48P Top Gear 29T/48P Idler Gear and a 48T/48P Diff Gear? 2S Lipo 3900KV Brushless Motor?
Hallo, welche Übersetzung von Motorritzel und Hauptzahnrad für die geringstmögliche Geschwindigkeit ist bei Reely Dune Fighter 2.0 brushless möglich?
Friend! And how to calculate the speed if the spur has a two-stage structure?
I'm having a very hard time finding the diff pinion gear and diff ring gear on my arrma vortex. Does arrma cars not have these ?
Yo I want that calculator but link is broke it's. Really good xx
What is the deffrence between 16t and 19t
quick question I have to serpent buggy 811 with the 1850 KV motor 120 amp ESC I'm trying to set this up for drag racing what gearing should I use 4S capable
+RALPH FOX Hi, I cant give you exact gear ratio but i think you have a lot of torque with your combo und you should try different pinions. You can get better acceleration not only using different pinions. Good RC contoller, good esc, short and big esc wire, good big lipo/esc connectors do it too. The serpent buggy is good RC car for RC tracks. What distance do you want to drag race?
+BoloSpeed RC yes I want to set this up to drag race
+RALPH FOX Lock all diffs. Need very high grip tires. I think when you reach brutal acceleration you will need wheelie bar. Have you tried allready something? What is the spur and pinion gear now?
+BoloSpeed RC I just found out I'm running 46 spur 20 pinion
BoloSpeed RC
Thanks for doing this really thank you :)
I'm a little late to the party here, but the download link is not working for the calculator. Is there any way you can send me the link?
Does anyone know the model and brand of the vehicle shown here? I have exact one but I got it second hand and have no clue what it Is.
Can you up link load Exell file again ,Thank you now can't load
Liked and subbed, cheers for the chart too. I Have a hobbywing Max 6 ESC, 4985sl 1650kv brushless motor. Atm with a 48T spur,17t pinion. 10t bevel small and 40t bevel. How far can I upgrade without frying it? In 1/8 6s truggy
How do you learn the dimensions of the spur, tires, and pinion?
Awesome, guy!
very helpful file,thanks .but i tried to calculate my hpi savage speed using this ,it shows ridiculous speeds like 100++km/hr which is not even close to what i m getting on track.
What kind of track ? dirt ground ? asphalt only ? asphalt with rain ? poor quality asphalt ? mud ? And also depends what electronics you have good quality cheap quality how old is your battery you charge fast the battery or slow. How much C discharge is your battery. You must make some speed runs with no wind in very straight road with no uphill or downhill. You play in hot weather very hot weather cold or very cold weather ? Each parameters and all together play their roll in the total amount, so remember all those parameters and you will take different amount each time. When i was playing with my nitro engine an rc store told me that an engine with the same settings gives you different amount on cold weather and different amount in summer and of course different temperatures every time. Exactly the same is with the electric rc models. Also when you play with your rc model in track or in freemode runnings you have different temperatures each times and different levels of pushing in your rc model.
do you still have that excel file?
Thank you!!!
My motor is rated in turns, how can I convert to kv?
I also know my drive ratios, do I still have to count gears?
Same too ,i dont know what kv at my dinamo
Hello, your video is very helpful. Thx a lot! Your model of Spur Gear seems very good but where do you buy it please ?
Hubert Monin good
what is the best gearing for 7700kv for a vettera v100
hi.. i dont have a lipo battery and a brushless motor...how can i measure my speed with a brushed motor and a normal battery?
Gabriele Colleo u aint living then most yours is going is 30 max
Wow! Great and very useful video. Those gears looks good. Can u post link for these two please? Thanks
you need to do a running video of it
App ? Mit freundlichen Grüßen
Hi! Woher hast du denn das Hauptzahntad? Es sieht nämlich schön massiv aus.
Hi, please give me your spur gear and motor pinion gear specs.(maybe ebay link etc) I want to try these out. My spur is plastic and runs out very quikly. Yous looks like metal and much wider.
What mod is the pinion gear?
Hey man, geiler dunefighter von conrad😉
How do I download this onto my iphone x..? I hit the bolo speed download link.. and It brought up a page but nothing is adjustable..?!? Thanks
Chinaoreo iphone x is trash= should have got note 9, fuck off you show off.
