Great....For others with a 2016 Chevy Silverado, under the drivers side use the black box (4th from the left) where you connected your courtesy lights in the grey box. Find the yellow wire in the black box and use it to operate your running lights. Y our automatic light control will have to be turned off for the amber running lights to work though. Still looks GREAT!!!!!
You're installation process is CRAZY, running electrical wiring under the belly of the truck like that and then run against body components. Run your wiring on the inside and then down thru a grommet found or make your own hole. Wiring outside will short and break in Mud or Snow.
Pretty vague, don't run wires over metal edges. Cut a slit in your grommet and push the wires through it. Consult your wiring diagram to make sure you are tapping into the correct wires.
2008 F150 Passenger Blinker wire is White with light blue race stripe and Driver side is Drk. Green With White Stripe/ both sides have black with Light blue stripe for the puddle lights, you will need to test for 12 Volts on one of them, then you can use any solid black wire for ground. (Side Note) I had to remove the door covers and splice in to the wire at the connector and run my own wire down to the junction wires in the floor board due to multiple wires with same colors for some odd reason, I could not find the correct wire. The lights really do blink amber with the turn signals at the correct blinking rate, looks really cool. Just to much work then should be done to find the correct wires is my only conn but hey, in the end I got it and saved me the price of a pro install when I can do it myself.
Just installed mine. However, which wire do I tap into for the amber Running Lights on 2016 Chevy Silverado? Already tapped into the dome lights on the drivers side for the courtesy lights. Great Product!!!
I was thinking could we use a fuse tap wire? On the interior lights? I’d get two sets one for the step like video shows and another under the step for no shadow of step. I fear the one under the step my be to exposed to the elements and road..
Yes, maybe I was wrong calling it "effect". I'll reformulate the question: what's making the led strip behave like that? Is it because it's spliced to the dome lights and they have that behavior? Or is it because the led strip comes with an additional circuit that makes it fade in and out? Thanks!
I couldn’t find any info aswell, I just ran the “running lights” into my trailer turn signal harness, and for the courtesy light, I used 2 relays, one from the cabin lighting and the other from the bed lights, as when you unlock the truck via remote, it will engage the lights aswell
Why do these lights work fine just off battery power? Soon as engines running I loose marker lights on strip and the turn signal skips almost hyper flashes on the light strip. Truck is a 2019 F-250. Thanks
It is because of the canbus system I guess you have. There will be wrong resistance in the circuit and make the car think some bulb is broke even if it isn't.
Daniel is right. You will need to add these lights via relays, and or straight off of your battery terminals. Anything downstream from your trucks ECU is going to throw an internal code, resulting in your lights not working.
That is SO COOL! I WANNA GET THESE LIGHTS FOR MY 2013 TACOMA TRD 4X4! Do you the lifespan of these lights? Once they go out, is it easy to replace them? Thanks in advance! Thx.
Is there a way to wire them to have white with headlights and have the turning signal and how. Tried to use the courtesy for the white running light and it acts up with blinker
I added these to my 2021 Ford F-250. The courtesy light work great. The amber lights flicker when I turn on my running lights. What can I do to stop them from flickering?
Can you keep them wired the same way showed in the video and make some changes to make them be on with lights but also blink or is there a different model for those
How would you recommend to install these without access to a lift? Can I run the drivers side wire up through the engine compartment to the passenger side and then pass through the firewall into the truck?
I like the white courtesy light and the yellow for the blinker, but I don't like the yellow staying on while driving. Is there a way to wire it so the yellow won't stay on but will work with the blinker? Or is there another product that I should be looking at. It's for a 2021 white suburban and I don't think the constant yellow will look good on it.
@@ledglow I hooked the up to the parking light for side lights and turn signal for them to blink. I attached the ground to the chassis and they worked great but like I said once I started the engine they went nuts. I installed them on a 2018 f-150. I might turn them around and try wires to rear trailer plug.
So does this light comes on when the headlights are on? I'm trying to wire it to where it comes on when I press my unlock door button on my key fob and when I open the door. Not on while I'm driving
The lights coming on are dependent on what power source you connect them too. If you connect them to a headlight wire, then they will come on when the headlights are turned on. If you want them to come on when the door is opened/key fab pressed then connect them to an interior dome light wire. We usually recommend connecting to power via the fuse box.
Bit of an odd question but can this be used to just use the side marker? From the wiring set up I know I could tap into a headlight/tail light but I wonder if that alone would be enough voltage to turn on the led strip.
