So often these custom slug loading companies don't seem to have a clue what they are doing... In this case it's apparent they absolutely know what they are doing. This is one of the most interesting, but practical slugs I have seen in some time. Keep up the good work Taoflederfolks.
The video is great. But the name of the round is confusing ...but I'm just a noob, so maybe it confuses just me? SLAP round made me think of a round like a 308 SLAP or an M903 SLAP.... where SLAP stands for "saboted light armor penetrator" And this round in the video has no sabot or does it? Could SLAP stand for something else?
No matter how many times i see it, every time you cut open the magazines i wait for an "oops that shouldn't be in there" as a dirty mag gets exposed. 😂
@@PostTenebrasLux being shot at isn't nothing if shooter misses Much worse getting hit As long as people are missing they can shoot all day long therefore being shot at isn't bad Getting hit is by far way worse then being shot at
That is one impressive round - short flight time and flat trajectory on short-mid ranges so it's fairly simple to shoot, very low penetration and immediate fragmentation upon imparting tissue-like material and outstanding accuracy makes for a really decent PHD round. Thank you, folks, for making this video and marry Christmas to you ^^
The flash and fire on the first slug to the plate was most likely caused by a couple of factors. 1: Composition of the Delrin likely had a larger amount of polyester which reacted with the friction and high heat from the impact on an aluminum target causing it to catch fire(over 500C). 2: Like you mentioned, composition of the aluminum alloy likely raised surface tension and increasing the friction which reacted with the heat generated by the slug. If you can send me a sample of the slug and/or plate, I can test it for composition and tell you which it was. Dissimilar materials and bonding to them is what I have done for almost 20 years. Website/business credentials available upon request.
Quick question since we have a materials expert here: There are some molecular bond effects that will cause visible light when they happen (breaking of the bonds etc.), an extreme example would be ripping tape causing enough x-rays to be generated to actually make an x-ray picture of a finger bone. Do you think something like that could also be contributing to the flashes we see, even when a plastic pellet hits a plastic jug?
For matters of state and local licensing we are unable to sell until after the first of the year 2018. But we will be doing Holiday drawings and giveaways for a Mossberg 88 pump action fully rifled shotgun, our PHD ammo, and more. Just go online to slapshotusa.com and sign up before Christmas day for a chance at a free gun or a chance to try our ammo yourself. As soon as the ink dries on our licensing, product sales will begin and winners will receive their prizes!
Jeff got to love the chrono face cover haha never sease to amaze me how genius you guys are excellwnt content also damn super entertaining plus dont forget tacticool science 😁😁😁😎😎😎
Still watching old videos ....they never get old...not the greatest quality/commentory/high budget...but thats the GREATEST QUALITY if it all...danny, jeff, and OG can always make me smile in some type of way in any video....RIP Danny, i have a good feeling your up there watching down on jeff and OG making sure they still use lil tony as well lmfao.....miss ya buddy, you were always fun to watch and listen to...good job on the channel Jeff...good job😊
Loved the "GOOOOOALLLLL" and the hockey goal air horn blast. You alls' sense of humor is one of the things that sets you apart from most other "gun channels" - well, that and being literate. Oops, did I say that out loud? :-)
Once again I can't praise SlapShot enough. They are a great local gun shop that works hard to fulfill customer's needs. I bought my Taurus G3 from them a couple of months ago and it is great. Being owned by a retired Portland LEO is great and they do give active and retired cops a discount. I really appreciate that. If you live in SW Washington state I encourage you to seek them out to meet the great folks there. Also check them out on the web. You can't go wrong.
I think the flash is coming from the speed of the projectile when hitting the metal. I seen the same flash before with extreme speeds on this channel but it was a plastic airsoft bb hitting aluminum plate.
Can you do a wax slug special video? You have a lot of targets now that haven't had the the wax slug treatment. A lot of your wax slug videos are pre Chronos so getting some good slow-moes would be cool. Thanks for the great vids.
