It reminds me my grandmas walls inside her old village house. There is something rustic and comforting in the appearance of these walls. You are a great inspiration for anyone!
Put it on with a roller, use an ox speedskim to flatten it out, 2 coats required. I use Gyproc EasiFill 60 for a cheaper alternative but have to mix it yourself. Second coat should be mixed to a more watered down consistency.
I've never seen anyone skim a wall like this... For the best results you should prime the walls and then skim the walls using multi finish. Apply the plaster using a hawk and plastering trowel. If I were you I would have replaced all the old skirting, and skimmed the the room with thistle multi finish. Depending on the state of the original plaster I would have been tempted to go back to brick and board the room with new plasterboard. At least it's done properly and will last years.
Agree but bear in mind this is a diy'er not a tradie..this stuff good for patch work or doing small little areas like small toilets ect providing there no damp issues ect.. but yea I agree there an underlying problem there in the walls that either needs full rip down and plaster or abit of external jointing on any render cracks them could get away with interior skimming...
Good on you having ago and plastering ain't an easy job especially for a diyer...this product is good if you want to cover some old artex or a small area that needs just abit of tlc as the point of this stuff is for the hone diyer to do small things as stated...always use some pva first though...I used it on an area about 3x4 by 8 foor high and no issues...but if you got damp ect you should check external issues first or just get a trade to skim and treat properly...just an opinion but good on you having ago.
I am thinking of using this as an alternative to bringing in a plasterer to do my walls. Are you happy with the finish or did you have to put wallpaper liner on the walls. Also are you saying that you can get the stuff in powder form which will be a lot cheaper? Thanks
Can this be used directly onto plaster walls? We had some wooden panelling that was glued to the walls. We’ve pulled it off and it’s removed the paint layers down to the plaster. I’m assuming this will work with filling the gaps again but can I go straight on or will I need to do a white wash first?
thanks for the video! I just bought it myself to fix some irregular walls... but mainly for the ceiling from which Ive removed woodchip paper 😏 I think ill lose my patience will need a bigger brush and tool 😅 but did u do the ceiling as well? Was it difficult? I was unsure of adding pva because it says to put direct on plaster so i guess we'll see! 😬
@how2not222 thank you! fyi for your future usage: I bought this, used it and as well as barely finishing the wall it wasnt as smooth as I wished. I then decided to buy a trowel, some ready mix plaster (22kg cost me 30eur) and... so much better! Still no expert but a million times better, give it a go youll see its actually easier! I will have to try the ceiling afterwards I did hear some guy talking about watering it just a tiny bit down and using the roller... we shall see 👀
Looks great and I’m about to try it myself. You said about using bagged plaster as a cheaper alternative. Would you still use a brush to apply and what consistency would you us?
@@how2not22 Hi very helpful video, i was just wondering with these ready made skims is pva not needed at all? as I have read reviews from different products that say they had shrinkage and cracks on the surface after it dried.
@@how2not22 Ingenious! my old damp wall now drying out could do with a skim like that. But when the wall is fully dry but may still have a damp smell do i wash it with bleach or vinegar first and will the skim also help with blocking it. Do i need to use PVA first? Thanks.
Danny DeVito is 4ft tall give or take a few inches which is the same measurement as the width of the room. Danny DeVito also played Penguin in the Batman film and did you know a emperor penguin is also 4ft tall.
Yeah ive never seen plastering like this but hey it worked, just get a plaster pre made mix, trowel and hawk as its a million times easier dilate pva glue the area then apply the plaster, once dry wet the trowel and skim over to smooth it out.
This is not how you should “skim” over mould.. PVA or SBR primer first then a multi finish bagged plaster.. I can’t believe I seen this being applied with a paint brush 😂 anyway that’s why the bed is against that wall
It reminds me my grandmas walls inside her old village house. There is something rustic and comforting in the appearance of these walls. You are a great inspiration for anyone!
Put it on with a roller, use an ox speedskim to flatten it out, 2 coats required. I use Gyproc EasiFill 60 for a cheaper alternative but have to mix it yourself. Second coat should be mixed to a more watered down consistency.
What is speedskim?
I've never seen anyone skim a wall like this... For the best results you should prime the walls and then skim the walls using multi finish. Apply the plaster using a hawk and plastering trowel.
If I were you I would have replaced all the old skirting, and skimmed the the room with thistle multi finish. Depending on the state of the original plaster I would have been tempted to go back to brick and board the room with new plasterboard. At least it's done properly and will last years.
Agree but bear in mind this is a diy'er not a tradie..this stuff good for patch work or doing small little areas like small toilets ect providing there no damp issues ect.. but yea I agree there an underlying problem there in the walls that either needs full rip down and plaster or abit of external jointing on any render cracks them could get away with interior skimming...
