Running the 1930 Ford Model A Tractor

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 12

  • @jheydens
    @jheydens Рік тому

    You have picked a great hobby! You will learn so much. Keep up the good work.

  • @rpmunlimited397
    @rpmunlimited397 Рік тому +3

    I don't know how useful that old thing is, but I wish I had sitting in my front yard. I'd just sit on the porch and watch my neighbors get pissed off and I would laugh my ass off as they drove by and pointed.

  • @danielependola1580
    @danielependola1580 Рік тому

    Bravissimo! Pero' adesso ci manca un cofano motore ! 😄

  • @ModelARickLasCruces
    @ModelARickLasCruces Рік тому

    Sounds like the timing needs to be adjusted.

  • @thomasputnam4491
    @thomasputnam4491 Рік тому

    Why don't you fine tune the carb and the timeing now adjust them both till you get the best idel and a new set of plugs would be nice too.turn the idle mixture screw all the way in gently and back it out 1 and 1/2 turns then start from there and turn it both ways till you get the best idel same with the timeing..and a new set of p l ugs would be good too.

  • @danielitaliano4531
    @danielitaliano4531 4 місяці тому

    Flor de tractor..

  • @56dodgepickupman
    @56dodgepickupman Рік тому

    Tip of the day. The left lever on spark advance, should be retarded all the way up for start and should barely idle there. Half way down in about where you want it for moving around, the full advance all the way down is for high speed operation. You may want to turn the GAV on the chocker rod to dial in the fuel mixture when running a bit above idle. YOu got a litte way to dial it in but she is getting there. Keep up the good work, the bangers are a blast.

  • @chrispetitto2107
    @chrispetitto2107 Рік тому

    You need to re-adjust your needle valves on your carburetor.

  • @josedelmarmattos182
    @josedelmarmattos182 Рік тому

    Não saiu do lugar kkk

  • @gregwddriver
    @gregwddriver Рік тому

    I got one of these running and driving once. Whether its running right or not, the ride is absolutely horrible and any more than ten minutes is torture. Just buy a real tractor.

  • @andyb9072
    @andyb9072 Рік тому

    Good job I hope people realize your learning here . I hope you can invest in a microphone soon. I do have a question what your cousins channel called I could not make it out

    • @FarmNFixin
      @FarmNFixin Рік тому

      Farm N Fixin, check his description.