Thumpstar Workshop - "How to Adjust Semi Clutch"
Вставка
- Опубліковано 10 вер 2024
- Thumpstar Workshop
Models:
TS-K (Kids)
50cc
110cc
TS-B (Basic)
70cc
110cc
125cc
TS-X (All-Around)
125cc SW
140cc BW
189cc
230cc
TS-R (Racing)
180cc
Facebook - www.facebook.c...
Instagram - / genuinethumpstar
Website:
AU - www.thumpstar....
NZ - www.thumpstar....
US - tboltusa.com/s...
PH - thumpstar.ph/
___________________________________________________
Song - Hinkik & A Himitsu
Link - • Hinkik & A Himitsu - R...
Hinkik - / @hinkik
A Himitsu - / @ahimitsu
You should use an open wrench not a socket when doing that so I that you can have the screw driver in and not lose the adjustment by tightening the nut
Hi there thanks. I have a 125cc semi auto. The issue is prior to the bike being on I find it hard to get into neutral once i do find neutral it's good the bike moves freely forward. If i movie it up 1 gear then try and go back down back to neutreal I cant seem to find neutreal i sometimes have to play around going down up down till the bike moves freely forward. this is all while the bike is off. Will this clutch adjustment be the solution thanks
Hey i know its been 6 years but what oil do or did you use in the bike and how much. Havent found anything to mine thanks @Thumpstar
What if when I put mine in gear it goes in every gear but is slipping when on the throttle like the more throttle I give it the more it won’t catch that gear?
Thanks for the info. Much appreciated.
Thankyou so much. Great help.
How would I tell of my clutch needs changing?...I have just bought a 50cc meerkat quad 4 stroke for my son. It's 4 speed semi auto but doesn't seem much quicker than his old 2 stroke 50cc? Runs quite lumpy when accelerating
My semi auto 110cc quad jumps forward when engaging gear could this adjustment work to stop it doin that and go into gear smoothly cheers
A video showing you HOW NOT TO ADJUST THESE CLUTCHES🤣🤣🤣
Hi, thanks for the great tip. I wonder, I lost the adjuster part. Do you know where I can buy it? Worldwide should be ok. I only need that little part.. I lost it ;(
I have a 125 that doesn't have a clutch. When shifted in gear the bike wants to go without giving it gas and shifts really hard. Any info on how to stop it?
The reason the bike goes without You giving it gas is the idle is set to high, you can adjust the semi automatic clutch by removing the two screws on the right hand side for the cover, then use a socket to loosen the lock nut, then adjust it as recommended if nothing works change engine oil/check
What if your adjustment bolt is stripped?
What is slipping clutch in motorcycle engine?
Just play around with it ummmm yeah just play around with it ummm
Yeah experiment until you get it right
Good info thank you
can you do semi automatic to automatic clutch? thank you
He is doing a semi auto
What specs if the clutch slip at high rpm
@bhoi abasola i just replaced the clutch plates 4000km ago i don't know what the problème ?
Mine does the same thing at high rpm under load. I cant figure it out
I got oil leaking from the bolt ??
Because that's where the oil reservoir is
your intro is so damn loud my ears hurt
You didnt even give an actual test
Cheers muka
My cart takes some time to get going. I've adjusted the clutch in many ways and the brakes are not hanging. It rolls in neutral very well. The best I can get it still has no power. It starts slowly and picks up steam, but when starting up any sort of hill, it gets louder but doesn't actually move faster (if at all). It's like the gears are just spinning and not hooking up. The longer you ride it, the hotter it gets and the worse it gets. The kicker is that it works much better in reverse. It will actually go, but terrible in forward.
Did you solve your problem? I have the same trouble...
The dealer told me the clutch is bad. Brand new clutch! I bought the stuff on Amazon and tore it all down. Now need to put it back together.
Well? Did it work?
@@drhoward100 2 years later and it still sits in the barn. Need to get time to do the work.
That's your clutch it's worn out