*Table of Contents:* - Intro [0:00] 1 - Remove Old Tip [0:35] 2 - Scrape Ferrule [1:08] 3 - Prepare Tip and Ferrule [2:02] 4 - Tape Ferrule [2:30] 5 - Glue New Tip On [2:55] 6 - Remove Tape [3:44] 7 - Trim Tip [4:04] 8 - Sand Tip [4:40] 9 - Clean Up Tip and Ferrule [6:16] 10 - Shape and Chalk Tip [7:10] - Wrap Up [7:43] ---- process montage [8:20] *Supporting Resources:* - detailed 10-Step Cue Tip Replace Procedure document: billiards.colostate.edu/resource_files/cue-tip_replace_handout.pdf - cue tip replace resource page with other videos: billiards.colostate.edu/faq/cue-tip/replacing/ - Efren “The GOAT is my Hero” T-shirt: drdavebilliardtshirts.com/product-category/humor/goat-hero/
I know this is off topic, (thank you for the cue tip know how!!❤❤) but the Blue Pool Table you use in your videos, aka your 57 ball run out (impressive by the way 👏) blue pool table. What are the dimensions of that? Is it 8x4 or 7x3.5 or 6x3? And what kind of Felt are you running on it? I'm just very curious. Thank you DrDaveBilliards :)
@@KlutchKidTM I don't know for sure but I think it's a 9-foot table. They're always half the width of the length I think. Usually the playing surface on a 9-foot table is 100 inches playong surface. Most likely it's simonus that's usually what everybody runs but you could be champion or Andy cloth hi imagine it's one of those three
As a filipino pool player this practice is basicaly mandatory because lathes aren’t always available and l’m always thankful that there are tutorials like this.
Yep. I am not Filipino, but I play a lot of pool in the Philippines and this method is almost exactly how I change my tips in the Philippines. Once you do it like this a few times, it is quick and very easy.
I'm a guy in the US, and would rather do things myself than pay for someone else to do it, simply for the aspect of learning how to do it. I love pool and working with my hands, so why not?
I'm glad you covered this. I've done it before but the tips never lasted. This was much more detailed and had a few step where I went wrong in the past.
The tip and the glue matter. I ran two pool rooms for years. We had a handy all-in-one tool that I wish I still had that put tips on. But, one thing we found through 1000's of tips was the glue. We ended up liking Loctite Gel Super Glue. It does not dry completely brittle and has some give to it and allows the tips to stay on for a long time.
I had to go look for that old piece. It was called a Willard Tipping Machine. I really enjoyed putting tips on with that. Had to be careful, you could mess a ferrule up.
Dr. Dave. This video saved my stick. I bought all the usual tools online; they just dug in and ruined tips. Other than the cue top sander, everything else failed. I used your process and now have a perfectly installed tip! Excellent video! I used 80 and 120 grit then switched to 1000, 2000, then 00 steel wool to finish the job. Thanks!
I did my first tip install yesterday. Followed the video to a T. Cane out beautiful. Thanks once again! I will order larger diameter for my next que. It was tough trying to center the tip after gluing. I had no room for error. My que was 12.99mm and tip was 13.01. having a larger tip size will be easier to install. Excellent video
As always, great video. I am going to be doing this for others, now. I bought those ball bearing roller sets on Amazon. You'll see them for about $20. I believe it will make the process even easier. I'm also going to be fabricating a tool for the tip tool that allows for cordless drill use. I suppose eventually I'll graduate into a lathe attachment to turn my corded drill into a lathe or the bench to grinder, that I've seen on UA-cam quite a bit. Very rewarding and relaxing hobby.
An additional thing I like to do is to "set the chalk." Basically once you chalk up, use one of the rasp like tools to roll on the tip and embed chalk into the tip, then rechalk and it's ready for play. This is especially important on hard tips. There are tools made just for this, but often the flat scuffer part of tip tools will do the same thing, or you can use a fine rasp.
Excellent video and tips. This is very close to how I have changed many tips for years with great success. Never have I had a tip fail and never had I had to pay someone else. Your method is fairly detailed and if someone just takes some time it is pretty hard to mess this up.
Thanks. There are some things that can be messed up. For examples you can easily damage the ferrule during the shaving/scraping/sanding or by sanding the tip down to diameter with too much pressure or with cover paper too thin. But I agree that with a little care and experience, the procedure is reliable.
Dr. Dave thank you for the video. I don't comment on a lot of your stuff . but you help me in many many ways. If I would have seen this video a couple weeks ago I would have saved a lot of dollars thank you very much for you and your time sir
Excellent Video. The last tip I changed on my Viking kept falling off after a few days. Finally stayed on after a heavy dose of superglue, and has been there for a couple of years (during pandemic). Now I have a new Kamui soft tip to apply, and I'll follow all of your great tips, I'm sure it will turn out well. Thanks Dr. Dave!
I was given an older McDermott cue and the tip was dry rotting (crumbling when I shaped the tip). I followed these instructions and it came out beautiful. I break with this cue and have had no problems what so ever in the last 3 months I've used it. Great advice. Thanks
@@DrDaveBilliards Haha. That's actually something I have plenty of. What I didn't have was the technique. I will be using yours over others I've viewed on UA-cam! It's clearly sound if you're malicious! I'll let you know on here how it goes.
