Nice video mate !! Keep it up!🎣🎣💙 About that noise it happened to me once just buy some good gear oil like Penn stuff. Put some in the shaft when you remove the spool and also inside the pin where you screw the power handle. Just put a little and turn the reel slowly so the oil will get through the gears but don’t put too much just a little each side I mentioned and on roller put some oil as well and work it round with a rubber band or something to move the oil inside. That should fix the problem also if you buy some grease you can put some on the top of your spool inside the washers will help also maintaining the reel in good condition. Hope this helps you out. 😅
After missed strike like that, I open the bail for a couple of seconds to imitate a knock out baitfish after the strike. Sink for 2 or 3 meters and start jigging again. Sometimes this results in a re-strike.
@NicodaFishing yes, get in the head of the baitfish. Some fishspecies first hit the bait and collect it after that (leerfish). That amberjack was nice, they taste good btw 😝
Sound is probably line roller bearing. Sometimes there is a lot of dried salt and you can hear it. And once it gets some water it stops. So replacing it is what you need to do.
Hey brother, I really enjoy your videos and think they are very helpful for beginners like me. I saw how you talked about the sgs2 in this and other videos. I am still deciding if I should go for the sgs2 or a more expensive rod (Hart bloody marine power 20-80g 2.85cm)😅. I fish in Montenegro so the target species will be false albacore and amberjack. I‘d like to hear your thoughts on the marine power (I don‘t understand why it costs 100€ more but maybe you do). Keep it up brotha. I hope I will hear from you soon😊
Hey man! First of all thank you for these kind words! I don't have any personal experience with the Hart rods but after looking online it seems like it is specifically for spinning instead of jigging if that is what you are looking for. The sgs2 will also have a longer butt section, which is ideal for shore jigging as you keep the rod in your armpit. If you on the other hand are looking at the spinning rods, then I have heard great things from friends who use the sgs2 spinning rods and I will most likely go for one myself for next summer. Apologies if I couldn't give you any concrete advice!
For the noise of being in the reel , make sure there is enough grease around the interior parts. Otherwise, check the main bearing. Hope you get that resolved.
I'm very new and confuse to metal jigging. When I first start jigging metal jig for first time, I was told to crank/jerk 3 time and let it sink/wait for 1-3 second. Then, when I watch your video, I keep seeing you crank/jerk forever until you reel it in. When to use certain technique? Please help me clear my confusion!
Hi brother, thank you for the question! I understand that it can be confusing in the beginning and even I am asking questions regularly to learn more from others experiences. So it has a few reasons why you would jig in different ways. Jigging close to the bottom with only a few jerks and then letting it fall will be very effective for fish like groupers and snappers that like to hug the rocks. It can also depend on what type of jig you are using. If you are using a jig like palms slow blatt, these are specifically made for jigging with a few quick jerks, then stop and let it flutter down. From the bottom up to the surface you will find other species, depending on where in the world you live. We have bonito, little tunny and bluefin tuna mainly swimming in the free water mass, and amberjack, blue runners that live closer to the bottom but do not mind chasing after a jig many meters from the bottom. The bait, swimming in the free water around here are mainly sardines and needle fish to name a few. They are on the menu for all of these. Depending on the situation, I will jig about 7-15 times before letting the jig fall again, either to the bottom or stay in mid water. I hope that helps a little bit. Essentially the type of fish you target, that is where your jig should be. Good luck brother!
@@NicodaFishing when you wont to come here come in budva about this period of year… half of october or its best half of novembar… we have a good big fish here ! But you must have good road and reel When you wont to come here write me bro you are my guest !
🎣🌟I've Made a FREE SHORE JIGGING GUIDE, You are Welcome to Read it Here! -- nicoda-fishing.ck.page/3510bb999d 🌟🎣 😍 Interested in reaching an incredible Audience? Become a Sponsor! Check out my Media-Kit here: linktr.ee/nicodafishing
☕ You Are Welcome To Support The Channel, By Buying Me A "Coffe" At☕:
ko-fi.com/nicodafishing
Nice video mate !! Keep it up!🎣🎣💙
About that noise it happened to me once just buy some good gear oil like Penn stuff. Put some in the shaft when you remove the spool and also inside the pin where you screw the power handle. Just put a little and turn the reel slowly so the oil will get through the gears but don’t put too much just a little each side I mentioned and on roller put some oil as well and work it round with a rubber band or something to move the oil inside. That should fix the problem also if you buy some grease you can put some on the top of your spool inside the washers will help also maintaining the reel in good condition. Hope this helps you out. 😅
My man! Thank you so much!!
@@NicodaFishing hope you will fix it buddy 💪😁 contact me if you find any difficulties when doing it. You’re welcome !
After missed strike like that, I open the bail for a couple of seconds to imitate a knock out baitfish after the strike. Sink for 2 or 3 meters and start jigging again. Sometimes this results in a re-strike.
Agree, that is a great method! Also works well if there are several fish hunting together as very often one of the others will take it instead.
This video has a similar situation to that ua-cam.com/video/w31JhWyuyHs/v-deo.htmlsi=wkISyNjAZWZjk9DT&t=185
@NicodaFishing yes, get in the head of the baitfish. Some fishspecies first hit the bait and collect it after that (leerfish). That amberjack was nice, they taste good btw 😝
Great advise! To me all fish taste and smell like 3 days old socks hahah.
@@NicodaFishing you never smelled my socks 🤣🤣🤣
Sound is probably line roller bearing. Sometimes there is a lot of dried salt and you can hear it. And once it gets some water it stops. So replacing it is what you need to do.
Thank you!!! Because it happens so rarely, I have never been able to show anyone how it sounds.
