Hi Bin, just pre ordered an M50C, regulated with 22" barrel what CC tank from Bintac would fit as an upgrade for higher shot count? Will end up adding a moderate im.the future. Thanks for all your informative videos, thank you!
what is the lowest power setting it can be set to for ie for UK Laws also which grain pellet or slug should be used in that case. Here in Argentina the power is fine ?
Hola maestro instale la válvula reguladora en mi Challenger pro quiero saber si la regulación es igual a la interna pues sujeto con una llave 18 mm la tuerca y un allen 5 mm el regulador pero igualmente se me mueve toda la válvula como si tuviese cierto arrastre en la tuerca 18 de sujeción y gira con todo otra consulta es que lo puse con los dos plenum que dices tu se ahogará?
Anule la válvula interna y le hice una restricción por dentro de 2mm y puse todo en línea para poder tener manómetros para saber a qué presión está regulando
La válvula es para cal .25 ya lo se que no es para el pro pero igual quería tener regulado externo ,el plenum es más pequeño que me aconsejas luego que la regule el plenum del .30 o el más pequeño pues hay algo que me asa desde que el pcp es nuevo con su válvula original cuando baja la presión del depósito antes de llegar al seteo de la válvula también baja la presión del aire regulado en el plenum y con esta nueva me sucede lo mismo.Sera muy grande el plenum?le logré sacar 311 jul ,con 70 grains 1216 fps si mal no recuerdo
Hi Mike, I also have a lot of fun with your videos 🤩🤠😁 About your question, Bin said NO, but I really don't care much what he say... lol, 😜 I will try my self with one of those. I have a regular Challenger Pro Gen2 and yours is the Long Barrel version, yours comes with a bigger Plemun than my. But both versions, LB and 24'' version don't comes with external regulator, and I believe the external regulator will make a great airgun to the Pros.
The shroud houses the baffles to reduce noise and a spring that completes the semiautomatic function on certain versions of AEA line up. Some other versions house the semiautomatic function in the receiver, which cost more. Example is the terminator or hp ss, this particularly rifle is a bolt action and has no shroud, that's my take on it could be wrong but that's basically what I cam up with.
Kudos to aea for moving forward with these easily adjusted regs. However, Bin you need to knock some sense into their engineers. While the adj reg is awesome it’s IMPERATIVE to compliment it with an adjustable HS pre load. Please AEA wake TF up on this.
@@jeffreykoski2746 hammer spring tension. It needs to be adjusted up when you increase reg pressure and down when you decrease in order to stay in harmony with the pressure at the valve. I don’t believe there is another gun on the market with an externally adjustable reg that lacks that feature
Do not buy from these guys!! I purchased three items, two were defective, it took them over 4 months to send "replacements". GUESS WHAT! THE REPLACEMENTS HAD THE SAME DEFECTS! I would not be surprised to find that they sent me the defective items I sent them. THIS TRULY SUCKS, CONSIDERING THAT THE ITEMS ARE WAY OVERPRICED TO BEGIN WITH!
Good stuff as usual Bin!
Thanks again! We are doing how to install max kit in challenger no ore soon
Awesome, thanks for the tutorial Sir.
Awesome and simple!! I still need to get the m50 barrel and now I need that regulator 😂
Thank you we are having more caliber M50 barrel kit soon
Hi Bin, just pre ordered an M50C, regulated with 22" barrel what CC tank from Bintac would fit as an upgrade for higher shot count? Will end up adding a moderate im.the future. Thanks for all your informative videos, thank you!
Yep we could install doffrent tank for you when we have it no worries
Thank you, I'll give you a text, and thanks for fast reply.
Se le podría poner a un aea challenger pro. ?
what is the lowest power setting it can be set to for ie for UK Laws also which grain pellet or slug should be used in that case. Here in Argentina the power is fine ?
Great video! Can you do a video installing this in a .72cal Zeus Gen2?
What is the highest regulated pressure? How much energy the slugs will have?
What comes in the box with your guns, do they include magazines or ?
Hola maestro instale la válvula reguladora en mi Challenger pro quiero saber si la regulación es igual a la interna pues sujeto con una llave 18 mm la tuerca y un allen 5 mm el regulador pero igualmente se me mueve toda la válvula como si tuviese cierto arrastre en la tuerca 18 de sujeción y gira con todo otra consulta es que lo puse con los dos plenum que dices tu se ahogará?
