TIP: For anyone with this kit or similar and is still having issues after wiring it like the video here is a fix. Plug the pins into the connector just as it shows in the video. When you plug the connector into the red part on the ballast just flip them around on both of them. Mine actually had a positive and a negative mark on each one to match them up. So you’ll want the positive side to go into negative slot and the negative side to go into the positive side if that makes sense. Many hours of frustration and this is what finally got mine to work correctly.
4300k is the best brightest colour to have, you loose some luminance at 5000k, but still useable, I hate 6-8 thousand k lights, I threw my 6000k halogen in the garbage because I couldn't see in the rain with them, thanks for the info.
I had the same problem with my h4 kit.. .they had the wire leads all in the wrong place, Hi was in the low spot... glad ground was right or maybe BOOM. mine lasted a loooong time... I did have a ballast die, but $20 to replace.
Great vid man, i have the same kit. 2 questions: #1.....for the passenger side oem connector in the harness do you just tape it up to keep the moisture out? #2...... On the hid bulb itself, do you remove the metal cage around it? I just want to maximize light ouput and concentration, my toyota has really reflective material in the housing itself.
I installed a H4 conversion kit on my Nissan Np300. But one of my bulbs keeps going off or not responding. Since each bulb has an earth cable must i put both on the car body? Or must i install one on the battery ??
I ordered a set of high and low beam hid kits my question is how do I know if I will need the extra relay wires or not I plan to install them in the early spring so I have some time what is the purpose of the relay harness
Hi. Are the Xenon kits (of each manufacturer) essentially the same (components, ballasts, etc.)? By that I mean that can you install a particular kit in a car with H4 bulbs, and then later remove the kit from the H4 bulb car and install to another car (that takes H1 bulbs) with putting H1 bulbs? Or do yo have to buy an H1 kit?
Great vid. I have similar set. But having issues with the passenger side not working sometimes. There’s no factory plug just ground. Ground is good but intermittently work. Any suggestions on how to fix would be greatly appreciated. Thanks.
Hi eacardoc1, I never heard of the actual bulb moving up and down to switch from low to high beam. All of the Bi Xenon HID retro's I've been looking at, the switching between the low and high function is done with a small solenoid activated deflector/cutoff within the projector itself. the deflector is normally up when using the low beams, and drops down for full light output when going to high beams. Is DDM Tuning still selling the type of kit you installed? Learn something new every day. Are those kits still working for you. And which one do you think is the best from DDM Tuning that you installed. Thanks for posting. All the best.
looking at the ballast LOL,,,can it get any bigger??? :) Ballasts are too bulky! Is it AC ballast or DC? I would go with Sportiva or Opt7 kit ,,much cleaner one and more reliable ballast! However ,,,,I know Xentec said their kits have 2 year warranty!
I,am install to hid kit sonata 2015 letest after come to chek the headlight left and right .becous i,am install to hid sonata 2012 , 13, 14 no problem .?plz comment
so only one factory harness coming out of the vehicle is used? the one on the side with the battery? what did you do with the other one, just tuck it away somewhere?
+Martial Arts Tutorials & Fight tips Yes Bi-Xenon gives you both high and low beams. It uses the same bulb but there is an electromagnet that physically moves the bulb up and down for high/low beams
The problem with having HID installed on the vehicle is, people installed them on a stock headlight lens that are not designed for HiD 's ! So when driving down the road they are fucking annoying to the other drivers..they look like high beams are on all the time ... if your going to install them , do it correctly and get after market hid lens if you don't already have the proper lens on the vehicle!! Other than that it's all good..
Well...I have installed several HID kits and I have never bothered to disconnect the battery but I'm sure it's probably a good idea as a saftey precaution since the ballasts put out around 23,000 volts to light the HID bulbs.
eacardoc1 it is the safe thing but I've been doing car audio for years and that is major electric fry if postive touch a ground aka metal just be careful
I'm looking at getting some HID's for my truck and not sure which brand to get. you think that Xentec is the way to go? Any other products you'd recommend?