I think this lasted longer than 5 mins and she didn’t have to pay someone £1000
I agree mostly, but there is no damp in that room it is just condensation windows are probably unvented
Grreat Video....Can I ask why does Danny Devito appears on screen for a split second ( 1:39) Regards Panda
Thank you , really helpful, gives me the confidence to give it a go myself
As I have a number of walls to do which bag skimming plaster would you buy and could I apply it with a roller and rubber edge skimming blade, thanks
Good on you having ago and plastering ain't an easy job especially for a diyer...this product is good if you want to cover some old artex or a small area that needs just abit of tlc as the point of this stuff is for the hone diyer to do small things as stated...always use some pva first though...I used it on an area about 3x4 by 8 foor high and no issues...but if you got damp ect you should check external issues first or just get a trade to skim and treat properly...just an opinion but good on you having ago.
I am thinking of using this as an alternative to bringing in a plasterer to do my walls. Are you happy with the finish or did you have to put wallpaper liner on the walls. Also are you saying that you can get the stuff in powder form which will be a lot cheaper? Thanks
Can this be used directly onto plaster walls? We had some wooden panelling that was glued to the walls. We’ve pulled it off and it’s removed the paint layers down to the plaster. I’m assuming this will work with filling the gaps again but can I go straight on or will I need to do a white wash first?
Would this be any good for anaglipta plaster, raised plaster affect which is terrible, would this work
thanks for the video! I just bought it myself to fix some irregular walls... but mainly for the ceiling from which Ive removed woodchip paper 😏 I think ill lose my patience will need a bigger brush and tool 😅 but did u do the ceiling as well? Was it difficult? I was unsure of adding pva because it says to put direct on plaster so i guess we'll see! 😬
Yes I did do the ceiling, It was tiring, my arms did hurt but I would advice to use a skimming tool to apply it to your ceiling and smooth it.
@how2not222 thank you! fyi for your future usage: I bought this, used it and as well as barely finishing the wall it wasnt as smooth as I wished. I then decided to buy a trowel, some ready mix plaster (22kg cost me 30eur) and... so much better! Still no expert but a million times better, give it a go youll see its actually easier! I will have to try the ceiling afterwards I did hear some guy talking about watering it just a tiny bit down and using the roller... we shall see 👀
Did you have to mix the tub with water because its quite thick to apply??
No I just applied it straight on the wall without thinning it down as my mouldy walls needed good coverage.
What brush are you using? Thank you
looks like a from turtle's tail,.
Thank you that was very helpful
Like the footwear...
Thats not footwear. She had a pet bunny . Those things are always getting under your feet
Looks great and I’m about to try it myself. You said about using bagged plaster as a cheaper alternative. Would you still use a brush to apply and what consistency would you us?
You can use a roller with bagged plaster
Masking tape on skirts a good idea.
Really nice work!
Thanks a lot!
@@how2not22 Hi very helpful video, i was just wondering with these ready made skims is pva not needed at all? as I have read reviews from different products that say they had shrinkage and cracks on the surface after it dried.
@@chrissy212e Hi, just you like to know if what you asked or found out is right about the PVA ? thanks.
@@how2not22 Ingenious! my old damp wall now drying out could do with a skim like that. But when the wall is fully dry but may still have a damp smell do i wash it with bleach or vinegar first and will the skim also help with blocking it. Do i need to use PVA first? Thanks.
Nice job
4 feet and a smug pic of Danny Devito suddenly appears LOL🤣
Thank you!
You're welcome!
1:39 ??
Danny DeVito is 4ft tall give or take a few inches which is the same measurement as the width of the room. Danny DeVito also played Penguin in the Batman film and did you know a emperor penguin is also 4ft tall.
Yeah ive never seen plastering like this but hey it worked, just get a plaster pre made mix, trowel and hawk as its a million times easier
dilate pva glue the area then apply the plaster, once dry wet the trowel and skim over to smooth it out.
You done it wrong it's a plaster not painting, multi finish is what you use
the intructions say to start off by using a brush to apply the plaster but I found using a skimming tool more useful at smoothing the plaster.
Omg and I don’t mean omg in a positive way.
They needed tomlearn how to domproper video what how and step by step . Wasted time to watching this
This is not how you should “skim” over mould.. PVA or SBR primer first then a multi finish bagged plaster.. I can’t believe I seen this being applied with a paint brush 😂 anyway that’s why the bed is against that wall
Tbf the guidance for that product tells you to paint it on.
It actually looks good applied with a paint brush I might do it myself
That just the instructions on the box but hey ...mm
That must have took you ages with that small paint brush
Rubbish