@@maximumpowertrain1433 bro, why u don't answer simple question like how much to rebuild... Not exact $$, just a rough number? Also why u don't state where your shop is?
Sorry just been busy I haven’t had a chance to go online. Rebuild for 13speed roughly estimate is $3k exchange with core, for 18 is around $3800-$4k rebuild, shop location is in Brampton, Ontario Canada
Thank you for the video,I have a gearbox that I have stored for five years and now I can disassemble and repair it without a problem. Thank you very much.
Good job mate enjoyed watching your video and appreciate you're knowledge I have a problem with my brother's truck down under Australia with first gear deep reduction and trying to help him solve his problem found your video very helpful and informative
Do you have a part number for the support brace that's bolted to the trans and sets on the frame rails? I'm swapping out a 10 spd for a 18 spd. Trying to have all my parts ready for the install. Thank you!!
Do you mean the two studs with nuts for the 18speed? Im not sure about the support brace all i know is there’s 2 studs on the transmission that sometimes bolted on the frame of the truck.
Hi. My truck is a 10 speed manual (Eaton) the gears stock was on high range (I was told that this was a minor issue) But The mechanic told me it's a big damage, they need to rebuild it for $ 3500 without labor!!!. I agreed. Then I found out, that he replaced it with another one, that one doesn't have a cooler (my transmission had one) tell me please if what the mechanic did is right/okay?. Should I accept this transmission ( the new one without the cooler)? He's working on the truck now, haven't finished yet.. I still have time... should I accept what he did or not?? Please reply 🙏
If you’re doing a 918 transmission there’s no timing on the drive gear (4300938) all you need to time is the 2 countershafts, reduction gear & splitter gear in the back box. But if it’s a 7series transmission you need to time the drive gear (4300938) to the lower gears of the 2 countershafts in the back box.
Here’s a link to my other video on how to rebuild and time the back box for this transmission thank you for watching. ua-cam.com/video/Zqg7-IDvKWE/v-deo.html
@@eddiebartholomew9172 thank you for replying for me, im happy to help others that wants to learn how to rebuild transmissions. More power to you brother 👍🏼
Thanks!
Thank you so much sir 🙏
@@maximumpowertrain1433 bro, why u don't answer simple question like how much to rebuild... Not exact $$, just a rough number? Also why u don't state where your shop is?
Sorry just been busy I haven’t had a chance to go online. Rebuild for 13speed roughly estimate is $3k exchange with core, for 18 is around $3800-$4k rebuild, shop location is in Brampton, Ontario Canada
Thank you for the video,I have a gearbox that I have stored for five years and now I can disassemble and repair it without a problem. Thank you very much.
As a retired gear mech found this video to be spot on .thank God I'm done with it
seen this done and was amazed on how it went back together
Thank you so much
Good job mate enjoyed watching your video and appreciate you're knowledge I have a problem with my brother's truck down under Australia with first gear deep reduction and trying to help him solve his problem found your video very helpful and informative
Ain’t nothing like the legendary 18 speed.
Good job building those transmissions, that the way a proffesional mechanic should work...excellent job...
I like your videos alot, becos the way you do your the assembly is clear and straight foward, makes it easy to understand
This is what i call skills! Great work, man!
Thank you
This dude is BAD ASSED !!!
Great job!!! you definitely make it look so easy. Also great lighting on video. Thank you!
Thank you 🙏🏼
Thank you, that really helped me with my reassembly. Great video
You make it look so easy. Thanks for the video.
Years of experience that’s what makes it look easy brother.. Thank you for watching 🙏🏼
Great video
You acquired great skills over the time
Thank you 🙏🏼
Nice one! matindi talaga itong channel mo bro! Good Luck!
Salamat tol, mas malupit channel mo bro shoutout kita sa next video ko tol!
Very impressive....nice work !
Thank you sir 🙏🏼
Demonstrando o câmbio do Ford cargo 4532 valeu 👍
Thanx for the detailed video bro
Thank you for watching bro 🤜🏼
Интересно и полезно. Отлично!
I am intrested in finding out where to purchase the main gear box gear set up for a RTLO18913A OR A RTLO 20913A
Que líquido pones antes del empaque?
Hola y gracias , lo nalo que se saltan los pasos impotantes , como por ej.como poner el ultimo sincronizadot , bueno
Great job. Thanks.