Drew Cohn This 55 watt kit actually still worked over a year later when I upgraded to LEDs but they weren't as bright as when I first installed them. The Xentec 35 watt kit I installed in a different vehicle was junk! The 55 watt DDM tuning HIDS are still working good over a year later but they are really slow on shipping... I have videos on all 3 kits. I have also used DDM tunings "ultra" hid kits with good results but I don't have a video of them yet...
Drew Cohn I been doing research and ALOT of people get butthurt when you say you're putting a HID kit on non projector headlights. I have a 93 accord and it has glass headlights not the shitty plastic ones that new cars have. I could run anything without melting mine but I don't wanna be a hazard on the road. Zentec HIDs are garbage though.
dumbest invention of hid lights ever, better off putting in a normal bulb or getting a hi low led kit, simple plug and play, no messing around like this
TIP: For anyone with this kit or similar and is still having issues after wiring it like the video here is a fix. Plug the pins into the connector just as it shows in the video. When you plug the connector into the red part on the ballast just flip them around on both of them. Mine actually had a positive and a negative mark on each one to match them up. So you’ll want the positive side to go into negative slot and the negative side to go into the positive side if that makes sense. Many hours of frustration and this is what finally got mine to work correctly.
Every kit I had I had to flip them why is that
My kit just blew my fuse?
4300k is the best brightest colour to have, you loose some luminance at 5000k, but still useable, I hate 6-8 thousand k lights, I threw my 6000k halogen in the garbage because I couldn't see in the rain with them, thanks for the info.
Did you install them in HID Projector housings or normal halogen housings?
Vince Fairleigh
Big Fail 6k is just perfect for visibility
Looks like you don’t know nothing about anything . There is no 6000 k halogen
I had the same problem with my h4 kit.. .they had the wire leads all in the wrong place, Hi was in the low spot... glad ground was right or maybe BOOM.
mine lasted a loooong time... I did have a ballast die, but $20 to replace.
Very good videos keep up the good work god bless you man.
brandon wright Thanks a lot!
@@eacardoc1 which site i can Buy this kit Xenon ???
I watch you from Brazil.
Thanks for the info,that helped.I appreciate it.
I installed a 35w hid kit from xentec and it made my foglight housing really hot from just a minute of use.
xoarz do you have stock fog lights I got a video of my hid fog lights they do good
ent u see d silver around d bulb u takin out that or leaving it as it is???
Great vid man, i have the same kit. 2 questions: #1.....for the passenger side oem connector in the harness do you just tape it up to keep the moisture out? #2...... On the hid bulb itself, do you remove the metal cage around it? I just want to maximize light ouput and concentration, my toyota has really reflective material in the housing itself.
make sure you retrofit those hids in a projector... otherwise you will blind everyone else on the road lol..
I installed a H4 conversion kit on my Nissan Np300. But one of my bulbs keeps going off or not responding. Since each bulb has an earth cable must i put both on the car body? Or must i install one on the battery ??
Kensun 55w vs xentec 55w whose better
Do you mind if you could send me the link to where you bought these?
I ordered a set of high and low beam hid kits my question is how do I know if I will need the extra relay wires or not I plan to install them in the early spring so I have some time what is the purpose of the relay harness
Hi. Are the Xenon kits (of each manufacturer) essentially the same (components, ballasts, etc.)? By that I mean that can you install a particular kit in a car with H4 bulbs, and then later remove the kit from the H4 bulb car and install to another car (that takes H1 bulbs) with putting H1 bulbs? Or do yo have to buy an H1 kit?
Great vid. I have similar set. But having issues with the passenger side not working sometimes. There’s no factory plug just ground. Ground is good but intermittently work. Any suggestions on how to fix would be greatly appreciated. Thanks.
Im having similar problem. Did you find a solution??
Hi eacardoc1,
I never heard of the actual bulb moving up and down to switch from low to high beam. All of the Bi Xenon HID retro's I've been looking at, the switching between the low and high function is done with a small solenoid activated deflector/cutoff within the projector itself. the deflector is normally up when using the low beams, and drops down for full light output when going to high beams. Is DDM Tuning still selling the type of kit you installed? Learn something new every day. Are those kits still working for you. And which one do you think is the best from DDM Tuning that you installed. Thanks for posting. All the best.