Awesome video fellas‼️👍👍👍👍 The reason there was no Flash was because instead of hitting instead of hitting the slug to bear's metal you hit the piece of tape‼️🎯🎯🎯💯💯
I really enjoy the super thorough way you explore these rounds. I also love how clever you are using inexpensive targets to shoot at, yet which show a lot about the effectiveness of the rounds. This area looks to me a lot like the scenes I see when driving along Route 99 toward Bakersfield, or Fresno. Looks very CA Central Valley.
I had a random thought the other day. What if you put targets / objects inside of the gel blocks while making them? Like a steel plate in the middle of gel block or something Catch the fragments and such Or is that not possible
Wesley Oliver it is possible!!! Me and my bro have done it, mostly with figure toys and bottles of liquid to see how it reacts when shot, steel plate and wood would be sweet! I think we will try it, I hope tao sees our comments and tries it!
You guys should make a video where you go to the hardware store and find possible shotgun rounds with like a 10 dollar budget it would be super cool thanks(hardware store special)
Phillip B ... I like that suggestion. Would be great if they did video of shopping possible projectiles and let the viewers vote on what to try and pick the top three.
Everyone (including Danny) mentioned "show me your features" but not the fact that the slug stopped on a Glock ad page... lol I was born in Canada, where hockey pucks are used as teething rings when the kids are really getting them in... lol. (don't laugh, they work great!)
At 5:14 I saw an old American Survival Guide that I actually still have stuffed away in my attic. Wired seeing that and glad to see there is a future use for those magazines in my attic
Using the highway as a backstop in the distance is a very clever. One miss and a jump and some poor motorist is going to get a nice souvenir on his way to work or home.
@@taofledermaus - I shot plenty of those, but the rounds were as standard (boring) as Fck. I know enough about the irregularities of ballistics to realize that literally anything is fascinatingly possible in the world of guns. However, these guys regularly shoot there, and if any of the rounds we're talking about don't make it to there, so be it. The others, however, may just well do that.
Hey I hope you see this, my father is the kid running down the street saying the bus is coming he still gets about 18$ a month from it. That part was filmed in his home town called ligonier in Pennsylvania
That too, is impressive. These SlapShot slugs should be better for hunting, main reason being, the Moose or Elk,..( or whatever) won`t suffer from lead poising!!! Merry Christmas Jeff, Danny, Officer Greg Marine Nick et al ,..and all the best of continued Good Health in the New Year.
At that speed and weight along with that much rise at 50 yards I bealve 100 yard shots are possible. I also beleave would make a good deer slug. Lead free,hollow point and stable out of rifled barrels.
I was never notified!! That was awsome effect with the saw dust. Also sight over bore like on an AR would come into play with the 50 yard target. Because of the velocity and lack of weight you do not have the drop.
I keep catching myself watching all these old videos with Danny. Man I miss him, he was such a good guy.
Same here. Such a chill and kinda quiet dude but seems really genuine, and a crack shot with that Mossberg dadgonit!
Yep, cool, calm, quiet but an absolute tip top bloke ❤
Who doesn´t like it if someone shows its features?
Nice Slingshot Channel Reference. Jorg is a really nice Guy.
had to laugh at this moment :D
5:05 lol
Post Tenebras Lux let's just go for Mr. Sprave.
Hee klazy mulla flucka!
So often these custom slug loading companies don't seem to have a clue what they are doing... In this case it's apparent they absolutely know what they are doing. This is one of the most interesting, but practical slugs I have seen in some time. Keep up the good work Taoflederfolks.
Practical? How so? These are a junk gimmick. Garbage
@@sloanmagnum5009 Junk gimmick garbage? How so? These are practical slugs for HD.
@@sloanmagnum5009 ever been hit by a sluggish going 3000 fps? Might as well face down a tank shell.
The slow motion scenes are always awesome! Great video!
Thank you Jesse and Mike!
The video is great. But the name of the round is confusing ...but I'm just a noob, so maybe it confuses just me?
SLAP round made me think of a round like a 308 SLAP or an M903 SLAP....
where SLAP stands for "saboted light armor penetrator"
And this round in the video has no sabot or does it?