Hey brother, I really enjoy your videos and think they are very helpful for beginners like me. I saw how you talked about the sgs2 in this and other videos. I am still deciding if I should go for the sgs2 or a more expensive rod (Hart bloody marine power 20-80g 2.85cm)😅. I fish in Montenegro so the target species will be false albacore and amberjack. I‘d like to hear your thoughts on the marine power (I don‘t understand why it costs 100€ more but maybe you do). Keep it up brotha. I hope I will hear from you soon😊
Hey man! First of all thank you for these kind words! I don't have any personal experience with the Hart rods but after looking online it seems like it is specifically for spinning instead of jigging if that is what you are looking for. The sgs2 will also have a longer butt section, which is ideal for shore jigging as you keep the rod in your armpit. If you on the other hand are looking at the spinning rods, then I have heard great things from friends who use the sgs2 spinning rods and I will most likely go for one myself for next summer. Apologies if I couldn't give you any concrete advice!
Gde pecas u crnoj gori?
For the noise of being in the reel , make sure there is enough grease around the interior parts. Otherwise, check the main bearing.
Hope you get that resolved.
Will absolutely do that, thank you so much man!!
Ι was sure there was gonna be a sfx when boat passed at 1:06 🤣
Always so nice when i see anglers release the fish😊
Hahahaha am I that predictable you mean?
@@NicodaFishing noooo, i made that sound in my mind also and was happy when i saw that 🤣
@@Time21 😂 great minds think alike!!
I'm very new and confuse to metal jigging. When I first start jigging metal jig for first time, I was told to crank/jerk 3 time and let it sink/wait for 1-3 second. Then, when I watch your video, I keep seeing you crank/jerk forever until you reel it in. When to use certain technique? Please help me clear my confusion!
Hi brother, thank you for the question! I understand that it can be confusing in the beginning and even I am asking questions regularly to learn more from others experiences.
So it has a few reasons why you would jig in different ways.
Jigging close to the bottom with only a few jerks and then letting it fall will be very effective for fish like groupers and snappers that like to hug the rocks. It can also depend on what type of jig you are using.
If you are using a jig like palms slow blatt, these are specifically made for jigging with a few quick jerks, then stop and let it flutter down.
From the bottom up to the surface you will find other species, depending on where in the world you live. We have bonito, little tunny and bluefin tuna mainly swimming in the free water mass, and amberjack, blue runners that live closer to the bottom but do not mind chasing after a jig many meters from the bottom.
The bait, swimming in the free water around here are mainly sardines and needle fish to name a few. They are on the menu for all of these.
Depending on the situation, I will jig about 7-15 times before letting the jig fall again, either to the bottom or stay in mid water.
I hope that helps a little bit. Essentially the type of fish you target, that is where your jig should be.
Good luck brother!
Cracking fish
Thanks mate for this nice session.
Keep doing pal
Cheers
Really appreciate these words! Thank you for the support brother!!
What leader diameter do you use for 60-100 jigs
Hey! On this setup with 60g I use 0.47mm and on my heavier setup with 100g I use 0.57mm.
Great video !! Very nice aj , what was the depth you were fishing?
Many thanks brother! It is around 15m far out, but quickly becomes shallow and is a real minefield with ledges and rocks.
@@NicodaFishing really nice fight on the lighter tackle
Hello Nicoda, you should replace the ball bearing on your line roller on your reel. Best regards ! P.S. Buy a Penn Slammer IV ;-)
Haha yeah the whole reel needs a full service as soon as I get my saragosa back, then it is this one's turn!
Nice video 🎉 congrats 👏
Thanks a lot man!!🙏
how deep is it?
At a full cast around 15m and then it gets shallow quite quickly.
@@NicodaFishing im interested to do shore jigging but it's only 15 ft. I'm not sure what weight jigs to use.
Man those rocks are nasty. One slip and it'll shred your legs. Nice work mate!
Oh yeah, they can be ruthless and just brushing up against them can make you come home with bloody legs without even realizing it. Thank you brother!!
True, the good thing is you will not slip out and fall, the downside is, when you stumble and fall you are officially f*cked 😬😂
Great video! about your real, my guess is that it's either your gear or you need to renew the grease inside the reel body.
Thank you Thomas, I really appreciate it!
Hola nicoda 🎉🎉 una pregunta el jig ,que modelo es ?????
Hi Diego! It is a Slim jig minnow and the color is called Zebra Glow.
It is great in both low light and on sunny days.
Gracias por contestar ,pero la marca del jig ???? , savage gear? Daiwa ,Shimano ??? Saludos
@@diegoleonelchimenti1853 Happy to help! It is made by Savage gear.
👍🐬
Thank you!
👍👍👍❤️
Thank you!🙏
If you hunt duck it would make a great call
Hahaha, Man, you just made me crave Chinese for lunch tomorrow! 🦆
The sound of your reel is probably because of this:
ua-cam.com/video/DjEbXrJTl0s/v-deo.html
Should be an easy, inexpensive fix
Will have a look at that, thank you!!🙏🙏
Super video bro ! Hello from my shore place Town Budva country Montenegro 💪
Thanks a lot brother!! Always wanted to go and fish in Montenegro. Hopefully these videos can one day make that reality!
@@NicodaFishing when you wont to come here come in budva about this period of year… half of october or its best half of novembar… we have a good big fish here !
But you must have good road and reel
When you wont to come here write me bro you are my guest !
Will do brother!
🎣🌟I've Made a FREE SHORE JIGGING GUIDE, You are Welcome to Read it Here! -- nicoda-fishing.ck.page/3510bb999d 🌟🎣
😍 Interested in reaching an incredible Audience? Become a Sponsor!
Check out my Media-Kit here: linktr.ee/nicodafishing