Thanks for the video , massively appreciated. Couldnt have done it without you. For the people who struggle to break the plastic welds on the back of the handle ( 3 of them ) I drilled them out and that seemed to work well and wasnt too diffcult. The reppacement handle wasnt a perfect fit , but I just made sure everything was tight so lets see. Thanks again.
Thank yuo very much, I've solved this time consuming issue. However, I'm still in love with my 70's Alfasud, with cardboard panels and visible screws 🥲
Bonjour. Merci pour la vidéo. Pour ma part j'ai percé les fixations plastiques soudées de la poignée existante avec un forêt de 8. Attention à pas traverser le panneau. Ensuite dépose de la poignée en écartant le panneau de la poignée. Là il faut pas hesiter. Ensuite repose poignee et soudure plastique avec un clou chauffe au décapeur thermique. Ça tient nickel. Puis repose du panneau sur la porte dans le sens inverse à la pose. Merci pour ces vidéos !
Thanks You very much I do the job today and it was with your video otherwise I don't do it. The part to remove the piece is hard but possible. I resolve the plastic with a cheap iron.
Thanks for the vid mate done mine today! It’s a bit of a bitch to get the handle in and out the door card but perseverance payed off in the end... also I seen a few ppl saying to use cable ties for plastic welding the back with a soldering iron! Seems to have worked a treat 👍
I did it this morning, the video is very useful. I took the panel completely off, because the door handle is very hard to get off and in again. But job done 😉
Great video, onlybhad to watch it once in order to get an idea of what to do, thankyou 😀 don't suppose you've got one for the temperature sensor in the mirror have you 😅
Man you are a true HERO !!! needless to say that my door handle broke because of its poor quality of plastic. But I have one question. Is it the same way for the rear right handle door ? And another one question is which part of the plastic you melted and you have to heat the plastic and melt it ? can I just use any glue for the plastic ?
For the rear door i cannot say, but the system should be similar. I didn’t use any glue but the molten plastic from the spare handle itself. If you try some glue it comes down to try and error. Go for epoxy, if you can😉
Thanks for the video , massively appreciated. Couldnt have done it without you. For the people who struggle to break the plastic welds on the back of the handle ( 3 of them ) I drilled them out and that seemed to work well and wasnt too diffcult. The reppacement handle wasnt a perfect fit , but I just made sure everything was tight so lets see. Thanks again.
Thank yuo very much, I've solved this time consuming issue. However, I'm still in love with my 70's Alfasud, with cardboard panels and visible screws 🥲
Bonjour. Merci pour la vidéo. Pour ma part j'ai percé les fixations plastiques soudées de la poignée existante avec un forêt de 8. Attention à pas traverser le panneau. Ensuite dépose de la poignée en écartant le panneau de la poignée. Là il faut pas hesiter. Ensuite repose poignee et soudure plastique avec un clou chauffe au décapeur thermique. Ça tient nickel. Puis repose du panneau sur la porte dans le sens inverse à la pose. Merci pour ces vidéos !
Thanks You very much I do the job today and it was with your video otherwise I don't do it. The part to remove the piece is hard but possible. I resolve the plastic with a cheap iron.
Thanks for the vid mate done mine today! It’s a bit of a bitch to get the handle in and out the door card but perseverance payed off in the end... also I seen a few ppl saying to use cable ties for plastic welding the back with a soldering iron! Seems to have worked a treat 👍
Great idea. Saved me some time.
I did it this morning, the video is very useful. I took the panel completely off, because the door handle is very hard to get off and in again. But job done 😉
Nice, happy that it was useful. Have a safe Trip in your alfa
I just bought the silver part of the handle, can I just install that and keep the black part in?
thank you very very very much
Great video, onlybhad to watch it once in order to get an idea of what to do, thankyou 😀 don't suppose you've got one for the temperature sensor in the mirror have you 😅
Thanks. My door handle is broken too. Why they make it so cheap?
You don't have melt and resolder the plastic tabs. It screw keeps it firmly in place just fine.
Ty mate, good job.
Geniale Anleitung, vielen Dank !
Kein Ding😉
I did it for only 7€ here in morocco. But great video btw.
Hi, Do somebody know if it’s the same part for rear door please?
Man you are a true HERO !!! needless to say that my door handle broke because of its poor quality of plastic. But I have one question. Is it the same way for the rear right handle door ? And another one question is which part of the plastic you melted and you have to heat the plastic and melt it ? can I just use any glue for the plastic ?
For the rear door i cannot say, but the system should be similar. I didn’t use any glue but the molten plastic from the spare handle itself. If you try some glue it comes down to try and error. Go for epoxy, if you can😉
my rear door done same yesterday!! did you find the rear easy enough to do?any tips?
@@paulmaginnis7111 didn't touched the rear door yet. Sorry
@@paulmaginnis7111 did the rear work the same way as in the video? Mine just broke on the right side in the rear and I guess I‘ll have fix it too :(
Do you have video for back right door ? :///
Good video
unpossibe do do it without this video..................... gooooooood job !!!!!!!!!!!!!!!!!!!!!
This is it
My handle snapped right off today...!
Fai orima
Bruciala