GAMINGWITHSKITTLES , just buy a ten dollar 12 volt simple light tester, to find hot wires. has an alligator ground clip. very simple to use, a 6 year old kid could use it. light on, 12 volt. light off, NO POWER
Will it work if wired only as a courtesy light? Or do both have to be wired in to work? I’d like to have these but only as a courtesy light don’t really want the running light.
We've tested this product for over a year on daily driven trucks and have yet to see any fall off. The kit also comes with brackets as an additional mounting option.
LED GLOW, I have had these on my truck for about 5 months, I opted for not using the screws, but did find using Clear rvt silicone gives it an extra Bond and also keeps a hundred percent Clarity and I just rub a light amount across the whole thing specially on the edge of this to keep it tight just my experience only cuz I had the end start peeling away. ( Witch I'm sure was my fault from the prep most fails are from a bad prep job) having said that I love mine. Courtesy lights look awesome in the winter ( CNY). Also I tied my Amber lights into my turn signal. Installation was as easy as shown on video. I would suggest doing another video that shows how to wire it in using an accessory relay for people that have a ground side vehicle's
SasNet Romania , not the red extream double sided 3-M tape, no way !!!!!!! I've had window rain vents on my truck for a decade with 3-M red double tape with NO ISSUES !!!!!!! Your WRONG
This will never last in a hot state like Arizona where it gets 120f outside probably 150f on metal. This is bullcrap. Only hard plastic and screws will work. I call bull on this
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Great....For others with a 2016 Chevy Silverado, under the drivers side use the black box (4th from the left) where you connected your courtesy lights in the grey box. Find the yellow wire in the black box and use it to operate your running lights. Y
our automatic light control will have to be turned off for the amber running lights to work though. Still looks GREAT!!!!!
Thanks for the guide I’d watched this video so many time but I couldn’t find the wires but after reading your comment help a lot thank you
You're installation process is CRAZY, running electrical wiring under the belly of the truck like that and then run against body components. Run your wiring on the inside and then down thru a grommet found or make your own hole. Wiring outside will short and break in Mud or Snow.
Well I must say LEDGLOW Made a great install video. F150LEDS Video Freaking S#+KS. Thank you LEDGLOW.
It could be like, courtesy lights and the amber light could be the turn signal.
Pretty vague, don't run wires over metal edges. Cut a slit in your grommet and push the wires through it. Consult your wiring diagram to make sure you are tapping into the correct wires.
Could these be used as chicken lights or sleeper lights for a semi? Can anyone make a video of that idea?
Yes, as long as you are putting them on a Freightliner, Volvo or International.
Wish these would just stay white. Then do amber switchback for turn signal.
2008 F150 Passenger Blinker wire is White with light blue race stripe and Driver side is Drk. Green With White Stripe/ both sides have black with Light blue stripe for the puddle lights, you will need to test for 12 Volts on one of them, then you can use any solid black wire for ground. (Side Note) I had to remove the door covers and splice in to the wire at the connector and run my own wire down to the junction wires in the floor board due to multiple wires with same colors for some odd reason, I could not find the correct wire. The lights really do blink amber with the turn signals at the correct blinking rate, looks really cool.
Just to much work then should be done to find the correct wires is my only conn but hey, in the end I got it and saved me the price of a pro install when I can do it myself.
Need help finding dome light wire color for a 2016 ram 1500.
Just installed mine. However, which wire do I tap into for the amber Running Lights on 2016 Chevy Silverado? Already tapped into the dome lights on the drivers side for the courtesy lights. Great Product!!!
You will need to locate a 12v headlight wire.
I was thinking could we use a fuse tap wire? On the interior lights? I’d get two sets one for the step like video shows and another under the step for no shadow of step. I fear the one under the step my be to exposed to the elements and road..
Where and which wires do I tap into on my 2017 GMC Sierra DENALI truck for these lights?? Please help
when will you have a product that will function as a turn & running amber light with the courtesy light function?
Soon!
@@ledglow That's not soon enough!
How did you manage to make that fade in / fade out effect when powering on and off the led strip.
It's not an effect. That's what the light does when you close the door.
Yes, maybe I was wrong calling it "effect".
I'll reformulate the question: what's making the led strip behave like that? Is it because it's spliced to the dome lights and they have that behavior? Or is it because the led strip comes with an additional circuit that makes it fade in and out?
Thanks!
Yes, the kit is wired to the dome light so it basically mimics the how that works.
@@Porroquio The fade in/out is from a grounding circuit that either rises the voltage to 12v or pulls the 12v back to 0v.
I need an installation video for a tacoma.
What wire is it on a 2018 F150 Supercab for the dome lights / interior lights?
