I would highly advise against hanging a controller by the sticks. The analog sticks are not designed to support the weight of the entire controller, and doing so could potentially cause damage.
You're right, axial load is better then sideways, but thats beside the point. Prolonged stress can still wear down the internal components and affect calibration. While these things might seem convenient at first, it‘s generally not advisable to promote such designs…
@@Jan_Eberhart Not at all. All this does is raise the plastic off of the actual analog piece underneath a little bit. There's no wear and tear on the actual analog stick.
Yup, I've repaired more controllers than I can think. hanging it from the sticks will eventually cause problems. Not necessarily with the axis but could break the actual sticks and clickers inside. it will likely ruin the thumb caps too, you would be better printing a fully supported mount
I was searching for this comment, if this man doesnt stop doing things like this to his controllers they will fall ill with a case of stick drift, i am very close to an experience as i lost an oculus controller, he had stage 4 stick drift, and died (i slammed him into a wall on accident) truly tragic, bring more awareness to stick drift and help fund… some WD-40
Wouldn’t it be better if that trash can was just something like a ring that holds a plastic bag or something that you can just chuck with the garbage? 🤔 I imagine it’s gone be hard to get things like cans out of that small hole 😅
It makes me think of one of the Mario Party mini games. The one where you have a jar full of gems and you have to shake the controller to get them out.
Know all what you see takes time and many Copy files from other there are less creative For most things you pay to print more as things to buy from dollar store and so one.. forget not many tools you need to finish the prints in the end 😂
If you want an expensive hobby, sure. If you imagine that it will save money or improve productivity, forget it. It's a toy! Unless that is, if you have a legit business need for rapid physical prototyping. Of course, we both that know that you don't...
What to check the performance quality of your heart? Then the Xbox1 elite controller toggle holders/ blood pressure spiker is just the accessory you've been looking for. Safely stores your controller on the floor underneath your desk. While making a loud bang and breaking noise so you know that it has been stored properly. Long-term use gives your controller a vintage worn out look and performance. 🙃
get a trashcan ❌ drill a hole in ur table, 3d print and put together multiple parts to make a inconvenient door and a can that is just big enough to throw stuff in but just small enough for you to have to empty it all the time ✅
Amazing work, man! Keep it up. I'm wasting 1h per day trying to find a cable management object to hide my "on the table" cables and still keep them removable without being a nightmare.
It's wild how desks used to have drawers and now we buying them without drawers and build drawers to attach to them. Absolutely wild. What will we accomplish next?
You should make the controller so you can still play with it while its under the table attach something ti the back or something. I think that would be fire🔥
Ya know. If you just put a normal trash can on the floor, it would hold more. And you wouldn't have to crawl under your desk and unscrew it when you empty it!
Controller holder that damages the sticks, trash can that requires drilling a huge hole, small capacity and is in itself trash. Last but not least a tiny drawer. Just what the world needed
Where's the 3d model?! I NEED THAT!
thangs.com/forgecore
@sleepdeprivedcactus it's probably because he spends hours/ a while to make them so he needs compensation
Where can I buy these without having to get a subscription?
@GREG_YT23 I guess, but a lot of 3d artists spend hours making models and put then up for free. This guy already has a successful UA-cam channel
@@sleepdeprivedcactus i mean its his choice just because someone buys me something i dont expect them to always do that
I would highly advise against hanging a controller by the sticks. The analog sticks are not designed to support the weight of the entire controller, and doing so could potentially cause damage.
Its an axial load, the sticks are plenty strong axially. If the force was sideways that’d be bad for stick drift
You're right, axial load is better then sideways, but thats beside the point.
Prolonged stress can still wear down the internal components and affect calibration.
While these things might seem convenient at first, it‘s generally not advisable to promote such designs…
@@Jan_Eberhart Not at all. All this does is raise the plastic off of the actual analog piece underneath a little bit. There's no wear and tear on the actual analog stick.
Yup, I've repaired more controllers than I can think. hanging it from the sticks will eventually cause problems. Not necessarily with the axis but could break the actual sticks and clickers inside. it will likely ruin the thumb caps too, you would be better printing a fully supported mount
It doesn’t work with Xbox elite controllers either. But either way it could cause stick drift fairly fast
Hanging controller.
Pros: keeps controller safe
Cons: stick drift +1000
Not safe from me. I'd end up smacking my knees on it every time I turn my chair.