Was able to follow step by step only thing I would warn people against is when you cut the old tip off and start shaving the ferrule be careful to not shave off any of the ferrule. I had to do some sanding work to get it as flat as possible when I did that by accident. All in all great video
I just changed the tip using your method and I think it came out quite well. Going to try it next week but I'm pretty satisfied with it :) I'm going to get a tip-shaper tho. Doing it with sandpaper was just a bit too tricky and time consuming because it came out a bit uneven and flat on the top first and had to try to reshape it.
@@DrDaveBilliards Forgot about this comment, but yea i installed my tip myself and it went out really well and it took me around 3.5 hrs to get the tip (How Medium Tip) the way i liked. This helped a lot! Thanks DrDave!
Did you watch me sometime in the last 30 years? That's about how long I've used (almost) this exact method. I curl sandpaper to trim the sides of the new tip, with one layer of tape around the ferrule.
I like your tape idea to increase the diameter as a sort of jig to help center the tip. I will try this next time. I find it is a lot easier to dress the tip if it is properly centered so that the factory crown lines up, then final shaping is much easier to accomplish than when the tip is off center and you have to remove material from one side of the crown to recenter it.
A collapsable small silicon funnel, cut the narrow end so its just wide enough to be snug fit over the ferrule. Wide end facing away from the cue, then press the new tip into the funnel. Perfect centre everytime.
Thanks Dave and Bob. I scratched up a ferrule on my snooker cue before. That paper over sandpaper method would’ve helped. Got 2 more cues to do, I’ll have to remember patience.
Thank you for the detailed step by step procedure. A lot of work goes into this! Much appreciation for the cue tip mechanics:) My new shirt order is on its way! As promised!
You're welcome. I'm glad you continue to enjoy the shirts. I look forward to seeing one in a future video. I just got an "Efren - I Got Lucky" shirt to wear in one of my future videos.
@@DrDaveBilliards i was going to order that shirt as well however i was eeire about the order being shipped from elsewhere... i look forward to all your videos. Taks care for now Dr. Dave.
Well, I watched, I took my time. The results Im quite pleased with!Thanks for your video, with your help I put on a brand new BULLETPROOF tip. This was my first attempt at this. Again Im quite pleased. Thank you! I would love to upload a pic! Unfortunately im not so good with tech.
@@DrDaveBilliards President of The Universe! Would you recommend this approach for the Kamui clear tips with a plastic bit on? Their instructional vid (ua-cam.com/video/Dh8w7W7xPms/v-deo.html) uses a couple of different knives which look really cool but I'd rather keep the £50-60
You're welcome. Honestly, I still prefer having a good "tip guy" do it for me, but it is nice to have a back-up plan in case a good "tip guy" isn't readily available.
This is the best tutorial I could find on the internet so good job. I still suck at it so I’ll have a professional do it next time, lol. But still good job with the video.
Great video Dr Dave. As a top fitter myself I would like to offer a few suggestions. Try using a very sharp blade or a scalpel to get the tip flush with the ferrule. That way u wouldn’t have to sand the edges too much. Secondly u should NEVER sand the ferrule.
That's probably a better method than what I did pressing down with my finger, sanding the ferrule and the tip at the same time with 220, turns into 320 when the 220 is used, maybe I'll finish it off with the 2000 grit I have and water the edge like that. If my tip comes off again I think I can do a better job than my current one after watching this, thanks.
Super handy video. I've been Looking at cues on ebay. Often times they don't come with a tip. Have you tried painter's tape ? It may be easier to remove.
I'm glad you like the video. Painter's tape is a good idea. Scott Magic tape is nice and slick and I think it provides better protection, but I'm not sure.
Awesome video. Replacing a cue tip can be a daunting task for the uninitiated. I have replaced my own, as well as friends, for many years. Tweeten makes a decent cue tip tool kit that is fairly cheap. However, I will refer this video to anyone who wants to try it for themselves for the first time. Do you prefer the liquid or gel-type CA glue?
I keep my Milwaukee pocket knife 6 in 1 that is a utility knife glue and sandpaper in my bag for this I even have rubber bands to hold the tip on as I seen that is what McDermott does for their method
@@IndianHeathen1982 The process is the same for a Revo. You just need to be even more careful. All procedure and supplies details can be found here: billiards.colostate.edu/faq/cue-tip/replacing/ especially in the document linked at the top. Glue advice can be found at the bottom.
NICE! I've been replacing my own tips for many years and of course bought all the 'special' tools, this sure would have been cheaper! (great process!) The superglue GEL is the most important part. It's the only thing I've found that works well consistently.
Thank u for the video. What is the tip 's material made of? I have a cue stick but it doesn't seem to hold chalk. I will have to replace it with the authentic material.
The only maintenance I recommend is wiping down with a damp rag or paper towel periodically. Carbon fiber shafts are really low maintenance. See: billiards.colostate.edu/faq/cue/carbon/
FYI, all details are here: billiards.colostate.edu/resource_files/cue-tip_replace_handout.pdf I used Super Glue Gel, but any Super Glue or Loctite should be fine.
