DIY Sliding Deck / Dog Gate
Вставка
- Опубліковано 25 жов 2019
- My brother wanted a low sliding / rolling gate to stop the pet puppies getting up the side passage, but this design would work great on a deck or veranda too. Merbau decking is a great outdoor material and tough enough to withstand animal attention which lent itself well to this application. I used Kreg pocket hole joinery which allowed me to hide most of the hardware and using a guide box and rollers allowed for the gate to open all the way.
Trying something new and giving you a break from my over-complicated explanations this time, sit back and enjoy this easy, chilled out build you can knock out in a weekend.
If you'd like to like to give this a crack, there is now a full step-by-step Instructable guide with free plans, photos and tips to guide you through. www.instructables.com/id/DIY-...
If you are looking for tools for this project, I've got you covered with these Affiliate Links (They cost no more but help support the channel).
The Full Fixit Fingers Tool Shop (US) - www.amazon.com/shop/fixitfingers
Here you'll find almost all the tools I use in my shop from the Bosch Mitre saw to Glue and Sandpaper :D
Kreg Australia Gear at Carbatec: www.carbatec.com.au/brands/kr...
The Aussie Makita Tool Shop: amzn.to/2ZiTPQ9
The UK Kreg Tool Shop - amzn.to/3CsvzsT
The UK Makita Tool Shop - amzn.to/3EA9yKz
Fixit Fingers Merch: / shop
Tools used in this Build (Amazon USA):
The Full Fixit Fingers Tool Shop: www.amazon.com/shop/fixitfingers
K5 Master System - amzn.to/2A3elaE
Kreg Face Clamps - amzn.to/2LRXGcS
Kreg Square-Cut - amzn.to/2TB00Jm
Kreg Pocket-Hole Clamp - amzn.to/3egWRGF
Kreg Screws Starter Kit - amzn.to/2WZUfqJ
Makita Circular Saw - amzn.to/2LSR5id
Makita Router (with Plunge Base) - amzn.to/2XVfUzU
Makita Random Orbital Sander - amzn.to/3cVY5Xr
Makita Drill & Driver Kit - amzn.to/3efxAwD
Follow Fixit Fingers:
/ fixitfingers
/ fixitfingers
#Gate #DIY #Carpentry - Навчання та стиль
Hello my talented friend.
A beautiful door design with sliding and wheels. lock iron is also very stylish. Puppies will no longer be able to climb the bypass you did a good job congratulations. See you. Big greetings.
This is one of my most popular builds... I think they may be to do with the puppies ;) But I am glad so many people enjoy it.
@@FixitFingers Yes, I think it's normal for him to be popular. Nice design. See you.
Beautiful gate! Elegant and practical! 👌
Thank you very much Stef! It matched the existing privacy screen really well... and the puppers haven't beaten it yet 😊
Love it. Have been using it often for a month . So far so good.
Oh wow! You're the first person I've actually heard make it. I'd love to see yours. Can you send me a picture or two on Facebook, Instagram or James@FixitFingers.com ? That would be awesome 😍
Beautiful work, well done !
Thanks guys! Glad you enjoyed. I'm making a similar design bench seat right now ;) Hopefully out on video next week.
You made a fine gate there James, good for the doggies and for humans as well! I love the smooth sliding action!
Dipping into some vintage episodes Juliet! It seems to be the secret to a popular video... Add cute furballs 🐶🐶🐶 😊
@@FixitFingers Apparently! When I saw it on my screen, I thought you just released a video...I enjoyed every minute of it!
Awesome yet very simple design. Well done, sir
Cheers Ed. My brother recently sold this place so I wont see it again. It would be very funny if the new owner one day stumbles on this video... 😅
This was an AWESOME video! Thank you so much.