Cons it’s probably going to break
Usually these nitpicks I would hate but this one is tru fuck that controller holder fr 😂
I was searching for this comment, if this man doesnt stop doing things like this to his controllers they will fall ill with a case of stick drift, i am very close to an experience as i lost an oculus controller, he had stage 4 stick drift, and died (i slammed him into a wall on accident) truly tragic, bring more awareness to stick drift and help fund… some WD-40
And it’s a PlayStation exclusive
Man’s stick drift is going to be through the roof
MY HEART FUCKING STOPPED WHEN HE HUNG THE CONTROLER BY THE STICKS AHHH DONT DO DAT
It's not that deep bro
IT IS THAT DEEP. Doing such a thing could cause damage to the controller!!!
No swearing!
@BoxyOSC695 CHILD.
@@Pwnz0rServer2009 Am not.
That controller one hurt my entire gaming bloodline
Causes drift
me too😢
Fr that was a HANGING for our boy 😭
I'm not even a hardcore gamer, and I physically recoiled at the way the controller was hung.
That is the worst controller holder ever. Finally, a way to give my controller stick drift without playing it
My detachable magnetic joysticks 😢😢😢
😢 same I have is 😢
Nice
Me with the Xbox elite controller that also has the mangetic hot swappable joysticks
It’s alright, that would work the joysticks every time you used it anyway, leading to stick drift even more quickly.
Xbox Elite Series 2 user? (I used to be one until mine broke, now I use the Series X controller)
I saw a similar one in Unnecessary Inventions for the first one!!
He says in the description that it was inspired by his!
Every single 3D printer video is making dumb plastic crap. I've seen 100s of them and seen something useful twice.
It is quite literally the exact same thing
Him : Part one! 😁
Subtitles : Part 3💀💀
@@Fawn_Taming this is what low effort content looks like, all the designs are stolen too
Ye :/
I could not sleep knowing my controller is being held like that
Mom I’m famous lol
stick drift just waiting to happen
@@Mr_meme-u stick drift wouldn’t occur like that
@@ErikaCalvoVargas You bet. Those sticks are not in 0 position in this case so you will get stickdrift.
@@ErikaCalvoVargaswrong.
@@ErikaCalvoVargasyou have absolutely no idea what you are talking about
Wouldn’t it be better if that trash can was just something like a ring that holds a plastic bag or something that you can just chuck with the garbage? 🤔 I imagine it’s gone be hard to get things like cans out of that small hole 😅
It makes me think of one of the Mario Party mini games. The one where you have a jar full of gems and you have to shake the controller to get them out.
@@nialelkhatib4226 yeah kind of 😂 it doesn’t look bad just impractical 😊
@@MissisSheDevil it is a replica of a thing made by "unnecessaryinventions" on UA-cam, he makes a lot of useless stuff for fun
Hanging the controller from the joysticks is next level cursed
That controller gon drift more than a dusty Nintendo switch joycon
I’m pretty sure that trash can was one of unnecessary invention’s pieces for his puzzle table
Bros controllers bout to get stick drift😂
We getting free stickdrift with this one 🗿🗿🗿
Not even free considering you need to 1) have a 3D printer 2) waste filament and electricity printing the thing
The trash can is genius 😂 I don't keep a trash can next to my desk because it looks ugly, but this idea awesome!
You have to drill a hole through the fucking desk to do it
@@disastercal1No you don't. It just goes into the cable hole that a lot of desks have
@@VaultClownbut that’s what you run the cables through!
@@disastercal1 I've never seen a single person actually do that 🤷
@@disastercal1 I've seen a lot of desks with one on both sides
that first one looks like its perfect for incinerating certain cube shaped objects with hearts on them
We're drifting the joystick with this one 🗣️ 🔥
I dont need a 3d printer. I dont need a 3d printer... I need a 3d printer now
Know all what you see takes time and many
Copy files from other there are less creative
For most things you pay to print more as things to buy from dollar store and so one.. forget not many tools you need to finish the prints in the end 😂
If you want an expensive hobby, sure. If you imagine that it will save money or improve productivity, forget it. It's a toy! Unless that is, if you have a legit business need for rapid physical prototyping. Of course, we both that know that you don't...
Is nobody gonna talk about how that can legit despawned?💀
I didn't even see it until you said something wtf 💀
storing the phone: 😍
trying to get the phone out: 💀
That controller holder will definitely give your controllers stick drift. Just warning y’all
now make the first one, but the other way around so you can get a beer can when you open it
Look closely at the bottom of the screen. The second can respawn right quick 😂
My fidgety legs won't let this thing be under my desk
Puts phone in drawer *ding!* ugh opens drawer
Bro there's no grip to grab the phone just fits perfectly
Dude if you have to hide any game addiction from your partner then you need a new partner
Had us in the first half lmao
My knees are taking out every single one of these 😭
My thoughts exactly lmao
Bros expiditing stick drift with the last one 😂
immediant thought for the first one was "unneccesaryinventions"
Help I thought the beginning was edited 😭😭
Omg that controller hanger has to be a troll
Did uselessinventions make the garbage
Yeah
What to check the performance quality of your heart? Then the Xbox1 elite controller toggle holders/ blood pressure spiker is just the accessory you've been looking for.
