Ford 9 inch Disk Brake conversion - Jeep Wrangler TJ axle upgrade part 2
Вставка
- Опубліковано 5 вер 2024
- In today's videos I show you the cheapest way i found to put disk brakes on your Ford 9" axle. I spent countless hours researching so you don't have to!
Parts List: note, i am providing amazon links, so prices may be different as some parts are not the exact ones i used
Ruff Stuff Speacilties 9" disk brake bracket:amzn.to/35pCjqp
89 Bronco front brake rotors: amzn.to/36muK5l
73-87 Chevy 4x4 front Calipers: amzn.to/2FiJ6Yt, amzn.to/39BNMXr
Brake pads: amzn.to/35kLCbe
Brake hose kit: amzn.to/2sIR2zD
Check out our website: muddybeards4x4...
Amazon Store: www.amazon.com...
Get 10% off your purchase at Barnes4wd with this link or use “muddybeards” at checkout
www.barnes4wd....
Get your OnX Offroad Free trial and use Coupon code “Muddybeards” for 20% off your subscription. subscribe.onxm...
Get 10% off your Yes Welder purchase and using coupon code “muddybeards”
yeswelder.com/...
Yankum Ropes: yankum.com?afmc=1v
Get 10% off Olight Products, with coupon code “muddybeards4x4” www.olightstor...
Get 12% off the Setpower AJ30/40/50 With the coupon code: “MuddyBeards4X4”
www.setpowerus...
Tools I Use, MotivXTools: www.motivxtool...
10% off coupon code: muddy
www.setpowerus...
DISCLAIMER: Due to factors out of the control of Muddy Beards 4X4, we cannot guarantee against improper use or unauthorized modifications of this information. Muddy Beards 4X4 assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Muddy Beards 4X4 recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Muddy Beards 4X4. Be safe! This video and description contains affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
I love the creativity of grinding the flange! Brilliant! I wouldn't even have thought to check the run out on the rotors..that's a great heads up for all future brake projects!
👍🏻I am glad I checked, otherwise I would have been in for a surprise the first time I hit the brakes, lol.
@@MuddyBeards4X4 haha, seriously! These things are best done correctly the first time around 👍
That is going to be an awesome set up Kelly when your done . Thank you for sharing your projects with us . Looking forward to your next video . Until next time take care .
Another great vid! I did Disk brake conversion on my 8.25 when I installed my locker. I hope to start upgrading my steering parts next. Have a good Weekend. :)
Could always use Explorer rear brake kit for 9” ….internal small drum brake for e brake works really well without dragging issues, rotors can be ordered in any bolt circle. You’re welcome.
I love the barnes shirt while talking about ruffstuff brackets!
I like the drum e brake in the disk like the jk has.
Under cover fab makes a backet to hook up a mater cylinder to the factory parking brake handle
I have seen this, pretty slick. gets kinda expensive with the bracket and buying a master cylinder. I have been looking at the $25 eBay hydraulic e-brake handle. I have a few friends that use them and have had no problems with them👊🏻
Awesome upgrade.
That's a pretty decent savings
Thanks Kelly! I want to do this on my Dana 44
I always thought about putting a line lock for the rear for a ebrake
I will be doing that later down the road. They make e brake handles with a line lock built into it, which is what I will be trying out.
I have a lever line lock, I wondered if I'd trust it parked on a hill for a long time. I think it was intended for a forklift.
makes me better appreciate my lathe and mill, nice job
thats quite the hodge podge of parts but looks like it will work well.
Yea, it should, it is just the same parts that come with most kits, it’s just cheaper if you buy them separately. They just usually don’t reveal exactly what parts they use👍🏻
sweet! e-brake on the driveline would be simple enough if you wanted one
Well done!!!
Just parted out a 79 for a "Free" axle. These videos are a great help as I tear the axle down. One question is why you did not run hard lines right to the calipers then have a single flexible line?
You wouldn't be able to remove the caliper to change pads without also unhooking the brakeline.
couldn't you run a line lock for a parking brake press brake activate and there locked until you deactivate
Yep, the Jeep already has one, but it hasn’t worked since I have owned it. They make ebrake handles with a line lock built into it, I am probably going to go with one of those👍🏻
Great Video as always Kelly!!!! I’m still curious as to why you would not use the 8.8? Is it the gearing?
I have been getting this question a lot, so I am collecting some 8.8 parts to make a video showing the differences and why I am switching👍🏻
Thanks Kelly!!!
Thanks for the video. I think it will come in handy.
I recently bought some Dana44 axles from a 2006 JK for my 4.0L TJ.
Not exactly what I was looking for but I got both axles for $300. Apparently they have no brake parts. I didn't know this when I bought them.
I was planning to truss them and re-gear. I'm planning to run 35" tires but might go up to 37's if I get crazy.
Do you think these axles are worth it?
DISC!!
Where is part 3?
Does that disc setup stop better than the drum setup?
Not sure, I haven’t had a drum setup on this Jeep. But drum brakes work just fine as long as they are clean and adjusted properly.
What ever happened to Tim from bleepinjeep? He was one of my favorites on that channel. 🙁
🤷🏼♂️, I met him once at king of the hammers 2019, was a cool dude
Muddy Beards 4X4 yea seems like a cool dude. Wish he was still on bleepinjeep cause his and Matt’s videos were my favorite. Also I’m in Washington so if you ever do a fan ride type of thing that would be pretty cool or just message me lol I’m in graham like 30 mins from Elbe
How much stronger is that 9in. than the 8.8 it is replacing?
I am working on doing a video on this, since so many people have been asking me about it👍🏻
Think I'm running ford explorer disc breaks on my currie 9".
That is an option, but they are like $500, unless you can get everything from a junkyard and piece it together.
@@MuddyBeards4X4 by everything, it's just all the parts on the explorer 8.8 right? No adapters, no Frankenstein, just 8.8 backing plates, brakes etc?
Depends on which 9” axle you have, I believe the 8.8 backing plate works with the “new style” 9” big bearing ends only.
@@MuddyBeards4X4 this is relevant to the big bearing small bearing 9s correct? Is there a new and old style big bearing?
Hey Kelly, Im looking for a set of axles for a swap right now. Im hoping to find a HPD44 from an early 70s f150. Is your 9" from the same truck that you got the D44 from or is there a more desirable housing?
The front d44 will be the tougher one to find. I have the most sought after one from a 76. The 9” I have came from a 1980 f150. Much easier to find those. I used this as my guide for the d44. Hope it helps. www.therangerstation.com/tech_library/Dana44.shtml
So much work for just an axle and brakes. Plus I have no garage. No thanks!
Please tell me you didn't say caliber, it's a CALIPER!!! 😖
This whole thing is just way to janky.
Thats probably because you lack knowledge or experience with basic fabrication.