And a rocket surgeon like yourself couldn't figure out the rest of it? Do us a favor and grab your coloring book and helmet and just drink your Capri Suns. Let grown folk do their own things. You're the reason we have the safety features on the fuckin lighters now. Thanks and I'm sure I can speak for some other people when I say. Easy on the pressure you use cleaning the windows on the short bus there buddy. You might cut your tongue.
Hello, I purchased a lighter from amazon. There's only a screw at the bottom I don't know if it's for opening up the lighter or to increase the flame. There's a sigh of + and - .But the the valve of lighter looks like can be tighten. I am confused wether i should tighten the screw or valve nob. Can you help me? I don't wanna destroy my lighter.
why is it necessary to lower the flame adjuster all the way down on the fill valve? also if the lighter has a lever adjustment only or has both should the lever also be set on lowest or only the fill port?
This might be a dumb question but is there a difference between a butane gas cartridge and a butane fuel refill can? I have a butane gas cartridge, can I use it to refill my torch lighter?
I also have a hornet mini turbo windproof one! ! I need to know is it need special butane or eny butane on the market?? (C0z i don't know what blue fire needs)
1. Accidental ignition 2. For proper height adjustment because when filled the height tends to be higher and novices will have an easier time getting it to light correctly instead of thinking it doesn’t work. Lol. I do it especially if the ignition button is easily pressed once upside down to fill.
It does work. Y it keeps coming out n not refilling it full n i also empty it all out before puting it new to refilling it to see if i need it or not!! plz!..🙇🏻 do n a 🎥 about that y can i do to fully refilling it...
I have an old table top, following instructions , it immediately leaked on top during the fill !? What do I do now please ?! Do I need to tighten up the little screw holding the top and bottom parts together a little bit ?! Please let me know if you would
Hi this type of model of the Lighter Colibrì's Eclipse the flint to replace ? because after a short time that I bought it when I turn it on, the click is no longer heard
I have a maruman ic 502 that doesn’t light, it’s probably out of fuel and the battery is probably dead, but I can’t figure out how to fill it, there’s no fuel nozzle visible or anything. Any help would be appreciated!
@@r60d23 Under pressure, butane gas becomes a liquid in the refill bottle and of course liquids don't flow uphill. Of course they could design the bottle so the pressure would drive the butane up a straw, but if they did it that way, then the refill bottle would have to positioned right side up and it would cost a little extra to make it. It makes more sense to save a little money per bottle since either way only a certain bottle orientation will work (right side up or upside down depending on the design).
Ive done it every way i can find, on two different lighters, and both just sputter afterwards. If they flame at all its not long enough to even light a cig.
Hey guys! I have a tsubota pearl (pipe lighter) for like 5y now. When I refilled it, the lighter used to turned very cold. Now, it does not, the lighter stay warm and I have the feeling that the gaz isn't entering properly the tank. Is it an indication that I may have a gaz leak, or if am I just not putting enough gaz in it? The video says: hold 3 sec... so i don't know, anyone can help?
Add a type B refill valve that you screw in, or try refilling through the flame valve if it’s adjustable. They both work almost exactly the same but the second way is harder until you know exactly what you are doing from experience. You have to turn up the valve flame to open it up enough to get it in.
yeah i didnt know about the turn the adjuster down part :p still doesnt seem to be going in though. and before all that i found my lighter/torch thing only ignites upside down, so thats cool i guess
You need to take something to push in the fill nozel on bottom of lighter. Keeping your had a little bit away from end of pushing tool away from lighter. Hold fill nozel in and flip lighter up right hold inward until lighter is empty. Then try refilling
each time I try to refill any of my [cheap, basic garden-variety] lighters, it seems most of the butane coming out of the can is going straight outside the lighter :). I'm trying to place the can nozzle as perpendicular as possible to the bottom of the lighter, but most of the refill still goes outside the lighter, freezing my fingers :). What am I doing wrong? Should I be using some sort of an adapter vs. the bare metallic nozzle built into the can? Thanks
Some cheap lighters aren't refillable, but ones that are have different valve ends. It is important that you find matching atachment that goes on teh nozzle of refill can so it would match valve end. then you place can so that nozzle points downward and squeze both together. In order to fill lighter, both valves must be pressed to a certain depth (with a certain force) and they MUST be paralel/perpendicular ( if at angle, gas will escape). Only then will liquid butane flow and not spill.