Another excellent video as always my man. Could this adjustable regulator be installed in the Challenger Pro?
Yep but only one thing it does not show the regulated pressure on pro because different receiver design
@@sigshooter6213 ty bin
Will this eliminate the valve on the fill port that leaks constantly ?
How much extra length does this give the tank?
Hello, nice thanks a lot for your vidéo. I'm french and I'm looking for a régulator for the HP max. But where could I find it ?
Anule la válvula interna y le hice una restricción por dentro de 2mm y puse todo en línea para poder tener manómetros para saber a qué presión está regulando
Hello, can someone tell me how long the 600cc tank is for the HP/Max/Element Max AEA airguns?
La válvula es para cal .25 ya lo se que no es para el pro pero igual quería tener regulado externo ,el plenum es más pequeño que me aconsejas luego que la regule el plenum del .30 o el más pequeño pues hay algo que me asa desde que el pcp es nuevo con su válvula original cuando baja la presión del depósito antes de llegar al seteo de la válvula también baja la presión del aire regulado en el plenum y con esta nueva me sucede lo mismo.Sera muy grande el plenum?le logré sacar 311 jul ,con 70 grains 1216 fps si mal no recuerdo
I saw a guy make a small hp max pistol are you going to be selling that plenum portion by itself it looks like it could be used as a tank itself?
Yep that is one of ours new release this coming week
Do you have kit for the aea terminator 357 gen 1
Will this work on my AEA HP SS MAX?
Where can I buy that regulator you are installing?
From my website
The dealer I purchased a HP max ss from, says there isn't a regulator for the HP max ss. Is this true?
No this regulator kit definitely work on all maxs
Can this be used on AEA Challenger Pro rifles?
Hi Mike, I also have a lot of fun with your videos 🤩🤠😁
About your question, Bin said NO, but I really don't care much what he say... lol, 😜 I will try my self with one of those.
I have a regular Challenger Pro Gen2 and yours is the Long Barrel version, yours comes with a bigger Plemun than my. But both versions, LB and 24'' version don't comes with external regulator, and I believe the external regulator will make a great airgun to the Pros.
Dónde comprar el regulador ?
Question...what purpose does the barrell shroud serve after installing a moderator?
Sorry no clue I do not use moderator
@@sigshooter6213 does the shroud serve a purpose?
The shroud houses the baffles to reduce noise and a spring that completes the semiautomatic function on certain versions of AEA line up. Some other versions house the semiautomatic function in the receiver, which cost more. Example is the terminator or hp ss, this particularly rifle is a bolt action and has no shroud, that's my take on it could be wrong but that's basically what I cam up with.
@@arivega1312 the bolt action and SA have shrouds, but there's nothing in the bolt action shroud, just a hollow tube. Does it just help dampen noise?
I think the shroud tensions the barrel from movement and added to accuracy, other than what we mentioned before.
Este se puede poner en challeger pro¿
"Hand-tight" means no force and no tools. What you performed with tools would be described as "lightly tightened".
Will this fit on a Gen 2 Zeus 32" .72cal?
Yep
Kudos to aea for moving forward with these easily adjusted regs. However, Bin you need to knock some sense into their engineers. While the adj reg is awesome it’s IMPERATIVE to compliment it with an adjustable HS pre load. Please AEA wake TF up on this.
What is an adjustable preload? Please explain, thanks!
@@jeffreykoski2746 hammer spring tension. It needs to be adjusted up when you increase reg pressure and down when you decrease in order to stay in harmony with the pressure at the valve. I don’t believe there is another gun on the market with an externally adjustable reg that lacks that feature
😊😊😊😊😊hi
Do not buy from these guys!! I purchased three items, two were defective, it took them over 4 months to send "replacements". GUESS WHAT! THE REPLACEMENTS HAD THE SAME DEFECTS! I would not be surprised to find that they sent me the defective items I sent them. THIS TRULY SUCKS, CONSIDERING THAT THE ITEMS ARE WAY OVERPRICED TO BEGIN WITH!