@@RaybritoPCServices On your Motionviewer, at Monitor section, the Ethernet/IP(CIP) Exclusive Owner is on. I am using explicit message to control the Kinetix 300. however, on my motionview, the exclusive owner never turns on like yours. In addition, did you use Allen Bradley plc?
@@yuanzhou3446 what rev is your firmware?, and yes I'm using AB PLC, you need to add your drive to your PLC and set it up, adding it to the ethernet devices on your plc code
@@RaybritoPCServices My firmware is 3.72, and I am using Omron PLC, it is different to set. Ok, Omron PLC cannot turn exclusive mode on, but it can still drive the motor. Thank you for your answer.
There is no software to download. This software is built in to the Kinetix 300 Drive and is accessed by connecting a computer to the EtherNet port and opening up a Java based web browser. Kinetix 300 drives are configured by using MotionView OnBoard software, a web-based configuration tool contained within the drive itself. To access the MotionView OnBoard software, the Kinetix 300 drive and your personal computer must be configured to operate on the same EtherNet network. The IP addresses of the Kinetix 300 drive, the personal computer, or both drive and personal computer may require configuring to enable EtherNet communication between the two devices. Consult the Kinetix 300 user manual for information on how to configure the drives IP address setting. See more information in Simple Motion Control via EtherNet/IP with Kinetix 300 Drives Connected Components Building Block publication cc-qs018
How to reboot the drive.. you are having notification to rebbot the servo drive.. how to do that?
Remove power to it...
@@RaybritoPCServices ok
How did you enable exclusive owner mode on Kinetix 300?
Sorry for my delayed response, can you elaborate? what you mean exclusive owner?
@@RaybritoPCServices On your Motionviewer, at Monitor section, the Ethernet/IP(CIP) Exclusive Owner is on. I am using explicit message to control the Kinetix 300. however, on my motionview, the exclusive owner never turns on like yours. In addition, did you use Allen Bradley plc?
@@yuanzhou3446 what rev is your firmware?, and yes I'm using AB PLC, you need to add your drive to your PLC and set it up, adding it to the ethernet devices on your plc code
@@RaybritoPCServices My firmware is 3.72, and I am using Omron PLC, it is different to set. Ok, Omron PLC cannot turn exclusive mode on, but it can still drive the motor. Thank you for your answer.
Do you have the link for download motion view onboard? Please
There is no software to download. This software is built in to the Kinetix 300 Drive and is accessed by connecting a computer to the EtherNet port and opening up a Java based web browser.
Kinetix 300 drives are configured by using MotionView OnBoard software, a web-based configuration tool contained within the drive itself.
To access the MotionView OnBoard software, the Kinetix 300 drive and your personal computer must be configured to operate on the same EtherNet network. The IP addresses of the Kinetix 300 drive, the personal computer, or both drive and personal computer may require configuring to enable EtherNet communication between the two devices. Consult the Kinetix 300 user manual for information on how to
configure the drives IP address setting.
See more information in Simple Motion Control via EtherNet/IP with Kinetix 300 Drives Connected Components Building Block publication cc-qs018
Solo conectate usando la IP del drive, no necesitas ningun programa...
@@RaybritoPCServices cuál es la dirección IP del drive kinetix por de fault o como puedo saberla?
@@cncsolution_Bajio puedes usar DHCP para obtenerla, la voy a buscar y la publicaré.....
@@cncsolution_Bajio As shipped from the factory the default IP is 192.168.124.120
+Raybrito PC Services
how to enable drive kinetix 300. please help me.. my drive kinetix is Disable. Thanks
disculpa, para realizar un back up, solo es save configuration, para que es el print.?