Safely stores your controller on the floor underneath your desk. While making a loud bang and breaking noise so you know that it has been stored properly.
Long-term use gives your controller a vintage worn out look and performance. 🙃
Man, you are doing incredible thing! Bravo 👏
I’m literally so obsessed with this channel 😭 the creativity is on point
"how many times per day do you kick your trash can down?"
"all of them"
plot twist: magnetic joysticks
get a trashcan ❌ drill a hole in ur table, 3d print and put together multiple parts to make a inconvenient door and a can that is just big enough to throw stuff in but just small enough for you to have to empty it all the time ✅
Me: “desk nuts trash can.”
Amazing work, man! Keep it up.
I'm wasting 1h per day trying to find a cable management object to hide my "on the table" cables and still keep them removable without being a nightmare.
finally, a portable toilet on my gaming desk.
Unnecessary inventions but you’re making them look useful
"How to get broke and broke your ps controller within few months" seems like a good alt title.
I need these.
WHY IS NOBODY TALKING ABOUT THE FACT THAT THIS VIDEO INCREASES YOUR PHONE BRIGHTNESS I GOT FLASHBANGED IN THE MIDDLE OF THE NIGHT
Putting my controller under my desk will only make it more obvious to my partner. That’s where she spends most of her time bro
A 3d printer is a hammer that makes every problem look like a nail
The sound of that plastic would drive me insane
Hanging a controller by the joysticks has got to be the worst idea
Top tip: You can also place a trash can next to your desk and then you dont have to drill a hole through it
Tokyo Stick Drift 2024 !!!
That soda can broke my heart a bit
It's wild how desks used to have drawers and now we buying them without drawers and build drawers to attach to them.
Absolutely wild. What will we accomplish next?
That last one is a perfect way to start getting stick drift
You should make the controller so you can still play with it while its under the table attach something ti the back or something. I think that would be fire🔥
Advice DONT DO THAT TO YOUR CONTROLLERS unless you like stick drift you will regret that shit
That controller mount is guaranteed stick drift
Dangling a controller by the joystick seems like a very good way to get stick drift
Ya know. If you just put a normal trash can on the floor, it would hold more. And you wouldn't have to crawl under your desk and unscrew it when you empty it!
"Would you like to have stick drift?"
"Yes, I want all the stick drift."
The little trashcan is cute ^.^
Can we get a RIP for that controller? The stick drift is going to be insane.
He got the trash can idea because Unnecessary Inventions learns from his mistakes
Intro is when you burn ur companion cube-
This page is making me want to buy a 3d printer 😂
I would advise you to not have a partner, from whom you must hide a game controller.
Legends say elon musk is recording 😂😂
that trashcan would be so convenient as an artist constantly having to throw away scraps of yarn or paper
Stick drift going crazy with this one
That controller's gonna get a bunch of knee smacks and drift.
The last one causes stick drift
How to be creative like you? You never run out of creativity and imagination. Super awesome. I need your creative ideas for my brain.
I need the last one
Stick drift: “I’m boutta end this man’s career”
The last one: bold of you to assume I have a partner.
Controller holder that damages the sticks, trash can that requires drilling a huge hole, small capacity and is in itself trash. Last but not least a tiny drawer. Just what the world needed
Holding the controller by the analog sticks is quite wild 😳 😅
Holding the controller by the joysticks is not something that I've ever thought of, but I immediately hate it😂
The trash bin looks partially inspired by that puzzle table made by the person who makes useless inventions
Stick drift is gonna go crazy
Wow, the Aperture Science Emergency Intelligence Incinerator got an upgrade!
I need that dustbin 💀 Give me that or I will send you to Dr.Doom 💀
You should make fishing a desktop fishing game
Me watching this while my husband and I are waiting in queue for OW2 after playing D4 for 4hrs XD
The 3rd one is probably called
THE STICK DRIFTINNATOR
That poor controller
You better not hide your game addiction from me, I want to plaaaaaay
I wanna see the stick drift on that bad boy after like a week lol
Unironically that trash can is incredible
with a completely impossible to use mouth. something goes in, never comes out.
Hanging the controller by the stick is crazy
Ahh yes hide my game addiction from my partner.
Stares at the f18 cockpit I’m slowly building for dcs 🗿
Make the trashcan a net design so you can see when to take out the garbage
Last one is good, that's if the joysticks don't break 😂💀
I actually need all 3 of these 😂
We’re speed running stick drift with this one
Target audience to sell product:-🇺🇸
Actual audience :-🌍
Lowkey that’s the best Celsius flavor