Z1 modification xt225

Поділитися
Вставка
  • Опубліковано 26 січ 2025

КОМЕНТАРІ • 24

  • @The1GWP
    @The1GWP 11 років тому +4

    great vid. very useful information and well executed

  • @ngzcaz
    @ngzcaz 4 роки тому +1

    There's really not that much difference but it's an experiment... so good for you. I might suggest taking off the muffler after drilling or before for that matter and shaking out all that loose debris..

  • @brandonslezak6268
    @brandonslezak6268 9 років тому +2

    Do you get any more power or is it just louder?

  • @ALWAYSBUILTNEVERBOUGHT
    @ALWAYSBUILTNEVERBOUGHT 11 років тому +2

    Have you rejetted your xt?

  • @Jhovan33
    @Jhovan33 11 років тому

    Sounds like your idle maybe a bit high. Looks like you didn't have any trouble at all! Two thumbs up! American_Greenz

  • @JoshuaJHerald
    @JoshuaJHerald  11 років тому

    Bike was cold. If i lower this anymore, once its warm, It dies at lights and stops. I need to clean the carb and adjust the valves.

  • @rajgill7576
    @rajgill7576 10 років тому

    Do you know if this will work on an xt 250? I've got an old one from 84

  • @JoshuaJHerald
    @JoshuaJHerald  11 років тому +3

    If you remove the spark arrestor you may wear out the exhaust valves faster due to no back pressure.
    No I have not jetted it

    • @charlespratt8663
      @charlespratt8663 4 роки тому +2

      If you run too lean you can burn the exhaust valve but that has nothing to do with back pressure. Install a 130 main get. Thats what they used to come with from the factory.

  • @tedhyden4299
    @tedhyden4299 6 років тому +1

    Did you lose any low in torque ?

  • @Smittyschannel
    @Smittyschannel 8 років тому

    that's a BIG hole- we only drilled a 3/4 hole in ours

    • @gregs3032
      @gregs3032 4 роки тому

      me too, i didn't want it that noisy

    • @travislakin
      @travislakin 3 місяці тому

      ​@gregs3032 what size is he using?

    • @Smittyschannel
      @Smittyschannel 3 місяці тому

      @@travislakin that looks like 1 & 1/4 inch (1.25)

    • @Smittyschannel
      @Smittyschannel 3 місяці тому

      He's going to need to rejet that carb or else it'll start running poopy & can damage the valves with that much of a difference in backpressure

  • @torkrench
    @torkrench 5 років тому

    Run stronger?

    • @zadokmotorfreight2423
      @zadokmotorfreight2423 5 років тому +1

      Definitely runs better, especially when you also rejet the carb, open up the airbox and use a uni filter.

  • @ryubombinha568
    @ryubombinha568 3 роки тому

    Se Deus quiser vou deixar a minha assim ❤️🙌🏾
    Olharas e verás

  • @juliosperez719
    @juliosperez719 4 роки тому

    Paano malaman gamiten Ang kambyada

  • @HalfAznKid
    @HalfAznKid 11 років тому

    would there be any negative effects if the arrestor were to be left off?

  • @verissimooliveira4778
    @verissimooliveira4778 5 років тому

    Tô precisando de um desse !