Seat Slider Installation Guide for Sim Racing - Racing Cockpits

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • How to install seat sliders for your sim rig featuring NRG seat and sliders mounting on a RCP Cockpit PRO.
    You can see our selection of cockpits and seats here:
    racingcockpits...

КОМЕНТАРІ • 23

  • @kharner92
    @kharner92 14 днів тому

    we were really struggling getting our heads around both sets of SimLab instructions, this video hit like an ice cold beer on a warm summer's day. thanks so much!

  • @the_normsk
    @the_normsk 9 місяців тому +7

    I got to the seat install part of the instructions and I was like, I have no idea what I'm doing! then I found this video. This is invaluable Eric! thank you for this. You explained it really well, though of cause I installed the sliders already on the rig before I looked at the seat per the instructions. Still wasn''t too bad. Biggest issue? Dragging two beers before had made following the instructions harder! LOL.

  • @xxmuffins352xx
    @xxmuffins352xx 6 місяців тому +2

    Thanks for the video on this. It looks like the Simlab GT1 Evo instructions have you mount it all on the rig first and then install the seat. However, your approach seems to be a lot easier especially for a beginner doing this the first time. Looking forward to trying out this method once my seat and seat slider kit arrive!

  • @ragnarlodbrok3
    @ragnarlodbrok3 24 дні тому

    muchas gracias!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! de verdad, este video me ha ayudado muchisimo

  •  Рік тому +6

    Very well explained. 👍

  • @macho8303n13
    @macho8303n13 11 місяців тому +2

    Hey here from jed channel hopefully soon i will be looking into getting a setup

  • @exitspeed_
    @exitspeed_ 8 місяців тому +1

    You rock! Thank you!

  • @IgorHolovka
    @IgorHolovka 3 місяці тому

    thank you for the video, was so useful!

  • @DJHeroMasta
    @DJHeroMasta Рік тому +1

    I hope the photo shoot went well!

  • @edreed5571
    @edreed5571 5 місяців тому

    U the real mvp, king

  • @rachedguerafi938
    @rachedguerafi938 4 місяці тому

    thanks alot for the guide, its the best one i could find on youtube. however, i have to ask why is your seat flexing alot while you are driving, is it not tightened enough ? what is the cause ?

    • @RacingCockpitsWarehouse
      @RacingCockpitsWarehouse 4 місяці тому +1

      A keen observation! You can also see that the cockpit itself is moving as well. That's from the Sigma Integrale motion system on our demo setup.

  • @andotski_
    @andotski_ 11 місяців тому +1

    yeah i definitely have my sliders upside down 😂

  • @Titan145
    @Titan145 9 місяців тому

    You ever had an issue with the brackets on these prisma seats being misaligned? I got my slider on and it’s kinda bent more towards one side. The only thing that looks off to me is one of the brackets seems like maybe a half inch closer to the front of the seat

    • @RacingCockpits
      @RacingCockpits  8 місяців тому

      Yes, this is a good thing to bring up. This is somewhat due to the nature of the NRG molded seats. We designed our seat rail extrusions to be fully adjustable and independent so you can still get everything straight even if the fronts or backs are closer or different side to side.

  • @matthewwhite5158
    @matthewwhite5158 7 місяців тому +1

    Torque specs: 1.5 ooga's

  • @deadmanwalking1930
    @deadmanwalking1930 7 місяців тому +1

    Why all these tutorials show side mount way, and not base mount. 😮 also you say push down with thumb to get them to slide, but I can't find any part that does this.

    • @RacingCockpits
      @RacingCockpits  7 місяців тому

      The side mount option is popular because it allows for easy seat adjustment for height and angle. Nothing wrong with a bottom mount though!
      The part to push down on, as mentioned at 2:30, to get it to slide is the silver latch that the slider bar attached to later.

    • @deadmanwalking1930
      @deadmanwalking1930 7 місяців тому

      ​@RacingCockpits I will order side mount brackets and return the slider. I ill use in fixed position, its only me that uses the rig. I never want to see another seat slider in my life.

    • @jonneymendoza
      @jonneymendoza 7 місяців тому

      Why?@@deadmanwalking1930

  • @ryleighjulina5724
    @ryleighjulina5724 11 місяців тому

    "Promosm" 😍