Amazon cheapest smart plug/socket, hacked Modify Teardown salvage BSD15
Вставка
- Опубліковано 31 тра 2021
- I bought the cheapest smart plug on Amazon! in this video I test the smart plug. I take it apart, to investigate the possibility of hacking it. And to see if there is useful parts to salvage. I also do some small modifications to see if it can be used as a smart light switch. You can also do a "no volt" hack to the relay output.
Please be aware that everything inside this unit is referenced to dangerous mains voltage! Always disconnect the power before working on it. Don't attempt any of these hacks. Unless you feel competent working on mains voltage appliances.
#ElectronicsCreators
I'd like to consent under this this video something about myself: sometimes I buy things what I don't need to take them apart.
I think we've all done that since we were kids 🤣. Take stuff apart, just to see what is inside. That is how I got into electronics😉
thanks, I just needed to see how to open this plug. Super Video❣️
Love the channel and joined when I first found you on UA-cam as I love all the hacks you do,
Is there any chance of seeing the Pound land socket teardown, I am interested in the quality of the product? Thanks, Bob in the UK.
I'm currently living in Portugal (Madera Island). So I'm nowhere near a poundland 😜. But I might be able to carefully take one apart that's in use at the moment, I'll try not to damage the casing too much. What I can tell you is that they use a Big good quality 16A relay, and they beefed up the tracks with with copper bars, so they can handle plenty of current. There's also an internal 2A fuse, just in case the internal electronics goes wrong. It seems pretty well made to "British standards". It's not manufactured badly like other Chinese crappy smart plugs.
Hello, I made the mistake of plugging a heater to this plug so it I believe it damaged the relay. It works fine when turned on but no voltage is provided to the output. I see a burn mark on the relay . Do I just replace that module?
by chance can you tell me what pin the relay was controlled by from the esp8266? and if possible a firmware dump of the device? I'm trying to upload tasmota to mine but would like to do so without opening it
It was quite a while ago now and I have since then moved house and put all my stuff into storage. I will try and go through my notes and see if I can find any info.
Hmm... I'm looking to modify an Alexa-enabled smart plug, so that I can use a remote push-button switch OR the built-in WIFI capabilities to activate it. Any useful thoughts or recommendations on a particular plug?
Application: I have an electric control panel box with a traditional 120v, maintained action switch that activates a 120v contactor. I want to be able to activate it via push-button OR via Alexa app or Alexa voice command.
Full details of application: This push-button switch activates the main power contactor of my electric home brewery. I'd like to be able to use an Alexa routine to turn it on roughly 1 hour before I wake up, which would make it power on and start heating my water to my target set temp in my PID controller. -> The routine would then turn on my grain mill and start crushing the barley 15 minutes before I wake up.
This would dramatically accelerate my brew days getting me back to my family about 90 minutes faster than I do today without any kind of automation...
I would recommend you use something like a Shelly 1 or a Sonoff MINI, as these are highly flexible smart switches which can be used for many different applications, and accept external inputs, like different kinds of switches. You can change how they are triggered by a momentary Push or toggle switch. You can probably directly drive the contactor coil from one of these. For example you can use the sonoff mini, with a push button connected to its S1 and S2 inputs, and the output can then switch the contactor or the original switch.
Is it possible for us to change the software service provider?
If i purchased a smart plug from company A. But realise that the back end software is not as good as company B , could i reset or reinstall the software in some way to make my device accessible via company B back end software?
Yes it is possible to change the firmware. The esp8266 has a large hacking community support. Tasmota is the preferred firmware.