Glad it was helpful! If you need more details click the "Instructables" link in description for free plans and a step by step build guide :D
Awesome dude, great job! Thanks for sharing
Cheers mate. I think most people come just to watch the puppies at the end 🤣
Thanks for stopping by, I am really happy with the design of this gate and it is holding up well. No puppy escapes yet! If you enjoyed the video or found it helpful please do give it a like (or a *"Thanks"* if it REALLY helped!) and if you'd like more content like this feel free to subscribe for regular novice woodworking projects and reviews. Cheers, James
PS - Here is the video on prepping the Merbau decking... very important to stop tannin bleeds: ua-cam.com/video/FKBW-dkQr9M/v-deo.html
Tag me in pictures if you use Instagram or Facebook! I would love to see your version 😄
Like the gate mate turned out awsome. Nice video style aswell
Cheers Ren, been stealing inspiration off the Pask Master Style. People seem to like when I shut my yap so on simple builds I think I'll try this again ;)
Great video James the gate looked like it was much needed, and i love those puppies.
As for the non commentary doesn't really bother me either way, whatever you feel like doing that's the best for you to do. Again a great Gate build.
Barry (ENG)
Thanks Barry, they are rat bags but darn cute. Trying to strike a balance between information and watchable-ness. Fun to experiment with different video styles.
I wish I could give you a thousand likes for this mechanism
Thanx Tanzeela, good luck if you use the design 😊
Fantastic video James, I’m wow 😮impressed with this & you’ve proved just how awesome pocket hole joinery really is. Loving this video format as well 🍻👍👍👍
Thanks Dirk. I will learn "real" joinery as I progress, but this is a practical project and only needs a practical solution. The only thing I think I'll need to keep an eye on is the Kreg screws as they are not galvanised and may get a little wet. I'm hoping as they are buried and oiled I think they'll be fine for a number of years. My goal for my 2nd YT year is to mix up my presentations a bit with the odd "Quick" video and "silent builds" like this to break up the chatter ;)
Glad I seen this , now to do the same .. cheers great video
Tag me in socials if you get it done Kev, love to see other people's take on my builds.
Very Nice!!!
Cheers Frank. I'm working on an Instructable for this as we speak to flesh out the details.
Nice job !
Morning Cliff, thanks mate she came out well 👍
Nice job man!
Cheers Mark. About due for a re-oil. I'll visit soon and see how it held up.
Hermoso portón. Un genio!!! Y los perritos felices.
Muchas gracias! Son perros muy mimados 😁
@@FixitFingers me alegra saber eso. Un saludo
Brilliant! Thanks!
Thanks Frank. I visited my brother the other day. After a year in the Aussie sun and rain and she's due for a light sand and re-oil but otherwise holding up well.
Love it!!
Cheers Dakota! Just saw it again the other day visiting my brother. One year on and time for a new coat of oil but otherwise still no puppy escapes 🐶😊
Those are some cute puppies! And a great design 👍
Cheers Grant, it was a tricky one to research as I couldn't find much similar on UA-cam but came out really well.
@@FixitFingers I thought of something similar for a baby gate, but couldn't figure out a good way of keeping it straight against the wall. I think you made it perfect! I hope it keep up with the elements 👍👍
@@TheGrantAlexander me too. Main concerns are the wheels, they are steel but can also be replaced easily, and the Kreg screws as they are only zinc coated. The other hardware is all galvanised so should be sweet...as long as he remembers to oil it each year 😅
@@TheGrantAlexander oh! And he has a two year old too...even without the catch the weight makes it baby safe... Until he can climb 😂
@@FixitFingers should be alright, the wheels will be the weak point for sure! My friend made a sliding gate for his house (different design completely) and the wheels only lasted a year (Well one Canadian Winter, so you shouldn't have that problem)
Love the design and love the puppers. I laughed at the 6.06 mark though. That’s why I avoid Phillips head screws. Robertson screws are my choice. 👍🏻
Personally I prefer commentary in vids, however this one was so straightforward it didn’t really require any.