@@TDDoooOOOooo All cheap lighters with a refill valve are refillable. That would be a defect, which is very rare. They are the easiest to fill as the valve is flat and no need to push it inside a hole. Advice: never use butane with a metal tip. You need a good seal and metal doesn’t work as well as a red plastic tip that seals with the gasket. Also use Newport butane or whip its to get quality adapters. You’ll never have a problem again as long as you purge first then apply pressure and release 3 times.
Does it not refill if you don't turn it all the way down (negative sign)? I've been trying to refill a lighter, I always forget to turn it down, I have yet to successfully refill it ☹️
In my experience, butane usually escapes during the filling process. This will absolutely freeze-burn you! Ask me how I know. I would recommend using gloves. Even latex/nitrile will save you from some potentially serious pain.
+Carin Wender the video forgot to mention the most important thing: while refilling, get the bottle up and the lighter down, because the butane is in liquide form, so it was to be poured into the lighter
You can't use this type of fuel in Zippo lighters. You need the liquid squirt fuel. They sell it at Walmart at the cigarette register. It's a yellow bottle.
I've tried this many times with different butane cans and different lighters. Every single time it never works. The butane just sprays back and feezes the fuck out of my hand.
I should've kept my receipt. I expected better performance for $10. After refilling it I gotta invert it just for it to fire up and even then it goes off after two or three seconds.
this is wrong you fill vertically not sideways , keep your gas canister upside down for a few minutes so that the propellant separating from the lower half liquid butane and only pushing in the liquid into the lighter tank and you don't pump hard ,you go slow to create a good seal and the butane will quietly and quickly flow like liquid so easily without cooling lighter or frosting it or sputtering , once it stops filling remove nozzle and then push back slowly to release the head space air and propellant from tank using a small tool like screwdriver or pen tip etc then proceed to fill as before and it will fill more butane liquid to perhaps 85% of capacity or possibly full tank , just repeat the steps to try and reach capacity if necessary
fnk never works, i wasted like 3 butane tanks because all the time i do it, no matter how many tutorials i watch, the thing just start spilling and to freeze the ligher, just not going in
I hear it's a good idea to put the lighter in the freezer and leave it there for a few hours before refilling. Probably has something to do with being able to put more butane in the lighter.
You risk cracking plastic lighter when butane fills frozen lighter, and you won't be able to fit much more gas. Other concern is if you fill frozen lighter 100% full, it could burst when it heats up to room temperature (or higher temp when you hold it in your hand). To avoid risk, just refill it when its empty. Usualy refill can lasts for few refills ( depending on volume).
@@TDDoooOOOooo I have an old Coleman refillable lighter. It's recommended by Coleman to stick the lighter in the freezer before refilling it. I've tried both without the freezer and with the freezer. The difference is noticeable. Without the freezer it fills up to about 70 percent full. With the freezer it fills up to about 90 percent full. There is no way to fill one of these up to 100 percent full. The pressure of the butane canister isn't high enough to do so. Have I cracked the plastic? Nope. Here's why. The butane canister gets freezing cold even with short bursts. So I can see why the manufacturer would recommend freezing the lighter first before refilling it.
Your hand covers everything, genius
And a rocket surgeon like yourself couldn't figure out the rest of it? Do us a favor and grab your coloring book and helmet and just drink your Capri Suns. Let grown folk do their own things. You're the reason we have the safety features on the fuckin lighters now. Thanks and I'm sure I can speak for some other people when I say. Easy on the pressure you use cleaning the windows on the short bus there buddy. You might cut your tongue.
your hand covers the most important part of the refill!
And what does that take from the video???????
@@daniellewallace2047 easy, visual aid of pumping action.
Hello, I purchased a lighter from amazon. There's only a screw at the bottom I don't know if it's for opening up the lighter or to increase the flame.
There's a sigh of + and - .But the the valve of lighter looks like can be tighten.
I am confused wether i should tighten the screw or valve nob.