Could SLAP stand for something else?
Love that this guy knows Joerg, “let me show you its features haha“
What is the best☮️👍🎯
Mike's need to stay together.brother in arms👍🎯😆🤗
Cool
Very economicly
Jörg ‘Features haha’ Sprave
That first round looked just like an AP cannon shell hitting armor.. Beautiful!
I'm impressed those things stayed together. I expected them to shatter like 3-d printed stuff does. Also, I appreciate the scale on Danny's hand.
PhD? Must be the smartest slug ever made. Thing's got a Doctorate
Lol. Should be the advertising slogan. Nice.
Doctorate? fake or real ? ha...ha...ha....
I’ve yet to see someone outsmart slug.
No matter how many times i see it, every time you cut open the magazines i wait for an "oops that shouldn't be in there" as a dirty mag gets exposed. 😂
Yurr Next 😂
Yurr Next
Someone.........keeps taking them out, to go with their Taylor Swift collection! 🤐🤣. 🇺🇸😎
Danny AKA Triker Red shhhhhh, secrets. 😉
Dirty magazines and Tay Tay brought me here....I am disappoint :( But...cool shooting guys.
Why would you want to shoot family treasures?
Outstanding as always! 9mm weight projectile at .223 speeds.
9mm weight, .223 velocity, 12g dimensions and it’s made of plastic. Weird af but it works nicely.
Loads of Bacon yazmazzzzzzzzaaaaaaa@@@@@,,,,:::::::::::::.::::::::
Literally explained .243
Worst thing about getting shot with one of those is the shards of plastic inside you
@@PostTenebrasLux being shot at isn't nothing if shooter misses Much worse getting hit As long as people are missing they can shoot all day long therefore being shot at isn't bad Getting hit is by far way worse then being shot at
Next on TFM - shooting christmas food out of a smooth bore break action!
Merry Christmas to Jeff, Danny & OG (+ any guest shooters)
Pieces of old Fruitcake would be lethal for sure
ingles sin. barrera
I'd go for shooting a gallon can of cranberry sauce with a wax slug :D
B
Pretzel stick sabots
Merry Christmas and Happy New Year from Australia guys, hope everyone has a good one.
Thank you James!
That is one impressive round - short flight time and flat trajectory on short-mid ranges so it's fairly simple to shoot, very low penetration and immediate fragmentation upon imparting tissue-like material and outstanding accuracy makes for a really decent PHD round. Thank you, folks, for making this video and marry Christmas to you ^^
Merry Christmas to Jeff, Gregg, Danny and the whole taofledermaus team :)
ArtisanTony
Thanks Tony. Merry Christmas to you and your's! 🎁. 🇺🇸😎
Merry Christmas Tony!
TAOFLEDERMAUS "team" here lol Merry Christmas to you as well
Need a video of these hitting ballistic gel, what a round
There’s a video on the company website. I just saw it..
Great stuff as always. Not only what you do but your production values are right on with what you are doing.
The flash and fire on the first slug to the plate was most likely caused by a couple of factors. 1: Composition of the Delrin likely had a larger amount of polyester which reacted with the friction and high heat from the impact on an aluminum target causing it to catch fire(over 500C). 2: Like you mentioned, composition of the aluminum alloy likely raised surface tension and increasing the friction which reacted with the heat generated by the slug. If you can send me a sample of the slug and/or plate, I can test it for composition and tell you which it was. Dissimilar materials and bonding to them is what I have done for almost 20 years. Website/business credentials available upon request.
actually hitting the sticker may have put a layer of protection that prevented the spark.
Quick question since we have a materials expert here: There are some molecular bond effects that will cause visible light when they happen (breaking of the bonds etc.), an extreme example would be ripping tape causing enough x-rays to be generated to actually make an x-ray picture of a finger bone. Do you think something like that could also be contributing to the flashes we see, even when a plastic pellet hits a plastic jug?
