Wonderful design and plastic container for sawdust ( no one has seen such a thought) and simplicity of the originality of the parallel stop and that the wood-resistance plate applied ! Thank you very much, I will focus so much, from a dozen viewed videos, it is the best! 5+++*
That's an awesome build 👏. I really like the plastic container underneath. Never thought of that. That's brilliant. Table saws throw some much wood around I'm constantly running my vacuum. Thanks so much!!!
your video is excellent, it does inspire me to build something similar with my own little extra touch! what are the dimensions used for this particular table saw?
muy buena sierra de mesa pero deberías corregir algunas conductas por seguridad. por ejemplo en el minuto 11:49 moviste la guía paralela con la sierra encendida y luego a la madera que cortaste le hiciste presión de izquierda a derecha a la altura de la sierra pero esa presión se debe hacer a una altura anterior a la sierra. de todas formas muy buen contenido.
Всё очень замечательно и сделано аккуратно Но пиле нужен воздух чтобы дышать , для охлаждения Сомневаюсь что она долго проработает в режиме работы в том облаке стружки которое создаёт этот колпак
Как минимум, я бы вывел тыловой воздушный канал для забора воздуха и охлаждения двигателя отдельно из этого пластикого бокса. А пылесос пусть ловит и сосет стружку из под диска.
your idea is very good. I made a table saw fence 60 cm long and it works perfectly. In all constructions we always have a problem with the verticality and parallelism of the wood. The only problem I had was the non-verticality of the 2 parallel woods 60 cm long with the table. I solved it by putting wood wedges between the parallel woods and the bolts I screwed.
Hola, la maquina se queda activada permanente el gatillo con una amarra, luego de hace una instalación con un corta corriente directo a la energía. Todo esto con la máquina desconectada. Saludos
@@markdavisson3518 For a few cuts you're right; but when you have to do a lot of them the motor tends to be very hot, I've saw electric breakers down because of this.
And to top it off he kept pressure on the side of the work piece behind the blade when he was using it to cut. Never use a feather board or put any kind of pressure sideways except in front of the blade.
Идея так себе, ничего хорошего. Сделать эту плашку идеально ровной не получится. Там стоят три проставки которые должны быть идеально ровными, с идеальными углами, что в принципе не возможно. Когда автор стягивает ДСП конферматами, последняя неизбежно прогнется, будет ложбина и все будующие детали будут неизбежно кривые.
I salute these "don't do" videos, and if you do it anyway, make a closed and sealed room with sawdust and spinning metal inside; I sure hope your insurance company will pay if the workshop goes down in flames ... At least, DON'T tell them "I just followed the instructions in this video" ......!!!
![Make your own table saw fence [DIY]](http://i.ytimg.com/vi/QIMV994CgYg/mqdefault.jpg)
Wonderful design and plastic container for sawdust ( no one has seen such a thought) and simplicity of the originality of the parallel stop and that the wood-resistance plate applied ! Thank you very much, I will focus so much, from a dozen viewed videos, it is the best! 5+++*
*فكره رائعه ياعزيزي تستحق المليون مشاهده تحياتي من مصر*
That's an awesome build 👏. I really like the plastic container underneath. Never thought of that. That's brilliant. Table saws throw some much wood around I'm constantly running my vacuum. Thanks so much!!!
Yeah...but how cut 45degree?
Show. Parabéns 👏 muito pratico
Good idea my brother
Rapaz Ficou muito bem feito,nota ,,10 pra vc 👏👏👏👏👏👏👏👏👏
Nice jobs i like idia
Nice.... creative 👍🙏
Progetto fantastico
Mantap channel ini.!,
Tutorial nya cukup mudah dipahami♥️♥️
Pokoknya 👍👍👍
Salam Bang dari indonesia🇮🇩
Как любительский вариант - отлично .
excelenta trabajo paso a paso te felicito mucho mi hermano
Sacaste aplausos
Felicidades
👏👏👏👏👏👏
Very nice and versatile 👍
Top muito bom
verry good fence, the idea inlett ruler is top. only the table legs are instable.
but in all verry good job.
greetings from germany👍🏻
Kreatif sekali,
Мне понравилось надо себе заделать!
good work bro God bless ❤️
ХОРОШАЯ РАБОТА.СПАСИБО,ЗДОРОВЬЯ ВАМ.
very good idea!
Nice
Muy buen trabajo, solo falta lo más importante, la protección del disco.
super bon travail bravo mille félicitation amar hadji algérien Algérie
Excellent work. I especially like the duct collection bucket.
Yaa great video
That's what I like, simple and fast, and it seems to work. 👍
How do you adjust saw blade hight?
Good job bossku selam from.indonesia channel.🙏🙏🇲🇨🇲🇨🇲🇨
Mantaaap mister
very nice job.
Good my brother 💖💖💖💖👌👌👌🇮🇳🇮🇳🇮🇳
Muito legal.
Parabéns 🎉🎈
Abraços do Brasil !!
Excelente trabajo y la guía excelente
Estoy convencido que tienen mucho que aportar para beneficios de los que no tenemos una buena escuela.abrazo
Good job though I would not call it a toggle fence. Gives a couple ideas though when I build a fence.
Cool thanks
Show de bola
good
Классно
Nice work sir please keep it up
excelente trabajo...que material utilizaste? saludos
Wow Good Job ....i Like. Have a PDF of this project .... Please I need
너무 멋져요
😊
이야 기가막히게 만드셨네요
Love it! Awesome 👍👍👍
Good^^*
Dear Sir
Good Job
What about depth and angle? It's very necessary, especially depth!