I posted a comment about this video a year ago saying this method is very close to how I have changed tips for many years. I stand by that, but want to add one more thing: don't fall for these guys that want to charge you a bunch of money to replace tips! It is actually VERY easy if you just follow what Dr. Dave showed in this video. Don't be afraid to change your own tips. Also, carry a little tip changing kit with you. Three days ago I broke a tip while playing. I missed a shot, and in frustration sorta jumped up and accidentally hit the tip of the cue on a wood frame. The tip came off. This tip had last me two years and a lot of hitting the cue ball. It didn't come off because it was put on poorly, it came off because the wood frame it hit, hit it perfectly and knocked it off. Any tip would have came off after being hit that hard, at that angle. Thankfully I had a little tip changing kid with me. A tip, a sharp knife, some sandpaper, some glue, and a tip shapener. Within 15 minutes, literally 15 minutes, I was back playing with the new tip on my cue and the tip performed just fine. If I can do it, so can anyone else. It truly is not that difficult.
Hi Dr.Dave, thanks for the video! I used to replace tips myself when I was using a wood shaft. Not sure how those steps can transfer to replacing tips on a CF shaft.
@@DrDaveBilliards Hi Dr.Dave, thanks for replying. I ask mainly because a lot of the CF shafts have a soft silencer pad between the tip and the actual shaft/ferrule. I am afraid that the "tip scraping" step would damage that pad.
I really wish I hadn't just taken my tip off my first cue. I didn't realise so much was involved in getting a new tip on... Thanks for a great instructional vid tho😊
It is Super Glue gel. You should be able to find it on Amazon. FYI, details like this (and more info and advice) can be found in the document linked here: billiards.colostate.edu/faq/cue-tip/replacing/
@@shader26 FYI, all detailed info like this can be found in the document linked in the video description and pinned comment. Here it is: billiards.colostate.edu/resource_files/cue-tip_replace_handout.pdf
@@shader26 You're welcome, and thank you! FYI, more info and advice (from me and others) can be found here: billiards.colostate.edu/faq/cue-tip/replacing/
@@DrDaveBilliards That worst part of the job for me was getting the tape off the ferrule! That was a little frustrating. Also, and I know this was maybe dumb, but it was a Sunday and where I live there are no hardware stores open on Sunday, all I had was super glue, not the super glue gel. I hope it works but am prepared to do it again if it falls off. I followed the link you had and the procedure but was very glad for your video to make it even more clear what to do. I’m actually kind of satisfied…it at least looks and seems solid. And nicely shaped from ferrule to tip. Looks great. I let the super glue dry/cure for about 20 minutes before doing the rest of the procedure. I am waiting to shape the tip until at least 24 hrs, just to get best chance for totally cured. Had used the table method to keep pressure on the tip. Thanks! It at least LOOKS way more professional/solid than the cues at the local pool hall.
i notice you put the triangle Tip?, its a hard single layer tip type (i think is the best tip for the money) is there a big difference between pool cue and snooker cues using a single layer tip cause most of pool players use laminated tips like kamui etc.
This was the first time I tried replacing tips, and I was being very careful, so it took me a long time. I think after practice, the whole process could be done in 20-30 minutes. Concerning caring for the tip, see the video and info here: billiards.colostate.edu/faq/cue-tip/care/
Hi there Dr.DaveBilliards!I'm trying the methods that you've shown.I tried to put my tip without the glue first just to make sure if it's perfectly leveled.sadly,it's not.what do you is the problem?is it the ferrule or the tip?by the way,great video.very helpful and more detailed.😊👍
It could be either, but I would guess the ferrule, assuming you sanded the back of the tip as I demonstrated. FYI, much more detail is available in the document here: billiards.colostate.edu/faq/cue-tip/replacing/
@@DrDaveBilliards Thank you very much for your help Sir.I guess I'll just do it again.I just can't get my ferrule perfectly flat.glad to bumped on your channel.you gotta new subscriber.stay safe.😊👌
Obviously, it is much easier to keep the ferrule flat if you use a lathe, but some other ideas can be found in the comments and quotes here: billiards.colostate.edu/faq/cue-tip/replacing/
Dr. Dave, greetings one question, my tip needs to be replaced but the top of the ferrule is a bit bruised, can i cut the top of the ferule and then put the tip on, does that sound safe, the cue is cheap so the risk is not too big
thanks for the reply, I have a cheap tip, and I sanded the ferrule and it looks better now, but I'm not sure if it's really round at the top, that's why I was thinking of breaking off a part if that's possible? If I sand it more, I don't know, I'm afraid not to thin it to. or maybe to buy better tip, soft one, sorry for bothering, and sorry for my english
@@perun4649 As long as the ferrule is not cracked, it is okay if it isn't perfectly round, but you could sand the flat end of the ferrule down some more if you wish.