Can you help me?
I don't wanna destroy my lighter.
@@johnme60 the valve should be circular and not a screw. The refill port should be in the middle of that valve.
@@tomgreen99200 Thanks for the answer.
Thank you so so so much!! I didn’t know you had to do 3 sec bursts you just saved me
This should be added as instructions on the butane canister!.
Raymond Wedler ikr !!
@@hadeelfadel3585 ,
Great video. You actually saved my lighter. :-D
Short, sweet and to the point!! Great video thank you!!
Bought the butane few months ago but no idea how to refill til i watch this.
Thank you so much
why is it necessary to lower the flame adjuster all the way down on the fill valve? also if the lighter has a lever adjustment only or has both should the lever also be set on lowest or only the fill port?
I'm using Ronson multi-fill on a wrench lighter, nothing seems to work, this helped a little, but not a lot.
Lighter might just be old.
Thanks. Your video helped me out!
This might be a dumb question but is there a difference between a butane gas cartridge and a butane fuel refill can? I have a butane gas cartridge, can I use it to refill my torch lighter?
I have the resources but my lighter has a cover for the flame adjuster and I can't get it down
Can you use syringes to inject na fluid going inside?
My Colibri 59000 has a small screw to the left just like yours does..whats it for ?
This is crazy.
This dude covering the actual part...😊
I also have a hornet mini turbo windproof one! ! I need to know is it need special butane or eny butane on the market?? (C0z i don't know what blue fire needs)
You're covering what you have to do pal lol
Curious: why turn the flame adjuster down?
Warning: the butane is very cold, do not burn your skin.
1. Accidental ignition
2. For proper height adjustment because when filled the height tends to be higher and novices will have an easier time getting it to light correctly instead of thinking it doesn’t work. Lol. I do it especially if the ignition button is easily pressed once upside down to fill.
It does work. Y it keeps coming out n not refilling it full n i also empty it all out before puting it new to refilling it to see if i need it or not!! plz!..🙇🏻 do n a 🎥 about that y can i do to fully refilling it...
Finally it worked 😩💜
I have an old table top, following instructions , it immediately leaked on top during the fill !? What do I do now please ?!
Do I need to tighten up the little screw holding the top and bottom parts together a little bit ?! Please let me know if you would
Hi this type of model of the Lighter Colibrì's Eclipse the flint to replace ? because after a short time that I bought it when I turn it on, the click is no longer heard
My butane fill cap has 5 nozzle sizes (1-5). What butane nozzle size will a Zippo butane insert take? thx
how do i refill a kent hd lighter because it have a windproof and a normal flame
I have a maruman ic 502 that doesn’t light, it’s probably out of fuel and the battery is probably dead, but I can’t figure out how to fill it, there’s no fuel nozzle visible or anything. Any help would be appreciated!
Critical step...the butane can must be upside down or it won't flow into the lighter.
@@r60d23 Under pressure, butane gas becomes a liquid in the refill bottle and of course liquids don't flow uphill. Of course they could design the bottle so the pressure would drive the butane up a straw, but if they did it that way, then the refill bottle would have to positioned right side up and it would cost a little extra to make it. It makes more sense to save a little money per bottle since either way only a certain bottle orientation will work (right side up or upside down depending on the design).
I now have to type with my feet
Ive done it every way i can find, on two different lighters, and both just sputter afterwards. If they flame at all its not long enough to even light a cig.
Do I need to turn the lighter flame diwn before bleeding it???
great explanation
Which gasfiller do you use?
why turn the flame adjustor down before filling??
Can you show which adapter you used?
Thanks, it exploded in my hand
Thanks, really helpful
thank you for the help
Great video
MVP right there
Hey guys! I have a tsubota pearl (pipe lighter) for like 5y now. When I refilled it, the lighter used to turned very cold. Now, it does not, the lighter stay warm and I have the feeling that the gaz isn't entering properly the tank.
Is it an indication that I may have a gaz leak, or if am I just not putting enough gaz in it?
The video says: hold 3 sec... so i don't know, anyone can help?