Where can i download this application
ua-cam.com/users/redirect?redir_token=tsF5f_rX_fNLAAqDCEAyMNjwJ3V8MTU3NDQ5MDIyMUAxNTc0NDAzODIx&v=u6fnBWtDFP0&q=http%3A%2F%2Fwww.bolospeed-rc.com%2Fdownload%2Fbolospeed_rc_calculator.xls&event=video_description
Put the big one on the moter and the small on the spur plzzzzz
I have a 4x4 Ruckus Truck its brushless and has a 3300kv ABC TAZER Motor WITH 2 COOLING FANS AND a 5000mAh 100c 7.4 Battery in it looking to get later on a 4000kv Motor WITH 11.1 Battery put in it
205 Kmph. Thats just insane.
Does the math change if its a 4x4?
good to see you have to take your entire truck apart
Wtf? Just look up the transmission setup on the internet
Hi
can you tell me?
which model you have mounted instead of original relly dune fighter spur gear and pinion ?
where you can buy these metal gears?
you give me some link?
thank you
What formula is used in the Excel file?
Gear ratios fórmula
What if I told you this is my exact setup in my RC car 4 pole 2150VK 6s 160amp ESC 😍 she rips and I clocked it at 100+Kmh I haven’t been able to send it flying yet because I’m scared lol this is my first RC car and I built it for speed off-road and on road 🤗
Whats the apps in phone?
cannot download the excel
This is hardcore stuff
Mkash mas udah di kasih tau
app??
Link won't work for me
Ich möchte fragen, wo man den Körper gekauft.
+Vojtěch Wolf Look here, the body is self made: ua-cam.com/video/MO70bGrd20U/v-deo.html#t=00m54s
+BoloSpeed RC Thank you but I have a plastic body shell. And I do not know where to buy your here.
+Vojtěch Wolf The whole car RTR is from www.conrad.com
+BoloSpeed RC And you do not have an exact link?
+Vojtěch Wolf
cage: www.conrad.com/ce/de/product/1301701/Reely-539084-Ersatzteil-Ueberrollkaefig?ref=list
body: www.conrad.com/ce/de/product/1301681/Reely-539088-Ersatzteil-Karosserie-und-Dekor?ref=list
Why don’t you just use a small sprue gear and a bigger gear connected to the motor for more rpm
Very interesting, fan we have the excelle file
+Marc Borremans I'm glad, nice, thank you!
App name can't find it ????
u got one for brushed
I hear ya, but it's "YOYO" (you're on your own!). listen for 75-80% of no load rpm's when it's full throttle is usually a happy start point, add or subtract pinion teeth for longer or shorter tracks ("legs vs snap") and check motor temp at 4 minutes. if you cant touch it 4-5 seconds you're geared too darn high! it's not very "tekky" but I've been doing it like this 30+ years with electric cars and boats.
No see. You will burn motors and tear through gears. None of this makes sense from an experimental standpoint. However, it's a good reference guide if you have a good understanding of the material that you're installing.
could of made it much faster if u switched the gears that connect the drive shaft with the motor
why the music no in depth explaining sorry bro
I dont trust the DL link for the excel file can some one vouch for it or convince me its safe? pls
It's legit so far. Nothing more than an Excel-file.
thank you for this !
Thx for watching!
BoloSpeed RC
๖ۣۜ༻Ŧнє MODELISM MASTER ༻ not for long no :)
That is the filthiest diff I've ever seen in my life
Awesome BoloRC, I include in my chanel a video explain your video/sheet. After i send to you. I have a suggest to you. include in your sheet a delta temperature, It is not difficult use one motor analyser. Tks see you!!
Bro namanya apa yab kalau biat mobil remot dinamonya
I have the same Dakar RC. where can I buy the upgrade gear and which battery would you recommend? Thank you
+Nicholas Byrne-Chinn Hi, its not easy thing with the metal gear. Search "SSA Modul 1" 36 or 40 T. 40T dont fit and you need to mill the chassis plate. 36T fits but for reasonable gear ration you need pinion about 9T.
+Nicholas Byrne-Chinn I think Lipo 2S 4000-5000 mAh and 35-45C works well
THANKSSS!!! XD
Kalau beli dinamonya caranya gimna ya bro
Trisno Saputra dibukalapak ,tokopedia bnyak
What about acceleration
Where did u get that steel spur gear i need one ,too but i can't find one
Ähhhh er kann auch Deutsch. Aber mich würde das auch interessieren
nitro engine?
You can measure the rpm of the motor
Vďaka, super app
nice vid.... if you could talk... and do a music vid :/
That calculator is not good if I give in my numbers I should go 250mph 🙄 In real I did 131mph.
waaooo good wryy
put the wrong kv in
Marcus Lyons
Nope ,Dunefighter Brushless hat 3560KV !
Marcus Lyons No he didn't..
126mph...that tiny thing...that toy will go missing before your eyes..hahaha...damn you boosted the wheel size like crazy hahahahahaha...that motor is definitely in trouble...
like
bigger pinion makes it go faster.... not vise versa
You put 4S on that car you need titanium differentials!!!!!! :-D or drive two times and buy a newone :-D
Why you destroy the poor Dune Racer???