Thanks Rhys, the boys are naughty little buggers, but they are cute as. This was actually my first 'non-talky' build as I was trying something new to keep the time down and for exactly the reason you said that it's an easy one to follow along. Apart from Kreg screws Robertson are hard to come by in the big box here, I might have to look online when my current Phillips supply runs low 😊
great job
Cheers Carlos, I still really like this design 😊
good work
Cheers again Frank! This was a fun build.
Belo trabalho, vou fazer um portao desse na minha casa para separar meus caes menores dos maiores.🇧🇷🇧🇷🇧🇷
Obrigado cara! Não tivemos fugas de cachorrinhos desde que foi construído;) Verifique o link na descrição para planos gratuitos que podem ser úteis.
Muito obrigado😊
nice job,
Thank you & Cheers JP. It's still holding up really well. No puppy escapes since installation ;)
Sliding on wheels is great
Much better than hinges!
@@FixitFingers yes
I have 3 dogs this is perfect
Cheers Eric, I hope it helps keep the puppers where they should be 😊
Very nice job Have you ever looked into the one that has an angle on the slide or a weight or a spring where the door is always under tension and automatically closes I only mention that because I have many dogs and losing a dog is a complete nightmare or keeping certain dogs separated from each other is also somewhat difficult
Hey! This was my first gate build but geez that's a good little idea. It would be tricky on this particular design as the gate is so heavy (and the ground uneven) that the amount of counterweight force needed would be high. I think you'd need a good track on the bottom to run smoother and perhaps use pine or aluminium.
@@FixitFingers I am planning on building a new deck this year with a focus on small dogs if I come up with a good concept I’ll be happy to send it to you
Awesome! Really interested to see the mechanism you come up with.
Did you line the guide box with felt or anything to protect the gate finish? Would that even work? Thanks.
G'day Paul, no, that was a decking oil I used and would recommend. It soaks into the wood so it wont rub off inside the guide box. I'd avoid using a film finish like polyurethane for this reason.
Hi there, thank you for uploading such an informative video. I have a question I am trying to get a gate built using decking board wood and they guy came back and said he cannot do it, it is too heavy - what do you think of that and is there a way putting wheels for sliding. Please help!
G'day Shaun, sliding gates are not as common as hinged gates, and yep, hardwood decking is quite heavy over this span, but a wheeled design like mine here should overcome that. It's worked well, only issue is stones and sticks on the wheels path can foul it. You could add a track, or just keep it clean ;) The gate is a bit heavy to slide compared to hinged gate, but doesn't take that much effort.
*Hello there, I have requested your DVDs, for simpler and quicker approach to manufacture a shed **Allmy.Tips** I trust the substance are as you guaranteed it will be. Just I'm worried with the substance, it won't be anything but difficult to settle on a decision from the various plans.*
Im gonna go with Toilet paper?! hahaha How about you? ;)
Desde GDL MEX , como puedo conseguir la contrachapa o seguro que le pusiste .
Gracias
Lo siento Héctor, esto no se tradujo bien en Google. Creo que preguntaste de dónde saco la madera contrachapada. Esta puerta es un material de cubierta común en Australia. Podrías usar cualquier madera al aire libre local. Espero que esto funcione :)
I plan on using your plans and modifying the gate to fit my opening size.
How much bigger than the opening does the gate need to be in order for the guide mechanism to work properly?
G'day g'day. I'd say at around 10-15cm (4 to 6") it'd would work fine. I purposely made mine larger to act as a pot plant stand and give it a give more strength.
11:09 I hope the dogs didn't pay you in Smackos. 😜
Nice fence mate. Especially the 2nd opposing brace.
Hahaha no smackos, but as it was for my brother it was basicly materials plus beer money 😅
@@FixitFingers that's family rates. Nice. Anywho mate keep up the awesome work and I look forward to your next project!
I might be overlooking it, but do you have a cut sheet for the exact size you’re building?
