OMG! You are amazing! and ##!!$$ awesome! I've been struggling with how to connect linear actuators to a toggle for a week now with no success! Thank you! Thank you! Thank you!
Thank you very for your great video. The same I was taught to the students and they are able to meneuver the DIY robot in learning and doing project 2023.
Can I use this DPDT on swapping power from 2 separate power source 2 by 12VBATTERY?When one get weak then I will switch to the other one with full charge.
Is it possible to get a corded drill to go backwards and forward on a timer, say two minutes forward two minutes backwards and repeat, it's for a project, and if it's not fairly easy, could it be possible on a battery drill thanks in anticipation.......
Thanks, this is exactly what I needed but the problem that I'm facing is that instead of a toggle switch, I need a push button switch so that when the vehicle collides with something such as a wall, it reverses the direction. So do you guys know if a push button DPDT is available in markets?
Hey dude, I bought this switch for my wiper motor to turn it from left to right rotation, but didnt realise it was a momentary switch. Would anything happen if i keep the switch closed and control it with my wiper switch?
Not to be negative, (no pun intended) but you didn't switch anything when you said you could switch it around. The same wires went to the same places! The two double wires went to the motor in both ways and the two single wires still went to the power supply. You might as well have said "head I win & tails you lose."
You made this so simple and easy for me. THANK YOU!!!!!!
This must be like the easiest way to connect it. Thumbs up dude
So much searching trying to find a smple breakdown since electronics are my nemesis. You'r video was exactly what I needed! Thanks!
Me too😊
Thank you for explaining that it doesn't matter which wires run to the battery, that it works either way. Best Regards.
Thanks, needed to fix a K'nex motor switch. Saved a lot of head scratching.
Great video. Thanks. Will the same wiring combination work for a AC motor?
Thanks, so simple to understand
Thanks bhuthi badhiys information sir is tarah ham air blower ko reverce conection karke vacume cleaner bana sakte hai ya nahi please guide me thanks
OMG! You are amazing! and ##!!$$ awesome! I've been struggling with how to connect linear actuators to a toggle for a week now with no success! Thank you! Thank you! Thank you!
damn this guy has done this a few times - thanks bro
Genius. one switch replaced an entire $100 circuit board.
Simple & easy to do. Thanks for the useful information.
Can any On-Off-On switch be wired to control Direction of One (motor), or are they a specific ‘type’ ?
Thank you for the content ! 👍🏼
Thank you for posting this.
Thank you very for your great video. The same I was taught to the students and they are able to meneuver the DIY robot in learning and doing project 2023.
Great video. My winch switch went bad helped out in a pinch
Big LIKE, very good and simple explication !!!👏👏👏
Thanks, how the connection will be using a controller? Like the TDPRO YK31C
Thank you for making it simple stupid not complicated at all people make it look complicated
Thanks man. I do not have the same switch as you but it is the same momentary. Eureka it works. 😃👍
Can I use this DPDT on swapping power from 2 separate power source 2 by 12VBATTERY?When one get weak then I will switch to the other one with full charge.
Is this the same set up if I wanted to wire 6 of these switches in one box?
Will just having a switch keep the speed consistent both ways
What type of switch is it please,....? Is it something like a double pole momentary push or something..?
Is it possible to get a corded drill to go backwards and forward on a timer, say two minutes forward two minutes backwards and repeat, it's for a project, and if it's not fairly easy, could it be possible on a battery drill thanks in anticipation.......
Thanks, this is exactly what I needed but the problem that I'm facing is that instead of a toggle switch, I need a push button switch so that when the vehicle collides with something such as a wall, it reverses the direction. So do you guys know if a push button DPDT is available in markets?
How much voltage is that battery supply
Can you do this for a BLDC motor? If so, can you please show a video on that keep up the great work love what you doing❤❤❤
Hey dude, I bought this switch for my wiper motor to turn it from left to right rotation, but didnt realise it was a momentary switch. Would anything happen if i keep the switch closed and control it with my wiper switch?
What is the green work sheet called
Thanks a lot my friend i really needed this!! Keep this good job!
can i use 2 switches for the same motor?
So im completely new so what happens if ou buy a 7 pin but want to do this. Will it still work?
Used on a small electric motor that drives a model railroad turn table . Excellent thanks !
I tried this with PC fans but it doesn’t work. But it does work on other household fans. Does any know the reason why PC fans won’t spin backwards?
Awesome, just what I was looking for. Thanks mate
can you provide a direct link to this switch? or better yet, a version that is NOT momentary?
YESSS! THANK YOU!!!!
Simple video but very helpful.. So awesome thanks for this
Best👏 I was looking for this for a week, if you could have added a diagram !!
that poor crying starving child locked up 23 hours a day in the background
My robotic arm will work now, thanks :)
Thanks man
Awesome thank you!
Do I need to have 12 volts for this or can I use any voltage
Late response - but this should work with any voltage (as long as u dont damage ur button lol)
Thanks a lot...
Didn't explain anything, thanks 👍
THANK YOU!!!
Thank you!
Thanks 👍
Not to be negative, (no pun intended) but you didn't switch anything when you said you could switch it around. The same wires went to the same places! The two double wires went to the motor in both ways and the two single wires still went to the power supply.
You might as well have said "head I win & tails you lose."
thanks alot
Thank u very clear
Awesome video, thank you. Could you do a reverse forward switch with a varying speed controller...?
👍
Hold it still so we can see Its impossible to stop the video on a clear point as well
Thanks
Thank u
Good job , may I have your email . Tks
$
Great information, but would have been better, if there was no crying baby in the background.....
Rude bro some people have babies, it's ok. .
That’s great thank you 🫡😊
Thanks 👍
Thanks