Probably the best way for most people is to pay a cue technician to do it for you. Concerning how often to replace, see the answer to the 2nd-to-last question near the bottom of the page here: billiards.colostate.edu/faq/cue-tip/replacing/
*Table of Contents:*
- Intro [0:00]
1 - Remove Old Tip [0:35]
2 - Scrape Ferrule [1:08]
3 - Prepare Tip and Ferrule [2:02]
4 - Tape Ferrule [2:30]
5 - Glue New Tip On [2:55]
6 - Remove Tape [3:44]
7 - Trim Tip [4:04]
8 - Sand Tip [4:40]
9 - Clean Up Tip and Ferrule [6:16]
10 - Shape and Chalk Tip [7:10]
- Wrap Up [7:43]
---- process montage [8:20]
*Supporting Resources:*
- detailed 10-Step Cue Tip Replace Procedure document: billiards.colostate.edu/resource_files/cue-tip_replace_handout.pdf
- cue tip replace resource page with other videos: billiards.colostate.edu/faq/cue-tip/replacing/
- Efren “The GOAT is my Hero” T-shirt: drdavebilliardtshirts.com/product-category/humor/goat-hero/
I use painters tape to keep super glue off ferrule.
@@TimZ007 Nothing wrong with that. I just wanted to stick with one type of tape for the whole process.
I know this is off topic, (thank you for the cue tip know how!!❤❤) but the Blue Pool Table you use in your videos, aka your 57 ball run out (impressive by the way 👏) blue pool table. What are the dimensions of that? Is it 8x4 or 7x3.5 or 6x3? And what kind of Felt are you running on it? I'm just very curious. Thank you DrDaveBilliards :)
@@KlutchKidTM I don't know for sure but I think it's a 9-foot table. They're always half the width of the length I think. Usually the playing surface on a 9-foot table is 100 inches playong surface. Most likely it's simonus that's usually what everybody runs but you could be champion or Andy cloth hi imagine it's one of those three
@@TimZ007 right. I knew about the width always being half of the length. I was just wondering what his set up is. Thank you though, @Tim Z
As a filipino pool player this practice is basicaly mandatory because lathes aren’t always available and l’m always thankful that there are tutorials like this.
Yep. I am not Filipino, but I play a lot of pool in the Philippines and this method is almost exactly how I change my tips in the Philippines. Once you do it like this a few times, it is quick and very easy.
👍
I'm a guy in the US, and would rather do things myself than pay for someone else to do it, simply for the aspect of learning how to do it.
I love pool and working with my hands, so why not?
I'm glad you covered this. I've done it before but the tips never lasted. This was much more detailed and had a few step where I went wrong in the past.
The tip and the glue matter. I ran two pool rooms for years. We had a handy all-in-one tool that I wish I still had that put tips on. But, one thing we found through 1000's of tips was the glue. We ended up liking Loctite Gel Super Glue. It does not dry completely brittle and has some give to it and allows the tips to stay on for a long time.
I had to go look for that old piece. It was called a Willard Tipping Machine. I really enjoyed putting tips on with that. Had to be careful, you could mess a ferrule up.
Always a great video with this channel. I especially liked the sandpaper and block of wood guide. Very helpful.
I'm glad you liked it.
This is kind of perfect for the pandemic. I hadn’t considered the paper masking technique before. Sanding tries & rewards patience.
Great video very well structured. Clear and through. Thanks for making it.
Thank you. I'm glad you liked it. You're welcome.
Dr. Dave. This video saved my stick. I bought all the usual tools online; they just dug in and ruined tips. Other than the cue top sander, everything else failed. I used your process and now have a perfectly installed tip! Excellent video! I used 80 and 120 grit then switched to 1000, 2000, then 00 steel wool to finish the job. Thanks!
I'm glad the video helped. Cool.
Very relaxing to watch this. I'm worried I won't have the patience for this, but this is still invaluable info. Thanks again, Dr. Dave!
It does take patience and care to do a good job. You're welcome. I'm glad you liked it (and even found it relaxing).
I definitely a do-it-yourselfer and this is a good how-to video. Thank you!!
You're welcome. I hope it helps you "do it yourself" well.
Dr Dave, best doctor ever 👍
Thanks. I aim to swerve. :)
I did my first tip install yesterday. Followed the video to a T. Cane out beautiful. Thanks once again! I will order larger diameter for my next que. It was tough trying to center the tip after gluing. I had no room for error. My que was 12.99mm and tip was 13.01. having a larger tip size will be easier to install. Excellent video
I'm glad to hear it. I'm glad the video was helpful. A larger tip takes a little more sanding, but it is much safer.
Unbelievably smooth tip operation - it actually is Rocket science... Congratulations on this tremendously successful "installation".
Thanks. Changing a tip might seem simple, but every step requires a fair amount of care.
Just got some new tips for Christmas...video came @ the right time!
Awesome. Get to work when you are in a patient mood.
As always, great video. I am going to be doing this for others, now. I bought those ball bearing roller sets on Amazon. You'll see them for about $20. I believe it will make the process even easier. I'm also going to be fabricating a tool for the tip tool that allows for cordless drill use. I suppose eventually I'll graduate into a lathe attachment to turn my corded drill into a lathe or the bench to grinder, that I've seen on UA-cam quite a bit. Very rewarding and relaxing hobby.
I’m glad you enjoy your hobby. It is satisfying to do your own craftsmanship at times.
This guy does a really good job. Looks professionally done. 👌
Thanks.
Used the info today when replacing a tip for the first time. Thanks!
I hope it helped. How was the final result?
as always, a great video. thanks dave
@@mattmoss235 I’m glad you think so. Thanks!
