How to connect DC motor Reverse - Forward using micro switch
Вставка
- Опубліковано 6 чер 2022
- Many youngsters have asked about how to control a DC motor to spin Reverse - Forward So I have the intention to make this video as a guideline for the youngsters to try and develop.
- Наука та технологія
Thanks for your video, you help me more than you think.
Thank you too
For you support to me
is that an auto-fed soldering gun? what brand is that?
Can we make NC and when trigger then change direction
Thanks 👍 what battery you are using (volt) mah ? for such a small switch?
I use a 12v switch battery that can receive 220v power and our motor uses what voltage. We can also use a battery that is compatible with the motor.
Hi. Thanks for your tutorial. But what if both button were accidentally press? Or it were intended to press both button at once? Wouldn't it be a short circuit?
if were intended to press both button at once. the motor will stop
If use 6 Switch, haven't used it yet, but if you use 3 Positions 6 Pin Switch You need to use tree switches, can go to 6 places, but if you use a normal mini switch, is it possible? I have never tried it.
How to make motor run until hitting the another limit switch
Working ok. Good.
Nice project. Is it possible to add other switch in parallel to continuous rotation in forward or reverse direction?
is possible if use 3-way switch or Button sswitch
@@technologi-electronicthanks for your reply. Can you explain how to connect in parallel a button switch to continuous rotation please?
@@fabriziolongo83 Yws I will do it
@@fabriziolongo83 Or do this video but install the switch ua-cam.com/video/fOMiCK47DL4/v-deo.html
How to connect the motor with time relay and the switch limit for incubator?
Using Electric equipment or Electric equipment?
What type of switches are the called with the 3 connection points?
Micro switch
@@technologi-electronicCan you use switches with 2 connection points?
@@drmawac Can only use Micro Switch or have 3 points to connect
Sir my project need this 6 pair switches, (forward & reverse) , operate from 6 places , how can achieve it ??
Sir please reply
Are you use mini switch or two way switch
Fiz desse mesmo jeito, e n funcionou!
What's the cable name please ?
Use general cable
Hi,where get this switch can you pls mention name
Name is Micro switch
Thanks a lot
I tried motor running successfully.but I need to run the motor continuously
@@trainandhobbycoimbatore It you use AC motor suggested use Button switch and contactor
Can you provide me its diagram for connection please help me sir 😊
diagram or circuit in the clip
You can watch the circuit in the video
@technologi-electronic yes but it couldn't visible clearly and I am not understand the connection
@@Juggadiada ok
@@Juggadiada will share the circuit in @
Please Enter your @gmail
I love you bro thank you🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰😘😘😘😘😘😘😘😘😘😘😘😍😍😍😍😍😍😍😍😍🥰🥰😘😍😘😍🥰😍😘😍😘😍
okay thank you
Please provide no nc c points
I followed the circuit step by step yet it only turns on direction
ua-cam.com/users/shortslSiLNle2CeA?si=dRKx7YCDx4fz7QdO
How can we interchange the puss button to touch sensor switch?
The switch sensor has many models with two wires and three wires
@@technologi-electronic I found the solution
@@bishal.dangol good
@@technologi-electronic thank you
এগুলো কি সুইচ
why does it seems like that you are misguiding the viewers bcoz as I see the wiring connections at 1:53 are different than at the 2:23 plz dont spread such fake content over the community just to gain views many small aspiring minds are watching such kind of diy videos dont misguide them
Yes I connected the wrong circuit and I replaced the cable I forgot to mention. But many people will follow the circuit
@@technologi-electronic Then why don't you explain what you did. You actually changed the circuit 3 times. Videos like this should be banned because you are misleading people. Stop making videos with stupid music and explain to your viewers what you're doing and why you're doing it. That is if you're not a copycat and actually understand what you're doing.
@@gracelandproductions Look at the circuit shown
偷回兩次🧵 那麼不專業
YOU CAN'T MANAGE 3 WIRES??? ... KEEP CHANGING THE CONNESTIONS .. KEEP CHANGING KEYS POSITIONES??? UP & DOWN!! .. PATHETIC
did anyone notice he stopped the video and switched the wiring but neglected to point that out.
Yes, I changed the cable, but continued according to the circuit
I can't connect the wrong line, so I connect it again but I didn't take a picture, but I recommend to connect it according to the circuit
@@technologi-electronic thank you at first i thought it was me and i rewatched it 5 times just to make sure i wasn't crazy. it did work as planned when all was said and done, thanks again.
Another Fake content. Dont waste your time.