Such an awesome build Big B! As an rc boat builder I must say it turned out beautifull. I like the hatch design too. To me, the boat has kind of a Star Wars look to it 👍 Looking forward to the setup installation video. Cheers, DJ
Looks Good Big B. You'll get better and better. Look forward to the finish product. Need some stickers hats shirts to rep all your hard work and dedication to the Kraft
Easy to make : carbon L shape trim tabs, rudder mount, servo mount, motor mount (tilted) U shape servo tray, battery tray. All pressed between two alu lengths. Epoxy does hardly adhere to alu, so just wax it once. Just a thought...... Oh, your hatch looks factory design !
I've considered heating up some plexiglass for a U-shaped servo mount. Like you mentioned, wax it, then carbonfiber but aluminum sounds like a better idea thanks
Looks incredible. I have made a small carbon fibre tray as my first build so I can only imagine the satisfaction of building a full hull like you. Well done!
Looking good big B! Could fill properly and finish with paint and reveal the carbon where it's good.I actually think that a hull like the top of the hatch would look cool and one of a kind😊 👍🤙
Hell ya Son, looking great, very educational, can’t wait till You do a boat with a self-righting flood chamber of course with dual motors fingers crossed 🤞, BOAT GANG!!!
Nice job done ! REALLY nice. My first attempt, decades ago, was'nt nearly as good as yours. Someone mentioned Star Wars look. I made my latest boat entirely out of chopped strands templates, as for stitch & glue (without the stitching) Templates sqeezed between two glass panels. Better suited for bigger (45 & up) size V hulls. I totally agree with the suggestion vacuum moulding is the way to go. Again, many congrets with you're result !
Thanks, it's definitely a learning curve working with CF I'm use to laying out fiberglass cloth and polyester resins CF is on a whole new level! 👌 I can't believe how strong chopped strand carbonfiber lays out, especially backed with cloth amazingly strong
Actually that little boat is mean and lean Big B, I can see it with a eco mini mono set up with the shaft through mid ship bottom and the rudder underneath as well. Those eco,s are fast and turn on a dime. I especially like the cockpit/hatch you made. 👍 keepm comn and don’t forget the slow motion 🤣 BGFL
Love it you give me lots of ideas for future boats best boat channel on you tube imo. Peace & Prosperity, lol sounds like somthing spock would say ,star trek on the brain. Must be that boat shape ,cant wait like you to get it on the water.
Damn B that baby is gorgeous man! Crazy you made that hull yourself like that! It does mean so much more when you build something from ground up! Do you plan to sell any hulls? I def would like to build one out and add to my fleet! Let me know Sir and thanks for sharing! IRONCLAD BABY!
Im planning on it. I'm gonna pull one more of these hulls vacuum formed so I can get comfortable with the process, I've already started repairs on the drag boat, ordering the tooling gelcoat & polyester for the mold here shortly
@@IRONCLADRC that hull with 3s lipo will be fine, technically it is made on purpose and will be a lot of fun with incredible steering and very fast changes of direction.
ya me too lol within a few months of discovering Big B ive bought 4 boats and enough parts to sink the bismark LOL i asked him to make us a video on how to hide credit card bills and sneak stuff into the house without the wife seeing
![How I Made a Carbon Fiber Rear Wing [DIY]](/img/n.gif)
Such an awesome build Big B! As an rc boat builder I must say it turned out beautifull. I like the hatch design too. To me, the boat has kind of a Star Wars look to it 👍 Looking forward to the setup installation video. Cheers, DJ
I does look like some kinda futuristic sci-fi spaceship, lol. Hmmm. You've got me thinking now.
Looks Good Big B. You'll get better and better. Look forward to the finish product. Need some stickers hats shirts to rep all your hard work and dedication to the Kraft
Easy to make :
carbon L shape trim tabs, rudder mount, servo mount, motor mount (tilted)
U shape servo tray, battery tray. All pressed between two alu lengths.
Epoxy does hardly adhere to alu, so just wax it once.
Just a thought......
Oh, your hatch looks factory design !
I've considered heating up some plexiglass for a U-shaped servo mount. Like you mentioned, wax it, then carbonfiber but aluminum sounds like a better idea thanks
Beauty is in the eye of the beholder LOL. I think she looks beautiful too. It's gonna be an awesome runner; can't wait to see her fly. Cheers!
