What aftermarket turn signals are those? They look good. And so does the new headlight! Definitely going to install them on my Hawk after I get a new battery/get it running again.
the Oil drain plug somehow came out and I snaped the rod and locked the engine on my hawk 250... So idk what to do a new loncin engine with the wireing harness is $900 off eBay I can get one somewhere else without the wireing for $700... Thoughts?
Did your hawk have LED lights before you made the upgrade? Mine has regular bulbs.. I tried a led bulb and it blew out due to voltage irregularities. 🤔
Thank You Sir. This looks , and I'm sure it functions much better than it even looks. One thing that would make it look Kooler to match that round lite would be to get a 70s rounded dirt bike front fender to go under it. I seen one that was being worked on with the tank plastic off. When I order one , it'll soon get tank plastic taken off filled over at the plastic mounting points and painted smooth. But really glad you shared the wiring video.
the 5.75 headlight coulda been used as well and maybe have cut the original mounting system by cutting the plastic to accomodate the round 5.75 headlite.
Not sure. You could try a Google search. I've never had to buy plastics. I know a lot of parts from the CSC TT250 will fit and they have a nice online parts ordering website.
Did you end up having to do a different turn signal relay? I installed one of these headlights and new turn signals in the rear (deleted the front turn signals) and I was having a constant on issue so I had to buy a lower amp rating relay.
In the description. But I'll list them here for your convenience. Headlight Housing amzn.to/3sJS9If 7" LED Headlight amzn.to/32IczqI Additional Brackets amzn.to/3xmuwsX
@@JackofAllMasterofNone Thanks. I still don't see " the description ". You don't have to reply. Maybe I'll save money, not knowing! Thanks for the info.
You need to work on your explaining better if this is a troubleshoot video to help people out, or if it's just a showoff video 🤷🏻♂️ but.yea I didn't catch really none of them wires or colors I just heard these wires ,couple these wires here, slice here, not a good trouble shoot or whatever video "educational or teaching"
No offense, but I don't have to do anything better. I don't get paid to make these videos for you. I try and do my best to film some of my personal projects as a courtesy to help out other people who may be attempting a similar project. If someone watching can't figure out what wire runs to their turn signal, they should not be attempting this project.
Run 93 Octane in all air-cooled motors to slow down carbon deposits! once carbon has built up it knocks have to take it apart and clean the carbon of the head and piston!
Finally thank you I was hoping to see exactly this upgrade!
dude ur setting the bar pretty HIGH for the rest of us hawkEYES. lol. keep up the BUILDs👏
What aftermarket turn signals are those? They look good. And so does the new headlight! Definitely going to install them on my Hawk after I get a new battery/get it running again.
the Oil drain plug somehow came out and I snaped the rod and locked the engine on my hawk 250... So idk what to do a new loncin engine with the wireing harness is $900 off eBay I can get one somewhere else without the wireing for $700... Thoughts?
You can run a Brozz 250 motor for less than $500. See # 9 here: shop.brozz250.com/eshopprod_cat_5820562-5934987_product_8596255.F8-Engine_Assembly.htm
Did your hawk have LED lights before you made the upgrade? Mine has regular bulbs.. I tried a led bulb and it blew out due to voltage irregularities. 🤔
It did have LED lights since day 1
Turn that in to a super moto 👌 good product
What color wire is the high beam on the hawk??
Thank You Sir. This looks , and I'm sure it functions much better than it even looks. One thing that would make it look Kooler to match that round lite would be to get a 70s rounded dirt bike front fender to go under it. I seen one that was being worked on with the tank plastic off. When I order one , it'll soon get tank plastic taken off filled over at the plastic mounting points and painted smooth.
But really glad you shared the wiring video.
by saying itll start in gear you mean that itll just start up in any gear its sitting in right?
Yes
Grab that rear sprocket my guy see how u like it....35 - 38 the smaller the rear the faster u go....each hear will have higher speed before each shift
the 5.75 headlight coulda been used as well and maybe have cut the original mounting system by cutting the plastic to accomodate the round 5.75 headlite.
Looks good gives the bike a fresh look
What size front rim do you have?
Got shinko 700's need >1.60 rim for mounting. Hawk comes with 1.40.
What brand and size of clutch break levers will fit the stock perches?
Did yours come with the rubber pieces where the bottom sit in??
You mean for the stock headlight? If so apparently not.
@@JackofAllMasterofNone yes the 2 tabs the the headlight assembly sits in mine has 2 rubber plugs that sit in the holes and the assemble sit in those
@@elderrider9298 Mine did not have them. Probably one of the reasons it moved around too much. Lol
Hey buddy I recently purchase a hawk dlx, I was wondering where can I get the plastics kit for it.
Not sure. You could try a Google search. I've never had to buy plastics. I know a lot of parts from the CSC TT250 will fit and they have a nice online parts ordering website.
Came out awesome! Light has alot of cool features. Thanks for sharing 😁👍
What turn signals do you use?
Worked out good, thanks!
Real sick buddy
Looks good
Where did you get that headlight assembly from
Headlight Housing amzn.to/3sJS9If
7" LED Headlight amzn.to/32IczqI
Additional Brackets amzn.to/3xmuwsX
Did you end up having to do a different turn signal relay? I installed one of these headlights and new turn signals in the rear (deleted the front turn signals) and I was having a constant on issue so I had to buy a lower amp rating relay.
If you have an older Hawk, pre 18 or 19 (I believe) the turn signal relay doesn't like LEDs. In my case it worked perfectly.
@@JackofAllMasterofNone I have a 2020.
@@gtlogic2362 Sorry not sure why. You are the first one I've heard of having this problem with a newer Hawk.
@@JackofAllMasterofNone yeah I havnt heard of this issue. You can see what all i have done in my last youtube video
Is there any more pioneer videos coming
I have a few projects planned, but it will be a little while before I can get to them.
Looks great!
Can someone tell me where I can see the links to parts used?
In the description. But I'll list them here for your convenience.
Headlight Housing amzn.to/3sJS9If
7" LED Headlight amzn.to/32IczqI
Additional Brackets amzn.to/3xmuwsX
@@JackofAllMasterofNone Thanks. I still don't see " the description ". You don't have to reply. Maybe I'll save money, not knowing! Thanks for the info.
Dammit, now I see. Had to click on ' see more'
Question, I did look for the answer below first. Did you get the headlight only or the “with bracket“ option?
You need to work on your explaining better if this is a troubleshoot video to help people out, or if it's just a showoff video 🤷🏻♂️ but.yea I didn't catch really none of them wires or colors I just heard these wires ,couple these wires here, slice here, not a good trouble shoot or whatever video "educational or teaching"
No offense, but I don't have to do anything better. I don't get paid to make these videos for you. I try and do my best to film some of my personal projects as a courtesy to help out other people who may be attempting a similar project. If someone watching can't figure out what wire runs to their turn signal, they should not be attempting this project.
@@JackofAllMasterofNone Agreed.
Bloody liberal socialist huh!
It’s what 4-5 wires? Look at colors think critically google n just use your own brain
Run 93 Octane in all air-cooled motors to slow down carbon deposits! once carbon has built up it knocks have to take it apart and clean the carbon of the head and piston!