Judee C. J
For matters of state and local licensing we are unable to sell until after the first of the year 2018. But we will be doing Holiday drawings and giveaways for a Mossberg 88 pump action fully rifled shotgun, our PHD ammo, and more. Just go online to slapshotusa.com and sign up before Christmas day for a chance at a free gun or a chance to try our ammo yourself. As soon as the ink dries on our licensing, product sales will begin and winners will receive their prizes!
Can I buy these in AZ
SlapShot USA damn, I'm a year late to that party- way to go youtube notifications.....
@eric duffy probably required in CA.
eric duffy why wouldnt you be able to
eric duffy yes you can
Good shooting by Danny on this one. Hope you guys have a merry Christmas. *:-)*
Early Christmas present, this video was. Merry Christmas to you Toaflaudermaus folks! Always a Pleasure to watch these.
Awesome. That was a very interesting video guys :) Cheers and have a good one!
The genius of ammunition ballistics. More speed, moar explosive! How’d they do it?!?! So complicated. Makes computer science look like child’s play.
Jeff got to love the chrono face cover haha never sease to amaze me how genius you guys are excellwnt content also damn super entertaining plus dont forget tacticool science 😁😁😁😎😎😎
Still watching old videos ....they never get old...not the greatest quality/commentory/high budget...but thats the GREATEST QUALITY if it all...danny, jeff, and OG can always make me smile in some type of way in any video....RIP Danny, i have a good feeling your up there watching down on jeff and OG making sure they still use lil tony as well lmfao.....miss ya buddy, you were always fun to watch and listen to...good job on the channel Jeff...good job😊
Tactical Santa?? Is Danny's Sleigh a MRAP??
You could probably win some bar patrons money with the question bet "Can a 12 ga. slug go 3K fps". :-)
Nah, I think Danny's sleigh would be a custom 6x6 Humvee.
Tactical Santa lol😂
Merry Christmas guys!
Danny is an amazing shooter. Merry Christmas to the whole Taofledermaus team!
Loved the "GOOOOOALLLLL" and the hockey goal air horn blast.
You alls' sense of humor is one of the things that sets you apart from most other "gun channels" - well, that and being literate.
Oops, did I say that out loud? :-)
Santa could use an updated look, Tactical Santa Danny nailed it.
Once again I can't praise SlapShot enough. They are a great local gun shop that works hard to fulfill customer's needs.
I bought my Taurus G3 from them a couple of months ago and it is great. Being owned by a retired Portland LEO is great and they do give active and retired cops a discount. I really appreciate that.
If you live in SW Washington state I encourage you to seek them out to meet the great folks there. Also check them out on the web. You can't go wrong.
Holy puck are those fast!
I think the flash is coming from the speed of the projectile when hitting the metal. I seen the same flash before with extreme speeds on this channel but it was a plastic airsoft bb hitting aluminum plate.
Wow. Absolutely amazing to say the least! We need more of these successful videos
Nice to see a company bringing something new to the table thats not just a gimmick....
Rest easy brother
I really enjoy your videos. Danny makes a great addition. He is my favorite sidekick.
Tactical Santa hat 😂😂
Danny was an amazing man
Holy crap you guys finally got a chronograph!
Merry Christmas guys! I always get excited when I see a new taofledermaus video in my feed, u guys are awesome! Great shooting dead eye Danny!
Can you do a wax slug special video? You have a lot of targets now that haven't had the the wax slug treatment. A lot of your wax slug videos are pre Chronos so getting some good slow-moes would be cool. Thanks for the great vids.
robmanueb2 I would agree with this comment!! Let's get a wax slug-fest!!
I third this
What you waiting on taufledermaus
Make them then send them
👍
@@thatguy746 What they said.
I'm very impressed with the projectile.
Light, hard and tough. Perfect balance.
Greetings from South Africa!!!
Merry Christmas TAOFLEDERMAUS and Danny! I really enjoy your videos and can't wait to see what 2018 brings for projectiles
Thank you! I hope will be around in 2018!
5 dislikes from hipsters who wanted to be seen listening to that old radio .