What if i dont have that part to put on butan?.but its "zippo"
Where can i order the little rubber O-ring that is around the refill nozzle because that's always ends up getting messed up and i cant refill anymore
O Ring assortments are available at hardware stores and good to have around. I'd just get a kit.
how do you know it is full ??
When adding gas, should I put plus or minus?
What is the use of left screw?
Great video =]
Will any kind of butane do?
Hello I was wondering if you had any knowledge on how to refill a 1970 Scripto butane lighter that does not have a fuel receptacle at the bottom?
Add a type B refill valve that you screw in, or try refilling through the flame valve if it’s adjustable. They both work almost exactly the same but the second way is harder until you know exactly what you are doing from experience. You have to turn up the valve flame to open it up enough to get it in.
yeah i didnt know about the turn the adjuster down part :p
still doesnt seem to be going in though.
and before all that i found my lighter/torch thing only ignites upside down, so thats cool i guess
You need to take something to push in the fill nozel on bottom of lighter. Keeping your had a little bit away from end of pushing tool away from lighter. Hold fill nozel in and flip lighter up right hold inward until lighter is empty. Then try refilling
each time I try to refill any of my [cheap, basic garden-variety] lighters, it seems most of the butane coming out of the can is going straight outside the lighter :). I'm trying to place the can nozzle as perpendicular as possible to the bottom of the lighter, but most of the refill still goes outside the lighter, freezing my fingers :). What am I doing wrong? Should I be using some sort of an adapter vs. the bare metallic nozzle built into the can? Thanks
a answer to this would be nice!
struggling with the same..
Some cheap lighters aren't refillable, but ones that are have different valve ends. It is important that you find matching atachment that goes on teh nozzle of refill can so it would match valve end. then you place can so that nozzle points downward and squeze both together. In order to fill lighter, both valves must be pressed to a certain depth (with a certain force) and they MUST be paralel/perpendicular ( if at angle, gas will escape). Only then will liquid butane flow and not spill.
@@TDDoooOOOooo All cheap lighters with a refill valve are refillable. That would be a defect, which is very rare. They are the easiest to fill as the valve is flat and no need to push it inside a hole. Advice: never use butane with a metal tip. You need a good seal and metal doesn’t work as well as a red plastic tip that seals with the gasket. Also use Newport butane or whip its to get quality adapters. You’ll never have a problem again as long as you purge first then apply pressure and release 3 times.
How do I know if it's full? And when I try filling it up it get's cold and gasses are coming out of it.
a little late but that means it's full. good luck
Because you are not using liquid butane
This happening to me too i put try to put it in then it comes out I try to use the lighter and it still don’t work
How do we know when it’s full
this will help on our dropshipping journey!
How can buy there fule?
Thank you
Can you use any butane?
Thanks for info
How to know when it’s low tho mine keeps turning
sir after refuling letr not ok after 39 mnt plx solve my reason
I have a lighter. that has gas too,
but is not burning on..
Plzz help me
Should it be held sideways or upside down when filling? It's hard to tell from this video.
Upside down. You'd want to fill it with liquid fraction of the butane, so it should go first.
Thanks I forgot to turn mine up again that's why it wasn't igniting....
Same my ass was so confused
thank u!
Does it not refill if you don't turn it all the way down (negative sign)? I've been trying to refill a lighter, I always forget to turn it down, I have yet to successfully refill it ☹️
No effect. Its for safety reasons. Use Newport butane adapters as they are quality.
What would you use to fill a 1930's Polo lighter?
Mine spits butane over the lighter when filling
The butane will start spraying back at you when full.
I have a lighter. that has gas too.
Is not burning on.
Plzz help me
@@SAGARKUMAR-bp3tg I have the same problem🤔🤔🤔
it’s empty and it’s spaying back at me
@@krabes8613 facts
can I use Coleman butabe fuel in my lighter or no
yes
That's a cool lighter but I feel like if I kept it in my pocket eventually id burn a hole through my jeans 😂
Thank you..
Yes we totally see what you were doing
How do I know when the lighter is full if it has no view window?
The guy said when it starts spraying back at you it's full hope this helps
In my experience, butane usually escapes during the filling process. This will absolutely freeze-burn you! Ask me how I know. I would recommend using gloves. Even latex/nitrile will save you from some potentially serious pain.
how do i know when its full?