Did you ever find out which wire it is? I have a 2018 also
I too would love to know the answer to this haha
Not sure how long these would stay on up north
I just ordered them and live in central MN, time will tell
What are the tools used in this video specifically to crimp and slicing tools
Is it a KlienTools Brand?
Any info on wiring this to a 2003 Ram as a courtesy light and turn signal? Can’t find info anywhere
I couldn’t find any info aswell, I just ran the “running lights” into my trailer turn signal harness, and for the courtesy light, I used 2 relays, one from the cabin lighting and the other from the bed lights, as when you unlock the truck via remote, it will engage the lights aswell
Why do these lights work fine just off battery power? Soon as engines running I loose marker lights on strip and the turn signal skips almost hyper flashes on the light strip. Truck is a 2019 F-250. Thanks
Please double check your connections.
Having the same.issue on a 2020 f550
It is because of the canbus system I guess you have. There will be wrong resistance in the circuit and make the car think some bulb is broke even if it isn't.
Daniel is right. You will need to add these lights via relays, and or straight off of your battery terminals. Anything downstream from your trucks ECU is going to throw an internal code, resulting in your lights not working.
That is SO COOL! I WANNA GET THESE LIGHTS FOR MY 2013 TACOMA TRD 4X4! Do you the lifespan of these lights? Once they go out, is it easy to replace them? Thanks in advance! Thx.
Each application is different but many LEDs have a rated life of up to 50,000 hours.
Where do I get a third generation 1500 ram wiring diagram for this installation and is there a plug and play option ?
Nope! Not cutting my factory wiring.Use a add a fuse setup. Clean,no splicing or cutting.
Is there a way to wire them to have white with headlights and have the turning signal and how. Tried to use the courtesy for the white running light and it acts up with blinker
Do the Ram 1500's have the same wiring setup in the passenger side of the cabin?
I added these to my 2021 Ford F-250. The courtesy light work great. The amber lights flicker when I turn on my running lights. What can I do to stop them from flickering?
Double check the wiring to. make sure nothing is loose and verify that you are connected to a 12-volt source.
Can you keep them wired the same way showed in the video and make some changes to make them be on with lights but also blink or is there a different model for those
Right now it is one or the other.
How would you recommend to install these without access to a lift? Can I run the drivers side wire up through the engine compartment to the passenger side and then pass through the firewall into the truck?
Yes, the use of the lift for this video was only to make installation easier. It is not mandatory to use a lift.
I like the white courtesy light and the yellow for the blinker, but I don't like the yellow staying on while driving. Is there a way to wire it so the yellow won't stay on but will work with the blinker? Or is there another product that I should be looking at. It's for a 2021 white suburban and I don't think the constant yellow will look good on it.
Connect the orange wires to your turn signal power wires instead of the headlight wire. Then they will light up orange when the turn signals are on.
I did that and when I started my engine up the lights went crazy. They worked fine till the engine starts. I’m confused
Double check that you connected them to 12-volt power wire.
@@ledglow I hooked the up to the parking light for side lights and turn signal for them to blink. I attached the ground to the chassis and they worked great but like I said once I started the engine they went nuts. I installed them on a 2018 f-150. I might turn them around and try wires to rear trailer plug.
Is the wiring the same for all vehicles, like a Toyota Tundra 2022
The way the lights need to be wired is the same for every vehicle but the exact wires you need to connect to on the vehicle itself might be different.
Can you make them blink with the blinker wires like driver side to driver side turn signal and passenger to passenger side turn signal
Yes, you just need to wire them that way.
How to connect this lights in a toyota tundra 2005
can you use amber light for both running lights and courtesy light?
This kit can only be installed one way or the other.
I dont see why not with some diodes and you should be good to go
So does this light comes on when the headlights are on? I'm trying to wire it to where it comes on when I press my unlock door button on my key fob and when I open the door. Not on while I'm driving
The lights coming on are dependent on what power source you connect them too. If you connect them to a headlight wire, then they will come on when the headlights are turned on. If you want them to come on when the door is opened/key fab pressed then connect them to an interior dome light wire. We usually recommend connecting to power via the fuse box.
Would it be possible to just run these to a trailer light plug and plug into the port at the rear of the truck?
As long as it is 12-volts, yes.
Bit of an odd question but can this be used to just use the side marker? From the wiring set up I know I could tap into a headlight/tail light but I wonder if that alone would be enough voltage to turn on the led strip.
Yes, technically you can connect them however you like.
Could i wire them to ONLY be yellow when turning? I want them to run as white like the headlights
Yes you can.
What colour wire for dome on a 2000 Nissan pathfinder anyone know would be a great help as I'm only getting a constant white on
Pink.