Thank you! I used this method to install a Tiger Everest tip on my old Lucasi 612 and I was very pleased with the results.
I'm glad to hear you found the video helpful and had success.
An additional thing I like to do is to "set the chalk." Basically once you chalk up, use one of the rasp like tools to roll on the tip and embed chalk into the tip, then rechalk and it's ready for play. This is especially important on hard tips. There are tools made just for this, but often the flat scuffer part of tip tools will do the same thing, or you can use a fine rasp.
Thank you for the suggestion. I just chalk frequently during initial practice with the new tip. That seems to do the trick.
Excellent video and tips. This is very close to how I have changed many tips for years with great success. Never have I had a tip fail and never had I had to pay someone else. Your method is fairly detailed and if someone just takes some time it is pretty hard to mess this up.
Thanks. There are some things that can be messed up.
For examples you can easily damage the ferrule during the shaving/scraping/sanding or by sanding the tip down to diameter with too much pressure or with cover paper too thin. But I agree that with a little care and experience, the procedure is reliable.
perfect technique perfectly demonstrated thanks again Dr. Dave
Thank you, and you're welcome.
This is buy far the best tutorial. Thanks so much for this wonderful lesson😊
I'm glad you think so. Thanks.
Dr. Dave thank you for the video. I don't comment on a lot of your stuff . but you help me in many many ways. If I would have seen this video a couple weeks ago I would have saved a lot of dollars thank you very much for you and your time sir
You're welcome. I'm glad you like my stuff.
Excellent Video. The last tip I changed on my Viking kept falling off after a few days. Finally stayed on after a heavy dose of superglue, and has been there for a couple of years (during pandemic). Now I have a new Kamui soft tip to apply, and I'll follow all of your great tips, I'm sure it will turn out well. Thanks Dr. Dave!
I hope the procedure in the video helps.
Excellent and easy-to-follow video. Thanks Dr. Dave as always!
Thanks, and you're welcome. I'm glad you liked it.
Extremely hard doing it by hand. Not too many people understand how difficult it actually is. Great job 👏 💯
Agreed. Thank you.
I watched several of these videos and yours IMO is the best. Thank you.
Thank you, and you're welcome. I aim to swerve. :)
ive used info in this video to repair mushrooming of the tip ... thanks for the great resource dr dave!
I'm glad to hear it. You're welcome.
I was given an older McDermott cue and the tip was dry rotting (crumbling when I shaped the tip). I followed these instructions and it came out beautiful. I break with this cue and have had no problems what so ever in the last 3 months I've used it. Great advice. Thanks
I'm glad to hear it. You're welcome.
I always heard people say to score the feral and back of the new tip to help the glue settle. Also the glue you get is very important.
I don't think scoring is necessary or even helpful. Sanding is better to create uniform and easy-to-bond surfaces.
@@DrDaveBilliards 💯
I've never seen that sanding with the block of wood before, cool idea
Great video. I have 4 tips to replace and now I'm thinking I'll do it myself.
Thanks. Be prepared to be patient and careful.
@@DrDaveBilliards Haha. That's actually something I have plenty of. What I didn't have was the technique. I will be using yours over others I've viewed on UA-cam! It's clearly sound if you're malicious! I'll let you know on here how it goes.
@@justinr4201 Good luck, and have fun.
Awesome! Great shirt as well!
Thanks. FYI, the shirt along with many other designs is available here:
drdavebilliardtshirts.com/
Was able to follow step by step only thing I would warn people against is when you cut the old tip off and start shaving the ferrule be careful to not shave off any of the ferrule. I had to do some sanding work to get it as flat as possible when I did that by accident. All in all great video
Excellent point.
Thank you Dr.Dave. This is awesome
You're welcome. I'm glad you found it helpful.
I just changed the tip using your method and I think it came out quite well. Going to try it next week but I'm pretty satisfied with it :)
I'm going to get a tip-shaper tho. Doing it with sandpaper was just a bit too tricky and time consuming because it came out a bit uneven and flat on the top first and had to try to reshape it.
I'm glad the video helped.
Planning on getting some new How tips and planning to watch this again while installing them.
Good luck, and have fun!
@@DrDaveBilliards Forgot about this comment, but yea i installed my tip myself and it went out really well and it took me around 3.5 hrs to get the tip (How Medium Tip) the way i liked. This helped a lot! Thanks DrDave!
@@lucasgb_v I'm glad to hear it. You're welcome. I aim to swerve. :)
Thank's for the video! Greetings from the Netherlands
You’re welcome from the USA.
Watching this I have known installed several tips successfully no duds yet 😁
Did you watch me sometime in the last 30 years? That's about how long I've used (almost) this exact method.
I curl sandpaper to trim the sides of the new tip, with one layer of tape around the ferrule.
I like your tape idea to increase the diameter as a sort of jig to help center the tip. I will try this next time. I find it is a lot easier to dress the tip if it is properly centered so that the factory crown lines up, then final shaping is much easier to accomplish than when the tip is off center and you have to remove material from one side of the crown to recenter it.
Good point about shaping being tougher if an existing crown is off center.
The tape will also protect the ferrule from glue, right?