The disliked could've came because the ammunition was crap which it is
Victor w. true+ or that old rocking chair. lol
The synchronicity with the 'slap shot
was extraordinary.
I’m glad it’s Danny saying Ho Ho Ho. If it was OG, he’d cause a vice beat stampede.
Awesome sweatshirt at 10:20 - didn't know you all knew each other.
Thats a hell of slug friend, keep up the good work friend
Just scrolling through and saw your comment and said, "I'm not gonna let this pass me by." Whoop whoop.
Nice shoot'in there Santa Danny ! Also a Merry Christmas to Jeff , Officer Greg , Danny , and everyone at Taofledermaus !
cronos222
Thank you! And a Merry Christmas to you! 🎁. 🇺🇸😎
Now I wonder how fast the HDPE rounds I made were flying
I like the concept of a plastic slug
HAPPY NEW YEAR TAOFLEDERMAUS!!!
AND TO ALL TAOFLEDERFOLKS!!!
Oh, and the air horns made the video!!!
I guess I should stop working on my hockey puck chest plate.
DAMN YOU TAOFLEDERMAUS!
Awesome video fellas‼️👍👍👍👍
The reason there was no Flash was because instead of hitting instead of hitting the slug to bear's metal you hit the piece of tape‼️🎯🎯🎯💯💯
Good Joerg laugh there
AMAZING impacts!! Sawdust was very impressive but the wet magazine impact had to be replayed a few times!! Merry Christmas!!
Fascinating and fun, as always. I'm really glad I found your channel, guys!
I really enjoy the super thorough way you explore these rounds. I also love how clever you are using inexpensive targets to shoot at, yet which show a lot about the effectiveness of the rounds. This area looks to me a lot like the scenes I see when driving along Route 99 toward Bakersfield, or Fresno. Looks very CA Central Valley.
Chris Tune
Tulare area. 🇺🇸😎
You can see 99 about 3.5 miles in the background.
Thanks. I went through there a couple of times recently on journey from Los Angles to Fresno. Thanks again for the enjoyable videos.
Thanks. No wonder this looks so familiar. Once again, I certainly look forward to your videos. This is what I call FUN!
That powder looks like rifle powder though.
Great video keep them coming you do things on youtube I have never seen before
Merry Christmas and a happy new year
I had a random thought the other day. What if you put targets / objects inside of the gel blocks while making them? Like a steel plate in the middle of gel block or something
Catch the fragments and such
Or is that not possible
Wesley Oliver it is possible!!! Me and my bro have done it, mostly with figure toys and bottles of liquid to see how it reacts when shot, steel plate and wood would be sweet! I think we will try it, I hope tao sees our comments and tries it!
Andrew R dang that sounds cool. I hope to see it in super slo mo
Good shit on buying a Chrono! I am very interested in future velocity stats on different loads and weights. As always, thanks @Taofledermaus!
You guys should make a video where you go to the hardware store and find possible shotgun rounds with like a 10 dollar budget it would be super cool thanks(hardware store special)
Phillip B ... I like that suggestion. Would be great if they did video of shopping possible projectiles and let the viewers vote on what to try and pick the top three.
Everyone (including Danny) mentioned "show me your features" but not the fact that the slug stopped on a Glock ad page... lol
I was born in Canada, where hockey pucks are used as teething rings when the kids are really getting them in... lol. (don't laugh, they work great!)
*Santauflage!* 🎅
These guys look like they’re right in my backyard. Gotta start keeping an eye out to see if I run into these locally. Love the content.
Merry Christmas to the best shot, Danny.
20alphabet
Maybe not the best. There is always room for improvement! And, Merry Christmas to you! 🎁. 🇺🇸😎
At 5:14 I saw an old American Survival Guide that I actually still have stuffed away in my attic. Wired seeing that and glad to see there is a future use for those magazines in my attic
As I learned in another channel when a 500 mag was shot into body armor, “When the vest enters the chest, you get to rest. 6’ down.”