Better than that, I have a full set of free plans and step-by-step instructions on Instructables :D Click the "Download PDF" button at the top of the page for the plans with full dimensions. www.instructables.com/DIY-Sliding-Deck-Dog-Gate/
@@FixitFingers thank you so much for the quick reply, I truly appreciate it. I was indeed overlooking it. We love the look! You are a true craftsman, and are very talented.
@@jmoore4245 good luck with your build! Main warning... if you use hardwood like I did it will be HEAVY 😅 Outdoor grade pine probably a better choice in many instance. Tag me in photos once it is done on my socials, I love to see other folks takes on my builds. Good luck! :D
I have a 4 foot opening I want to close between my garage and neighbours fence
This'll work! - Full free instructions here: www.instructables.com/DIY-Sliding-Deck-Dog-Gate/
Where did you buy the bottom runner and wheels? We want to build a similar type gate.
G'day mate. No bottom track on this design. Here are the step by step instructions and plans if you're going to build one similar - www.instructables.com/id/DIY-Sliding-Deck-Dog-Gate
Oh and these wheels are similar to the ones I used amzn.to/2TtrXmv
@Erin K no problems Erin, check out the Instructable link above for full plans and instructions 👌
DIY my ass your a damn pro!
Don't let the pros hear you praising the use of pocketholes ;) hahahaha Thanks mate, came out really well. My brother has now sold the house so I can't check it any more but last I saw it after about 3 years installed it was holding up really well. Cheers!
what lock did you use. Thank you
Hi Antonella, it was this one - amzn.to/3ASbNXg 😁
Could u please build me one? I absolutely love it!
Ha! Where are you Chris? Not outside the realm of possibility in Sydney ;)
@@FixitFingers I'm actually in Canada.
What u did is exactly what I need. Love that so much bro!
Yeah...that would be an expensive callout fee... hahahahahaha I lived in St John's briefly, but even that barely counts eh? ;)
How wide an opening would this work on ?
That gate is about 1.1m (3.5 feet) wide. That design could probably be adapted to go wider, you're just going to need an extra vertical brace at the back and an extra wheel . It's pretty heavy though in hardwood, a 2m / 6ft gate would be getting close to the limit I think.
anyone know where to get Merbau in the US?
Merbau comes from SE Asia and we grow a bit here in Australia too. It is common and cheap here but probably rare in the States and more expensive. It's not that great a material (hard and brittle) but makes great decking. Any decking boards you can get your hands on should be fine for this design.
Is MDF cheaper than wood?
Yes much cheaper, but for outdoor work I'd avoid it as it doesn't like moisture. Decking planks shouldn't be too expensive and come in the right dimensions. (Apologies my first answer I edited I assumed was for a different video :P)
Did the gate scratch when you rolled it under that support
No, not really. The good thing about that finish is an oil, not a film, so it doesn't scratch off, it soaks in.
@@FixitFingers thanks man, I couldn’t figure it out
You need to reapply it every so often (especially if it sees a lot of sun) but it only takes a quick light sand and bam, good for another year or two.
do you have a guide on the floor?
No, not in this case. The concrete is flat enough and the top guide box keeps it rolling straight. The only annoying bit has been little rocks getting in the way, but then they'd probably foul a guide track too.
@@FixitFingers I'm good for you, very nice job. I subscribe :) thank you very much.
@@walteraquino6797 Cheers Walter, good luck on your build!
Is it sturdy on the other side seems like it's not.
How do you mean "other side" Jose? It's a very sturdy gate. Very little flex and it's all screwed together so one face is just as solid as the other. The picture in the thumbnail is the "Show Side" the back doesn't look as pretty but most gates suffer from this design.
@@FixitFingers i means like not where the rail is at the other side when fully close.
Argh ok, yes. The catch could be beefed up for sure, but as it only needs to stop the puppies and at the time a 3 year old boy, the catch was not super important. (The weight of the gate alone would almost have worked. You could easily strengthen this aspect of it. Cheers for the feedback!