Great method! Widening the shaft with tape is a great idea. I've put a few tips on off-center. The edge sanding method is good too
Thanks. I'm glad you picked up some new ideas.
I'm going to use the edge sanding technique on other things. I've never thought of putting paper and a block as a guide. Very slick idea.
A collapsable small silicon funnel, cut the narrow end so its just wide enough to be snug fit over the ferrule. Wide end facing away from the cue, then press the new tip into the funnel. Perfect centre everytime.
Thanks for the "tip."
Thank you, I am going to use this method for my first tip replacement.
I hope it goes well.
Excellent video as usual.
Thank you. This one was fun to do (after I got over the initial frustration in learning a new skill that takes lots of patience and care).
Good lesson 👍
I'm glad you think so. The process isn't easy, but it works well if you are careful and patient.
Thanks Dave and Bob. I scratched up a ferrule on my snooker cue before. That paper over sandpaper method would’ve helped. Got 2 more cues to do, I’ll have to remember patience.
If the paper isn't thick enough (or doubled up), or if you push too hard, you can scratch the ferrule with this technique also. Patience is a virtue.
Thanks Dr Dave!
You’re welcome.
Thank you for the detailed step by step procedure. A lot of work goes into this! Much appreciation for the cue tip mechanics:)
My new shirt order is on its way! As promised!
You're welcome. I'm glad you continue to enjoy the shirts. I look forward to seeing one in a future video. I just got an "Efren - I Got Lucky" shirt to wear in one of my future videos.
@@DrDaveBilliards i was going to order that shirt as well however i was eeire about the order being shipped from elsewhere... i look forward to all your videos. Taks care for now Dr. Dave.
Well, I watched, I took my time. The results Im quite pleased with!Thanks for your video, with your help I put on a brand new BULLETPROOF tip. This was my first attempt at this. Again Im quite pleased. Thank you!
I would love to upload a pic! Unfortunately im not so good with tech.
I'm glad to hear it. A pic would be cool to see, but I'll take your word for it that your job was good.
THANK YOU, Dr. Dave for this video. Patience is definitely key, but I’ve been a machinist for over 30 years, so I have that. Hahahaha
That's one of the best virtues of a good machinist ... patience.
Dr Dave for president
... president of the Cue Tip Changers of America?
@@DrDaveBilliards President of The Universe! Would you recommend this approach for the Kamui clear tips with a plastic bit on? Their instructional vid (ua-cam.com/video/Dh8w7W7xPms/v-deo.html) uses a couple of different knives which look really cool but I'd rather keep the £50-60
This approach works for all tip types and brands; although, the Kamui video is a good approach also.
@@DrDaveBilliards Aces, thanks again Dr. Dave :)
some really good ideas here to make doing this much easier. thank you.
You're welcome. Honestly, I still prefer having a good "tip guy" do it for me, but it is nice to have a back-up plan in case a good "tip guy" isn't readily available.
phenomenal video!
Thanks!
This is the best tutorial I could find on the internet so good job. I still suck at it so I’ll have a professional do it next time, lol. But still good job with the video.
Thanks! The procedure isn't easy and takes a lot of care and patience. I agree with you that it is much easier just going to a good cue guy.
Great video Dr Dave. As a top fitter myself I would like to offer a few suggestions.
Try using a very sharp blade or a scalpel to get the tip flush with the ferrule.
That way u wouldn’t have to sand the edges too much. Secondly u should NEVER sand the ferrule.
Thank you for adding your advice.
Excellent video, thanks so much doc.
Please advise as to what type of sandpaper to be using (grit)
All details (including sandpaper info) can be found here:
billiards.colostate.edu/resource_files/cue-tip_replace_handout.pdf
Thanks Dave. Really useful video.
You're welcome. I'm glad you think so.
Great job Doc
Thanks!
Thank you so much dr dave.
You’re welcome. I aim to a swerve. :)
Love Dr Dave! Happy new year and thanks for the vid
Thank you, and you’re welcome. Happy New Year!
That's probably a better method than what I did pressing down with my finger, sanding the ferrule and the tip at the same time with 220, turns into 320 when the 220 is used, maybe I'll finish it off with the 2000 grit I have and water the edge like that. If my tip comes off again I think I can do a better job than my current one after watching this, thanks.
I'm glad you found it helpful. You're welcome.
Great video! I love the tape idea. I use blue painters tape as it seems to be easier to remove.
Thanks! And great "tip" with the painters tape.
Happy New Year Dr. Dave, I hope I can get playing Cue from you!!
Thank you. 2021 is guaranteed to be happier than 2020.
i really needed this😂❤️+thank you
You're welcome. I aim to swerve. :)
Woooow that's probably the only yt movie which can help everybody who will watch it
I'm glad you think so.
Super handy video. I've been Looking at cues on ebay. Often times they don't come with a tip. Have you tried painter's tape ? It may be easier to remove.
I'm glad you like the video. Painter's tape is a good idea. Scott Magic tape is nice and slick and I think it provides better protection, but I'm not sure.
Thank you Dave!! Cue tip broke off and your video helped me re tip my cue! One question, if my tip begins to wear, can I keep sanding it down?
FYI, I have a video and info dealing with how to care for your tip here:
billiards.colostate.edu/faq/cue-tip/care/
Check it out.