She started spraying back at me, it too...wasn't pretty.
Cameraman belongs in Hollywood.
well now my lighter cant close and it lets gas out all the time.
Thanks 🙏🙏🙏
Great !
HOW do you know when its full though........
Got my answer in another video.
what is the answer?
Warzinak it makes a hissing sound
When the lighter is little bit heavier
Uh yeahh mine sprays everytime i try to refill ... i didnt really see how u matched it up
in the hole dumbass
LMAOOO
如何使用丁烷填充打火機
i did all the steps but the gas is still not gettin in there
+Carin Wender the video forgot to mention the most important thing: while refilling, get the bottle up and the lighter down, because the butane is in liquide form, so it was to be poured into the lighter
@@conker0007 This comment makes about the same sense as this video does. Bottle?
Bottle down lighter down lol.
nice
i’m trying to fill up my zippo lighter, ive done these steps and every time i try and light it it just lets out the gas again
You can't use this type of fuel in Zippo lighters. You need the liquid squirt fuel. They sell it at Walmart at the cigarette register. It's a yellow bottle.
Just burn the lighter untill its empty it's unnessecary to risk damage by pressing the gas valve to empty it !
Is the emptying necessary anyway?
Wiek van Venetië if the lighter isn't empty there is more prechure in the lighter which will make it harder for the Gas to flow in it.
wrong
mine just speews out and won't go in
same
same
same
I figured it out.... the butane i was using didn't fit my lighter refill valve so just get another brand of butane with a different tube to fill with
Reece Palmer a
I've tried this many times with different butane cans and different lighters. Every single time it never works. The butane just sprays back and feezes the fuck out of my hand.
Me too
My lighter has only fuel adjuster there is no fuel receptacel
I should've kept my receipt. I expected better performance for $10. After refilling it I gotta invert it just for it to fire up and even then it goes off after two or three seconds.
Thank you!
My lighter wouldn't fill but pressing on the stem to release the pressure solved it. Thank you.
but there was still some butane going into the tank at first right it just would not fill all the way correct?
this is wrong you fill vertically not sideways , keep your gas canister upside down for a few minutes so that the propellant separating from the lower half liquid butane and only pushing in the liquid into the lighter tank and you don't pump hard ,you go slow to create a good seal and the butane will quietly and quickly flow like liquid so easily without cooling lighter or frosting it or sputtering , once it stops filling remove nozzle and then push back slowly to release the head space air and propellant from tank using a small tool like screwdriver or pen tip etc then proceed to fill as before and it will fill more butane liquid to perhaps 85% of capacity or possibly full tank , just repeat the steps to try and reach capacity if necessary
its not working really it make me crazy
A star
fnk never works, i wasted like 3 butane tanks because all the time i do it, no matter how many tutorials i watch, the thing just start spilling and to freeze the ligher, just not going in
wrong adapter!
nice lighter
ty i though the lighter was broken
Fun fact legends are watching without lighter😂😂😂😂
HOW TO PUMP? I DON'T WANT ONLY C HANDS
I hear it's a good idea to put the lighter in the freezer and leave it there for a few hours before refilling. Probably has something to do with being able to put more butane in the lighter.
You risk cracking plastic lighter when butane fills frozen lighter, and you won't be able to fit much more gas. Other concern is if you fill frozen lighter 100% full, it could burst when it heats up to room temperature (or higher temp when you hold it in your hand). To avoid risk, just refill it when its empty. Usualy refill can lasts for few refills ( depending on volume).
@@TDDoooOOOooo I have an old Coleman refillable lighter. It's recommended by Coleman to stick the lighter in the freezer before refilling it. I've tried both without the freezer and with the freezer. The difference is noticeable. Without the freezer it fills up to about 70 percent full. With the freezer it fills up to about 90 percent full. There is no way to fill one of these up to 100 percent full. The pressure of the butane canister isn't high enough to do so. Have I cracked the plastic? Nope. Here's why. The butane canister gets freezing cold even with short bursts. So I can see why the manufacturer would recommend freezing the lighter first before refilling it.
I still cant do it, i imagine it bursting right in front of me 🤪