Good job bro
Recommended video
▶️DIY │house |Mini korean hanok thatched house：ua-cam.com/video/-1Xp8LNIBVI/v-deo.html
▶️DIY │Jigsaw Table：ua-cam.com/video/g8zZLzGqOio/v-deo.html
▶️DIY │ Homemade Dowel Maker ：ua-cam.com/video/dhgKdYAgXGk/v-deo.html
▶️DIY │Homemade Track Saw：ua-cam.com/video/n_QDKD850SQ/v-deo.html
▶️DIY │Simple Table Saw Jig ：ua-cam.com/video/mouPHfBLN-I/v-deo.html
เพ
Nice Video
Mantappp, bg
👏👏👏
Like this friend 😍👍👍
Отличная идея..УБДН стоит в 5 раз дороже чем циркулярная пила.. стоит задуматься
So how do you adjust the saw with the container surrounding it?
Получилось отлично!!! Но я заметил в конце ролика не параллельное хождение упора относительно пилы🤔, может показалось)))
Я тоже заметил
Не показалось.
Здесь нет никаких доводок и настроек чтобы выставить параллельность и перпендикулярность.
Excelent
your video is excellent, it does inspire me to build something similar with my own little extra touch! what are the dimensions used for this particular table saw?
Vc faz pra vender?
Молодец!
muy buena sierra de mesa pero deberías corregir algunas conductas por seguridad. por ejemplo en el minuto 11:49 moviste la guía paralela con la sierra encendida y luego a la madera que cortaste le hiciste presión de izquierda a derecha a la altura de la sierra pero esa presión se debe hacer a una altura anterior a la sierra. de todas formas muy buen contenido.
too long but excellent work
Всё очень замечательно и сделано аккуратно Но пиле нужен воздух чтобы дышать , для охлаждения Сомневаюсь что она долго проработает в режиме работы в том облаке стружки которое создаёт этот колпак
Как минимум, я бы вывел тыловой воздушный канал для забора воздуха и охлаждения двигателя отдельно из этого пластикого бокса. А пылесос пусть ловит и сосет стружку из под диска.
Scusa.Ma Il Pulsante Per Avviare La Lama Ce l'hai Sotto...Non capisco Come fai ad Accenderla.
Like👍
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Tools kitne inch ka hai
your idea is very good. I made a table saw fence 60 cm long and it works perfectly. In all constructions we always have a problem with the verticality and parallelism of the wood. The only problem I had was the non-verticality of the 2 parallel woods 60 cm long with the table. I solved it by putting wood wedges between the parallel woods and the bolts I screwed.
Como enciende la maquina si esta dentro del contenedor plástico?
Hola, la maquina se queda activada permanente el gatillo con una amarra, luego de hace una instalación con un corta corriente directo a la energía. Todo esto con la máquina desconectada.
Saludos
alat2 nya yg di pengen
Ciao è possibile avere il disegno con le misure ? thanks .... Happy new year
muinto fixee
You should make the dust hole lower for all the dust control
👍
Il peso del motore fa inclinare la lama che non rimane più ortogonale al piano
While using the saw, heat will trap, no airflow because of the container, and your amateur will burn.
The airflow from the shop vac will be sufficient to cool the motor.
@@markdavisson3518 For a few cuts you're right; but when you have to do a lot of them the motor tends to be very hot, I've saw electric breakers down because of this.
Existe sobrecalentamiento.
Ya lo había hecho en un día para un trabajo en domicilio.
No funciona
중간에 사용하신 공구 이름이 무언가요??
제작 부탁도 가능한가요?
With all the effort in making this diy table saw, i think you're better off just buying a table saw.
Cada persona que se digne de ser bueno en algo, debería de ser capaz de construir sus propias herramientas.
Don’t think so cheap table saws are nowhere near as good as doing this 👌🏼
After watching this clip I’m going straight to Home Depot the buy a table saw instead.
Ok
Se vc fizer pra vender me responde aí ok
No !!! No !!! Where is the riving knife !!! Is not safe , nooooooooo !!!!!!!!!
Yes,that whats keepin me from building one.I probably will just buy one from the store.im very picky with safety
And to top it off he kept pressure on the side of the work piece behind the blade when he was using it to cut. Never use a feather board or put any kind of pressure sideways except in front of the blade.
ปากช่อง 10 Hitachi ด้วยนะครับ
Первое- где лифт?. Второе- если крепить таким способом не будет строгого угла. Третье- приполок слабый не паралельный
Why do you use mitter saw for table saw? Why don't just buy the table saw? it's has the same price
No it’s not no where near the same price
Идея так себе, ничего хорошего. Сделать эту плашку идеально ровной не получится. Там стоят три проставки которые должны быть идеально ровными, с идеальными углами, что в принципе не возможно. Когда автор стягивает ДСП конферматами, последняя неизбежно прогнется, будет ложбина и все будующие детали будут неизбежно кривые.
Good job on the fence, but this video should be 3 minutes long.
Vídeo muito longo. Pouca precisão nas medidas e na confecção do mecanismo de corte.
Aap log lambai chaudai uchai I Sahi nahin batate badhiya ji
Пособие по закручиванию шурупов!?
Здравствуйте! Увыжаемый, вы говорите, что поделитесь бесплатнго! Оказывается, что нужно платить! Зачем эта лож?
조기대가 아니라 지그
Audio music is a distraction! Hope you don’t have any verbalization ? Will be viewing in mute mode.
I salute these "don't do" videos, and if you do it anyway, make a closed and sealed room with sawdust and spinning metal inside; I sure hope your insurance company will pay if the workshop goes down in flames ...
At least, DON'T tell them "I just followed the instructions in this video" ......!!!
The music needs to be shot.
Edmilson Dan dás de, aqui no,fiho
🥺🥺