@@DrDaveBilliards thanks so much! Will do!!
I was just about to order 13mm..thanks for that.
You're welcome.
Helpful. Thank you.
You’re welcome.
Awesome video. Replacing a cue tip can be a daunting task for the uninitiated. I have replaced my own, as well as friends, for many years. Tweeten makes a decent cue tip tool kit that is fairly cheap. However, I will refer this video to anyone who wants to try it for themselves for the first time.
Do you prefer the liquid or gel-type CA glue?
Thanks. I'm glad you think it is good enough to share. I prefer gel CA glue.
@@DrDaveBilliards I understand, but do you prefer CA gel or CA liquid?
CA gel (see the end of my previous post).
I keep my Milwaukee pocket knife 6 in 1 that is a utility knife glue and sandpaper in my bag for this I even have rubber bands to hold the tip on as I seen that is what McDermott does for their method
I have a “cue guy” replace my tips whenever possible, but it is helpful to be able to DIY it when necessary. Good idea with the multi-tool knife.
Can you do a similar one for Revo shafts?? Also what kind of glue do you use?
@@IndianHeathen1982 The process is the same for a Revo. You just need to be even more careful. All procedure and supplies details can be found here:
billiards.colostate.edu/faq/cue-tip/replacing/
especially in the document linked at the top. Glue advice can be found at the bottom.
NICE! I've been replacing my own tips for many years and of course bought all the 'special' tools, this sure would have been cheaper! (great process!) The superglue GEL is the most important part. It's the only thing I've found that works well consistently.
I'm glad you like it. Good point about the gel. It does work best.
Good to see 0 dislikes on the video
Just give it time. The haters will surface sooner or later.
Yup
Thank u for the video. What is the tip 's material made of? I have a cue stick but it doesn't seem to hold chalk. I will have to replace it with the authentic material.
Most tips (including the ones in this video) are leather.
Thank you for the video. Where can I get the tips though?
… at a billiard supply store or online.
A great guide
I will follow ur steps
At step 9 Did you use water to shine the tip ?😅
Wetting the sides of the tip helps the burnishing process, making the sides harder and shinier.
Thanks a lot for the video.
You're welcome. I aim to swerve. :)
Have you tried 2 part mitre glue? Sets in seconds and stronger.
I have not. Thanks for the "tip."
@@DrDaveBilliards 😂 you're welcome
Could you please share the details about the sand paper so I can buy the same exact ones? Thanks in advance Dr Dave!
Alll details are in the document linked here:
billiards.colostate.edu/faq/cue-tip/replacing/
Gotcha, thanks!!
@@jggrskate94 You’re welcome. I aim to swerve. :)
Is there a way to prepare vegetable tanned leather to make cue tips?
Sorry, but I don’t know.
Do you change your own cue tips on your revo shaft too or you get a professional?
I would if I had the patience, but I just have my "cue guy" do it.
Wondering if there's a video for maintenance/taking care of your cue as well. Either way, thanks for the video!
The only maintenance I recommend is wiping down with a damp rag or paper towel periodically. Carbon fiber shafts are really low maintenance. See:
billiards.colostate.edu/faq/cue/carbon/
@@DrDaveBilliards Thanks for the advice and appreciate the reply
Hello! Please specify the sandpapers types in sequence of use. Thank you!
I show the grit numbers in the video. I also have all details specified here:
billiards.colostate.edu/resource_files/cue-tip_replace_handout.pdf
@@DrDaveBilliards Thank you so much!
Hi Dave, Is that nomal Super glue then? gel? Can you use Loctite x eg?
FYI, all details are here:
billiards.colostate.edu/resource_files/cue-tip_replace_handout.pdf
I used Super Glue Gel, but any Super Glue or Loctite should be fine.
Cheers mate@@DrDaveBilliards
I posted a comment about this video a year ago saying this method is very close to how I have changed tips for many years. I stand by that, but want to add one more thing: don't fall for these guys that want to charge you a bunch of money to replace tips!
It is actually VERY easy if you just follow what Dr. Dave showed in this video. Don't be afraid to change your own tips. Also, carry a little tip changing kit with you. Three days ago I broke a tip while playing. I missed a shot, and in frustration sorta jumped up and accidentally hit the tip of the cue on a wood frame. The tip came off.
This tip had last me two years and a lot of hitting the cue ball. It didn't come off because it was put on poorly, it came off because the wood frame it hit, hit it perfectly and knocked it off. Any tip would have came off after being hit that hard, at that angle.
Thankfully I had a little tip changing kid with me. A tip, a sharp knife, some sandpaper, some glue, and a tip shapener. Within 15 minutes, literally 15 minutes, I was back playing with the new tip on my cue and the tip performed just fine. If I can do it, so can anyone else.
It truly is not that difficult.
Hello, Dr Dave, if the shaft is a little curve, how to make it straight? Thanks.
Sorry, but I don't have any experience with this. Warping is not an issue with carbon fiber shafts:
billiards.colostate.edu/faq/cue/carbon/
Hi Dr.Dave, thanks for the video! I used to replace tips myself when I was using a wood shaft. Not sure how those steps can transfer to replacing tips on a CF shaft.