Tell me, please, how to sort out 16913a, we don’t have specialists, I started to rattle what nuances, I’ll disassemble it myself
You can watch my other video on my channel, “how to disassemble & reassemble a 13 speed transmission
Hi guys, here’s the link on how to assemble the auxiliary back box. Thank you all for watching. ua-cam.com/video/Zqg7-IDvKWE/v-deo.html
Awesome do you have a video of the main shaft assembly
Thank you! Yes check out my other videos.
Ang galing galing u talaga insan lodz.ingat lagi
Thank you insan ingat din
good job!👍
Thank you
Love your videos man
Can you tell me what i need to make my 18918 into true 22918
Please and thank you 🙏
I like the rtlo-11118a-mt.
I like your shop, becos it clean...
Thank you
Good video mister. Any recomendation on how to come to any transmissions shop as begginer?
Best transmissions
Thank you 😊
Any tips on the top reverse idler gear?
What’s wrong with it?
@@maximumpowertrain1433 I put revrse in place before getting it installed. Whoops
Explicarlo paso paso como armar y desarmar
Dati nakakagawa pa kami ng ganyan ngayon wala na puro howo nalang😅
What oil ? Regular 50 weight or synthetic ?
What rebuild kit number did you use I'm trying to find a rebuild kit for mine
I usually just buy the parts all separately, don’t have a rebuild kit for it.
@@maximumpowertrain1433 ok thank you I liked your video
Thank you very much!
How much cost for rebuilt one?
Eu amei o seu vídeo 👌
Do you have a part number for the support brace that's bolted to the trans and sets on the frame rails? I'm swapping out a 10 spd for a 18 spd. Trying to have all my parts ready for the install. Thank you!!
Do you mean the two studs with nuts for the 18speed? Im not sure about the support brace all i know is there’s 2 studs on the transmission that sometimes bolted on the frame of the truck.
Nice 👌
Thank you sir 👍🏼
Hi. My truck is a 10 speed manual (Eaton) the gears stock was on high range (I was told that this was a minor issue) But The mechanic told me it's a big damage, they need to rebuild it for $ 3500 without labor!!!. I agreed. Then I found out, that he replaced it with another one, that one doesn't have a cooler (my transmission had one) tell me please if what the mechanic did is right/okay?. Should I accept this transmission ( the new one without the cooler)?
He's working on the truck now, haven't finished yet.. I still have time... should I accept what he did or not?? Please reply 🙏
Good luck
What's the difference between 18918 and 16918(which parts), is it possible to be converted?
One is 1850 torque the other one is 16k torque to convert you would have to change some few gears on the counter shafts and main shaft
@@maximumpowertrain1433 all of them?
De Montandon o câmbio do Ford cargo 4532 valeu 👍
Do you have any 18918B 18 speeds for sale?
That main trans case looks like it had severe rust scaling before you cleaned it up, good video though .
Thank you!
Meu parabéns 👏
Nice
Vc e demais cara 👌👍👌
When your installing the back box is the gear on the back of the main box supposed to be in time as well?
No it does not
@@eddiebartholomew9172 thanks really appreciate it
If you’re doing a 918 transmission there’s no timing on the drive gear (4300938) all you need to time is the 2 countershafts, reduction gear & splitter gear in the back box. But if it’s a 7series transmission you need to time the drive gear (4300938) to the lower gears of the 2 countershafts in the back box.
Here’s a link to my other video on how to rebuild and time the back box for this transmission thank you for watching. ua-cam.com/video/Zqg7-IDvKWE/v-deo.html
@@eddiebartholomew9172 thank you for replying for me, im happy to help others that wants to learn how to rebuild transmissions. More power to you brother 👍🏼
А где сборка делитезля? Демультипликатора????😢
Buenas noches....k kiere desir la letra b
Muito bom gostei 👍
Gostei 👏
Vc e demais 👍
Aba sinisipag ka yata ngayon mag upload tol 😁
Hehe oo tol, ngayon lang nagkaroon ng time saka nakaka tamad mag edit eh 😅
Panis😁👍
Hehe salamat tol
Less shitty music, more actual explaining what’s going on.
I would rather hear everything sped up and chipmunk sounding than this shitty music, but otherwise a good video of you watch on mute
Con un relato o explicacion seria mejor
It would have been better with explanation of how to do it . And not with the music.
Not a whole lot bigger than the Super T10 in my '69 Mustang then...
Vc e demais 👍