How to Replace High Pressure Fuel Pump 2011-2014 Hyundai Sonata
Вставка
- Опубліковано 14 жов 2024
- Buy Now!
New High Pressure Fuel Pump from 1AAuto.com 1aau.to/ia/1AFP...
This video shows you how to install a fuel pump on your 2011-2014 Hyundai Sonata. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.
This repair was done on a 2013 Hyundai Sonata GLS 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata
Tools you will need:
• 10mm Wrench 1aau.to/o7X/1AX...
• 19mm Wrench 1aau.to/o7X/1AX...
• 10mm Socket 1aau.to/obwZ/1A...
• 12mm Socket 1aau.to/obTJ/1A...
• Trim Tool Set 1aau.to/oapN/1A...
• 1/2 Inch Ratchet 1aau.to/oawS/1A...
• 1/4 Inch Ratchet 1aau.to/obwZ/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obTJ/1A...
• Torque Wrench 1aau.to/oaZr/1A...
• Gloves 1aau.to/oaJL/1A...
• Safety Glasses
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Easy, thanks for the video
I heard that the 2 bolts for the pump as well as the hard fuel line should also be replaced. I see you did not do this. Is it necessary to replace them?
Good info thanks 🎉
You’re supposed to replace that hard fuel line too and there’s a recall on the inline fuel line too.
How do you get torque from an open ended wrench
I did all these steps and now my car stalls out and has rough idle, anyone have any ideas?
You completely missed a step that is vital to the replacement. You should have removed the cam roller under it and inspected it and cleaned it
no gasket
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money