The steps are no different; although you should be even more careful. Those CF shafts can be expensive.
@@DrDaveBilliards Hi Dr.Dave, thanks for replying. I ask mainly because a lot of the CF shafts have a soft silencer pad between the tip and the actual shaft/ferrule. I am afraid that the "tip scraping" step would damage that pad.
@@shuchengchao That's where the extra care is required.
You da man! Great video
Thanks.
I really wish I hadn't just taken my tip off my first cue. I didn't realise so much was involved in getting a new tip on... Thanks for a great instructional vid tho😊
You’re welcome. It does take a lot of care and patience to do a good job.
What kind glue are you using in the Video? Do you have link on Amazon for this glue? TY
It is Super Glue gel. You should be able to find it on Amazon. FYI, details like this (and more info and advice) can be found in the document linked here:
billiards.colostate.edu/faq/cue-tip/replacing/
What grit sandpaper are you using to sand down the old tip?
Also, what type of glue is best to use?
@@shader26 FYI, all detailed info like this can be found in the document linked in the video description and pinned comment. Here it is:
billiards.colostate.edu/resource_files/cue-tip_replace_handout.pdf
@@DrDaveBilliards ok! Thank you! Great video!
@@shader26 You're welcome, and thank you! FYI, more info and advice (from me and others) can be found here:
billiards.colostate.edu/faq/cue-tip/replacing/
@@DrDaveBilliards That worst part of the job for me was getting the tape off the ferrule! That was a little frustrating. Also, and I know this was maybe dumb, but it was a Sunday and where I live there are no hardware stores open on Sunday, all I had was super glue, not the super glue gel. I hope it works but am prepared to do it again if it falls off. I followed the link you had and the procedure but was very glad for your video to make it even more clear what to do. I’m actually kind of satisfied…it at least looks and seems solid. And nicely shaped from ferrule to tip. Looks great.
I let the super glue dry/cure for about 20 minutes before doing the rest of the procedure. I am waiting to shape the tip until at least 24 hrs, just to get best chance for totally cured. Had used the table method to keep pressure on the tip. Thanks! It at least LOOKS way more professional/solid than the cues at the local pool hall.
i notice you put the triangle Tip?, its a hard single layer tip type (i think is the best tip for the money) is there a big difference between pool cue and snooker cues using a single layer tip cause most of pool players use laminated tips like kamui etc.
I honestly don’t think it matters much. A good player can play well with any tip, assuming it holds chalk.
I prefer a harder tip for the reasons here:
billiards.colostate.edu/faq/cue-tip/hardness/
How much time could the tip be installed? Supose you use it less..
And what do you recommend for adjust it after playing for a certain time?
This was the first time I tried replacing tips, and I was being very careful, so it took me a long time. I think after practice, the whole process could be done in 20-30 minutes. Concerning caring for the tip, see the video and info here:
billiards.colostate.edu/faq/cue-tip/care/
Hi there Dr.DaveBilliards!I'm trying the methods that you've shown.I tried to put my tip without the glue first just to make sure if it's perfectly leveled.sadly,it's not.what do you is the problem?is it the ferrule or the tip?by the way,great video.very helpful and more detailed.😊👍
It could be either, but I would guess the ferrule, assuming you sanded the back of the tip as I demonstrated. FYI, much more detail is available in the document here:
billiards.colostate.edu/faq/cue-tip/replacing/
@@DrDaveBilliards Thank you very much for your help Sir.I guess I'll just do it again.I just can't get my ferrule perfectly flat.glad to bumped on your channel.you gotta new subscriber.stay safe.😊👌
You're welcome. I aim to swerve. :)
Obviously, it is much easier to keep the ferrule flat if you use a lathe, but some other ideas can be found in the comments and quotes here:
billiards.colostate.edu/faq/cue-tip/replacing/
Could be possible to apply sand paper ta a kamui clear m? I mean the silicon layer can be adjust to the size?
I don't know for sure because I haven't tried it.
Thanks BOB!
Amen to that!
Dr. Dave, greetings
one question, my tip needs to be replaced but the top of the ferrule is a bit bruised, can i cut the top of the ferule and then put the tip on, does that sound safe, the cue is cheap so the risk is not too big
Sanding it down is probably a safer option. Otherwise, this is fine.
thanks for the reply, I have a cheap tip, and I sanded the ferrule and it looks better now, but I'm not sure if it's really round at the top, that's why I was thinking of breaking off a part if that's possible? If I sand it more, I don't know, I'm afraid not to thin it to. or maybe to buy better tip, soft one, sorry for bothering, and sorry for my english
@@perun4649 As long as the ferrule is not cracked, it is okay if it isn't perfectly round, but you could sand the flat end of the ferrule down some more if you wish.
@@DrDaveBilliards thanks doc. dave, your the best!
@@perun4649 You're welcome. I aim to swerve. :)
Good gripes that’s a lot of work. Is there no other way? How long do tips last? Ty.
Probably the best way for most people is to pay a cue technician to do it for you. Concerning how often to replace, see the answer to the 2nd-to-last question near the bottom of the page here: billiards.colostate.edu/faq/cue-tip/replacing/
@@DrDaveBilliards awesome. Thanks 👍🏻