GAMINGWITHSKITTLES , just buy a ten dollar 12 volt simple light tester, to find hot wires. has an alligator ground clip. very simple to use, a 6 year old kid could use it.
light on, 12 volt.
light off, NO POWER
Do they hv red and white ones?
Or jst red?
Will it work if wired only as a courtesy light? Or do both have to be wired in to work?
I’d like to have these but only as a courtesy light don’t really want the running light.
Yes - you can simply use this kit as a courtesy light.
LEDGlow thanks!
Are these legal in UK? As I have some installed on my car
What color wires for a 2005 navigator
Were do i purchase a terminal connector?. Cant find them anywhere
Amazon, PepBoys, Autozone, Advanced Auto
Can i use them as just courtesy lights. Dont want amber marker lights at all
Yes, you can do one or the other.
What if I do this to my car...?
Although we feature this kit on trucks, it can also be used for cars.
then it will be installed on your car
Where do i put the inline fuse at
The inline fuse will come pre-attached. No need to move it.
the inline fuse should go inline
Can you hook it up to your turn signal lights?
Yes.
Why does my ground wire have a fuse attached?
When there is a short, the ground becomes the return path and can be damaged as well. If a fuse is there it will blow before there is any damage.
How can you connect them or make them work on a 2007 honda element?
We install them on a truck for the purpose of this video but these lights can be installed on any vehicle in the same way.
Can I use this kit to work with my turn signals instead of markers and a red for brake when pressed
Yes, you can use it to work with your turn signals however this kit does not light up red. Only white and amber.
Don’t think you could legally drive with red on the side of your vehicle.
@@ledglow how do i make the them turn into turn signals?
Does anyone know if these come on immediately when unlocked?
Depends on how you power the kit.
Ok what is that spade connector setup i cant find it anywhere
T tap
Would it work in a 1998 Dodge Ram 1500?
Yes.
Can I connect this to my signal light. So it will blink with it
Yes, but keep in mind that the light will only turn on when the turn signal is on.
@@ledglow is there an easy location to access the left and right blinkers wiring to use them as blinkers!
Adam Cessford the turn signal themselves. Ether front or back, mirrors if your car has. Tap in to the wires.
I do believe that you can connect it to a trailer harness, and operate them as trailer lights so they can be running lights, and then signals
Can it be installed on a tractor?
Yes, as long as you've got access to 12v power and a place to put them!
Is this legal in California?
Please confirm with your local police department.
How do I install this on a Toyota Tacoma
The same exact way
How do I hook up both running light and turn signal
At the moment you can only hook up one or the other.
You can connect them to your day running light and turn signal, it’s easier, and you don’t have to run your wires under the truck ,
Osy Castanon how exactly do you do this? Thanks in advance
1 for a g.mc
What gauge t taps needed to tap into wires?
The kit comes with the connectors you will need for installation.
@@ledglow my came with shitty butt connectors not even heat shrink ...and the screws aren't even self tap....🤦♂️🤦♂️
2019 F150, is there an easy way to attach the blinkers instead of running lamps?
To the headlights.
The turn signal it self.
3M adhesive without screw = will fall from rain and snow in maximum 1-2 month!!!
We've tested this product for over a year on daily driven trucks and have yet to see any fall off. The kit also comes with brackets as an additional mounting option.
LED GLOW, I have had these on my truck for about 5 months, I opted for not using the screws, but did find using Clear rvt silicone gives it an extra Bond and also keeps a hundred percent Clarity and I just rub a light amount across the whole thing specially on the edge of this to keep it tight just my experience only cuz I had the end start peeling away. ( Witch I'm sure was my fault from the prep most fails are from a bad prep job) having said that I love mine. Courtesy lights look awesome in the winter ( CNY). Also I tied my Amber lights into my turn signal. Installation was as easy as shown on video. I would suggest doing another video that shows how to wire it in using an accessory relay for people that have a ground side vehicle's
Thank you for your positive feedback! We're are glad that you are enjoying the lights.
3m holds just fine as long as you prep the surface properly no screws needed have lights on my truck 5 years no sign of falling off
SasNet Romania , not the red extream double sided 3-M tape, no way !!!!!!!
I've had window rain vents on my truck for a decade with 3-M red double tape with NO ISSUES !!!!!!!
Your WRONG
This will never last in a hot state like Arizona where it gets 120f outside probably 150f on metal. This is bullcrap. Only hard plastic and screws will work. I call bull on this
The kit comes with mounting brackets and screws.
What is the appropriate wire gauge to extend the led wires if they're not long enough?
We usually recommend 30.