You just saved me a big headache! I was having same problem from missing clip, thought Id gotten another bad clockspring but luckly used clip from old faulty unit now all is good thank you sir
Another good one! That's the way we somethimes fix cars. Customer woun't pay for proper fix. But I make sure he understand the way I'm gonna fix it, to take off responsibility from myself. The thing is, they somethimes go to another garage that would sell them a story about very cheap and proper fix with original parts... Greetings from Serbia.
Greetings. Your video is very helpful. I have a mercedes with the srs code B 1864 the resistance value in the ignition circuit containing component R12/2 front passanger ETR ignition squib is too high. What can I do to bypass this and turn the srs light off , thank you for your help
Very helpful I had code 9183 r12/1 resistance too low appear on my 2007 clk convertable after changing the drivers seat belt.....and loosing this clip! Now I know what is wrong, thanks
Hi crank I have cuestion my 2 front shock they have no leeks but is not going up ,air compressor working fine . I have cls 500 06 any idea what is wrong
I disconnected airbag when changing combination switch and now I have srs on. Should it dissapear when plugged in or you always need tool to clear it????
Здрасти. И аз имам проблем с едно SLK със светеш еърбег Грешките са 91А3 и 9243 The resistance value in the ignition corcuit containing component R46/1( front passenger is to high) Другата е R12/10(front passenger side airbag ignition squib ) is to high Къде да търся проблема, приятелю
You just saved me a big headache! I was having same problem from missing clip, thought Id gotten another bad clockspring but luckly used clip from old faulty unit now all is good thank you sir
Another good one!
That's the way we somethimes fix cars. Customer woun't pay for proper fix. But I make sure he understand the way I'm gonna fix it, to take off responsibility from myself.
The thing is, they somethimes go to another garage that would sell them a story about very cheap and proper fix with original parts...
Greetings from Serbia.
Благодаря за видеото ;) Аз мисля,че е доста полезно и ще помогне на много хора в търсенето и премахването на проблема с SRS malfunction .
Great video my friend, I never knew that the little plastic bit retracted the shorting bars, thanks for sharing your knowledge cheers sandy
Thanks for stopping by Sandy :)
Thanks for the help! If it works it is not stupid.
Greetings. Your video is very helpful. I have a mercedes with the srs code B 1864 the resistance value in the ignition circuit containing component R12/2 front passanger ETR ignition squib is too high.
What can I do to bypass this and turn the srs light off , thank you for your help
Ahhhh! Greetings from California.
Very helpful I had code 9183 r12/1 resistance too low appear on my 2007 clk convertable after changing the drivers seat belt.....and loosing this clip! Now I know what is wrong, thanks
Thanks Nigel !
Did the srs light automatically disappear or did you need a scan tool to clear it?
seatbelt too! Thank you!
Hello sir, i have the opposite issue, the squib 1 resistance is too high !!
Where can we get this plastic part?
Hi crank I have cuestion my 2 front shock they have no leeks but is not going up ,air compressor working fine .
I have cls 500 06 any idea what is wrong
Thank you for the video
I have srs problem on my w211
Code 9103
Have you the solution
Excuse me for my english
I am from Paris
Thank you
I disconnected airbag when changing combination switch and now I have srs on. Should it dissapear when plugged in or you always need tool to clear it????
I have a same problem. did you fix yours? How?
Thank you
Same issue… Did anyone manage to just clear the error code and light went out ? Thanks
is it safe to unplug the airbag when battery is connected? thanks
No unhook the ground
Awesome..
SRS for 2006 Mercedes module located
Здрасти. И аз имам проблем с едно SLK със светеш еърбег
Грешките са 91А3 и 9243
The resistance value in the ignition corcuit containing component R46/1( front passenger is to high)
Другата е R12/10(front passenger side airbag ignition squib ) is to high
Къде да търся проблема, приятелю
What about when it says IT'S TO HIGH?
Probably you have somewhere open circuit , most likely the clock spring is bad
@@crank3646 does the srs light automatically disappear or is a scan tool needed to clear it?
Thanks as always
Здравей братле, искам да те питам какъв софтуер използваш за сканиране и чистене на кодове?
Launch X431