Looks incredible. I have made a small carbon fibre tray as my first build so I can only imagine the satisfaction of building a full hull like you. Well done!
That's what I did, started with small parts and molds basically worked my way up to this sci-fi boat from the future 😆
Looking good big B!
Could fill properly and finish with paint and reveal the carbon where it's good.I actually think that a hull like the top of the hatch would look cool and one of a kind😊
👍🤙
Hell ya Son, looking great, very educational, can’t wait till You do a boat with a self-righting flood chamber of course with dual motors fingers crossed 🤞, BOAT GANG!!!
That would be a tight setup but sounds like a good build idea
Enjoy the build videos really want to see the dragboat rebuilt ,vacumeform sounds like the ticket.
I can't wait to see is go..very cool boat..
Nice work! looking forward to the next video.
Nice job done ! REALLY nice. My first attempt, decades ago, was'nt nearly as good as yours.
Someone mentioned Star Wars look. I made my latest boat entirely out of chopped strands templates, as for stitch & glue (without the stitching) Templates sqeezed between two glass panels. Better suited for bigger (45 & up) size V hulls. I totally agree with the suggestion vacuum moulding is the way to go. Again, many congrets with you're result !
Thanks, it's definitely a learning curve working with CF I'm use to laying out fiberglass cloth and polyester resins CF is on a whole new level! 👌
I can't believe how strong chopped strand carbonfiber lays out, especially backed with cloth amazingly strong
looks like a fun build... following this
GREAT JOB! Who would have ever thought you could make a home made carbon fiber boat eh?
Awesome job big b! I'm proud for you. It's turning out great
Thanks, brother. The imperial star ship build lol.
Dude I was trying to place what it resembled. Star ship is it!
Dude you should have more subscribers I'm just getting into RC boats Fifth Scale and I'm learning from you thanks dude keep up the good work
I appreciate that! BG4L
Looks like a stealth type assault boat sweet.
Looking good big b
I use binder clip they are super cheap and work amazing for that kind of stuff.
Been meaning to pick some up..
Looking sick!
Actually that little boat is mean and lean Big B, I can see it with a eco mini mono set up with the shaft through mid ship bottom and the rudder underneath as well. Those eco,s are fast and turn on a dime. I especially like the cockpit/hatch you made. 👍 keepm comn and don’t forget the slow motion 🤣 BGFL
Love it you give me lots of ideas for future boats best boat channel on you tube imo. Peace & Prosperity, lol sounds like somthing spock would say ,star trek on the brain. Must be that boat shape ,cant wait like you to get it on the water.
Love it big b as always I
Cool stuff !
Damn B that baby is gorgeous man! Crazy you made that hull yourself like that! It does mean so much more when you build something from ground up! Do you plan to sell any hulls? I def would like to build one out and add to my fleet! Let me know Sir and thanks for sharing! IRONCLAD BABY!
I wanna see a carbon fiber drag boat.🇺🇲🇺🇲
Im planning on it. I'm gonna pull one more of these hulls vacuum formed so I can get comfortable with the process, I've already started repairs on the drag boat, ordering the tooling gelcoat & polyester for the mold here shortly
niceee BigB! next part pls😁
Thanks. Probably gonna be a few days before I upload the next one, next steps are time consuming
@@IRONCLADRC aaai! well Goodluck bro and wel see how it works out 😁
Why didn't you make this boat for the "ECO" category with submerged propeller?
I'm planning on building another hull, gonna go submerged drive
@@IRONCLADRC that hull with 3s lipo will be fine, technically it is made on purpose and will be a lot of fun with incredible steering and very fast changes of direction.
It's art waiting to be put in motion
👍👍
Keep the amazing content coming man ! It’s greatly appreciated and inspiring!
Check out my rc boat shorts .
You inspired me honestly 🙏✌🏽
ya me too lol within a few months of discovering Big B ive bought 4 boats and enough parts to sink the bismark LOL i asked him to make us a video on how to hide credit card bills and sneak stuff into the house without the wife seeing
When you find out how to sneak a 42 inch Boat around the wife let me know cause in definitely interested 😆
I appreciate that brother, boat gang for life