Thank you my good man. We touch tool #2 as is our master tool and the rest of the tools follow. We touch the other tools if we change the fixtures or different type of jobs. We touch, z face measure, -.0315, enter.
haha I have used an SL20 for more than 15 years.. But i still didnt know u could type T2 and turret fwd .. I have always typed it in mdi and pressed start ;D
What if the part you are machining is bigger and you dont have big enough micrometer to measure diameter? Is there any other way to measure offsets on bigger parts? Thanks
To set your offset on X axis you can use any diameter you want, just find something close to the mic you're using to measure.Once you've done you X you don't have to do it for every part your turning.
Congratulation CNC master your teaching is very good
There was just I was found
Thank you for sharing us
Thank you. I have more videos available if you like them.
That was a nicely done demo.
Thats realy great thanks alot
432 is a roughing insert
431 is a finishing insert
👍
Thank you my good man. We touch tool #2 as is our master tool and the rest of the tools follow. We touch the other tools if we change the fixtures or different type of jobs. We touch, z face measure, -.0315, enter.
Can you explain quadrants a little better, what or why is that corner 3?
Yeah, i didn't get that, either
@@Gendo3s2k quadrants determine what side of the part you're cutting on and whether or not you're cutting on the OD or ID of the part
haha I have used an SL20 for more than 15 years.. But i still didnt know u could type T2 and turret fwd .. I have always typed it in mdi and pressed start ;D
This could be done in 30 seconds with a touch setter
What is the door override?
no voice please increase the volume thanks
What if the part you are machining is bigger and you dont have big enough micrometer to measure diameter? Is there any other way to measure offsets on bigger parts? Thanks
To set your offset on X axis you can use any diameter you want, just find something close to the mic you're using to measure.Once you've done you X you don't have to do it for every part your turning.