Damn that radio was probably worth more than the shotgun that murdered it. There’s a big market for Sears catalog stuff like that.
I heard they made about 20 of those radios so it's good.
Man...people say a mosin nagant is insane for home defense....this would shred!
Using the highway as a backstop in the distance is a very clever. One miss and a jump and some poor motorist is going to get a nice souvenir on his way to work or home.
3.5 miles away. I guess you've been playing too much Call of Duty
@@taofledermaus - I had to check out what "Call Of Duty" was. The last time I played video games was when "Pac Man" was still groovy! LOLOL
@@jeroendesterke9739 We KNOW you never shot a shotgun before if you think a plastic slug can travel over 6100 yards
@@taofledermaus - I shot plenty of those, but the rounds were as standard (boring) as Fck. I know enough about the irregularities of ballistics to realize that literally anything is fascinatingly possible in the world of guns.
However, these guys regularly shoot there, and if any of the rounds we're talking about don't make it to there, so be it. The others, however, may just well do that.
YOU GUYS ARE AWESOME ! I JUST LOVE IT , ESPECIALLY THE FUNNY JOKES !
thanks!
God do I miss Danny, you guys are still great but us old people hate change and loosing old friends. ✌️ And see you at the big firing line Danny.
Hey I hope you see this, my father is the kid running down the street saying the bus is coming he still gets about 18$ a month from it. That part was filmed in his home town called ligonier in Pennsylvania
very cool! I don't remember that part!
TAOFLEDERMAUS it happened right before they mooned the town as the bus drove by
I don't know what movie you're talking about but I live about 10 mins from there. Small world.
MrCrumb34 where at Latrobe
And the movie was slapshot
The other guy was no Deadeye Danny he was just a flash in the pan. This is in reference to the question on or around 10:30
happy xmas TF OG Danny and co :)
Awesome Video & a Great Slug for home defense! Thanks Much & Y'all Have A Very Merry Christmas!!!
MERRY CHRISTMAS GUYS
That was a great Puckin shot Danny.😊👍👍👍
That too, is impressive. These SlapShot slugs should be better for hunting, main reason being, the Moose or Elk,..( or whatever) won`t suffer from lead poising!!!
Merry Christmas Jeff, Danny, Officer Greg Marine Nick et al ,..and all the best of continued Good Health in the New Year.
They do have some heavier hunting slugs too that we'll test soon
I would be worried that these wouldn't have good enough penetration characteristics for humane hunting.
THEY WON'T GET LEAD POISING LOL..
Great show guys, thanks.
Shooting a clip of magazines.
P Glenrothes .....that's what the news reporter says
I am totally digging Keith's sweater on Danny.... Freaking sweet, need to get me one.
You guys are cool I'd love for a day on your range
Merry Christmas guys!
At that speed and weight along with that much rise at 50 yards I bealve 100 yard shots are possible. I also beleave would make a good deer slug. Lead free,hollow point and stable out of rifled barrels.
Yeah, makes me wonder too.
Great shooting Danny and always great to get notified of new vids.👍
10223220
Thanks! 🇺🇸😎
Danny is the best!
Julian wibrajo
😊. 🇺🇸😎
11:02 You can see the chockwave before the slug appears ! that's beautiful
Drooling... I must have I need LOL
Danny in a Keith Fenner shirt quoting Jörg Sprave... Love it :-D
Finally！PHD slug！
I was never notified!! That was awsome effect with the saw dust. Also sight over bore like on an AR would come into play with the 50 yard target. Because of the velocity and lack of weight you do not have the drop.
getter done !
lol Thanks David!
5@ Stopped in it's track... by a Viking masterpiece and an old trusty copy of S.o.F....awesome.
WOW 3000 FPS For a slug
Danny has good taste in sweaters. Keith Fenner is an incredibly informative machinist.
SAI Peregrinus
That for sure! 👍🏻. 🇺🇸😎
Keith Fenner hoodie @ 11:40!!!! :-D
Season greetings to all at Taofledermaus.Stay safe over the holiday season.