Are the bi xenon bulbs larger than a single beam bulb?
looking at the ballast LOL,,,can it get any bigger??? :) Ballasts are too bulky! Is it AC ballast or DC? I would go with Sportiva or Opt7 kit ,,much cleaner one and more reliable ballast!
However ,,,,I know Xentec said their kits have 2 year warranty!
mine didnt come with the connector to plug in where the headlight was, what are my options
I,am install to hid kit sonata 2015 letest after come to chek the headlight left and right .becous i,am install to hid sonata 2012 , 13, 14 no problem .?plz comment
so only one factory harness coming out of the vehicle is used? the one on the side with the battery? what did you do with the other one, just tuck it away somewhere?
Trevor Yates yeah thats pretty much what you do , when i removed mine that was pre installed before me the other harness was tucked away
How to install hid kit in hyundai sonata letest 2015 plz comment
Dear please confirm if BI XENON means you have hi and low light
+Martial Arts Tutorials & Fight tips Yes Bi-Xenon gives you both high and low beams. It uses the same bulb but there is an electromagnet that physically moves the bulb up and down for high/low beams
eacardoc1 thanks Brother, good day to you
i got the same thing except 35w slim ballast.. they look exactly the same as this.. really good stuff imo
Chris Cas does it use a relay ?
idk i got rid of mine long time ago... i use led now. much better than hid. no warm up just clean lights
Ok thanks
My trouble is, I installed them, and they blew my fuses.
Anyone knows why my high light sensor it’s on every time I turn my lights on ?
since I installed my kit
The problem with having HID installed on the vehicle is, people installed them on a stock headlight lens that are not designed for HiD 's ! So when driving down the road they are fucking annoying to the other drivers..they look like high beams are on all the time ... if your going to install them , do it correctly and get after market hid lens if you don't already have the proper lens on the vehicle!! Other than that it's all good..
do I have to disconnect the battery first before proceeding the installation of my HID kit?
Well...I have installed several HID kits and I have never bothered to disconnect the battery but I'm sure it's probably a good idea as a saftey precaution since the ballasts put out around 23,000 volts to light the HID bulbs.
eacardoc1 it is the safe thing but I've been doing car audio for years and that is major electric fry if postive touch a ground aka metal just be careful
I'm looking at getting some HID's for my truck and not sure which brand to get. you think that Xentec is the way to go? Any other products you'd recommend?
Drew Cohn This 55 watt kit actually still worked over a year later when I upgraded to LEDs but they weren't as bright as when I first installed them. The Xentec 35 watt kit I installed in a different vehicle was junk! The 55 watt DDM tuning HIDS are still working good over a year later but they are really slow on shipping... I have videos on all 3 kits. I have also used DDM tunings "ultra" hid kits with good results but I don't have a video of them yet...
awesome, thanks man!
So you wouldn't recommend the 35W kit? I don't wanna spend alot on a kit that I'm un sure of. Which kit do you think is the best for the money?
35W won't be as bright as the 55W kit. I'd almost bite the bullet and get the 55W for your money's worth
Drew Cohn
I been doing research and ALOT of people get butthurt when you say you're putting a HID kit on non projector headlights. I have a 93 accord and it has glass headlights not the shitty plastic ones that new cars have. I could run anything without melting mine but I don't wanna be a hazard on the road. Zentec HIDs are garbage though.
Did they last??
Yeah so far, I've had them on my car for around 8 months now and they are still working fine.
+eacardoc1 thanks your your reply. I will go with these.
eacardoc1 are they lasting still?
Does 6000k can work on 35w or 55w ballast
both it will run on 35w or 55w the wattage of the ballast depends on how bright you want your headlights
Bro pls tell me h4 Bi-xenon means dual beam hid pls reply my ans
One of mine is brighter than the other
That’s on my end not the bulbs or huh
Thank you
ac or dc ballast?
alguien que pueda dustribuirme este produco a mexico
amigo si no me equivoco ebay o amazon debe distribuir hasta alla,checalos
XENTEC IS ON OF TBE CHEAPEST MOST UNRELIABLE IT BEING SOLD!!! Would recommend any other kit than XENTEC!!!!!
😆 they don't move up and down. They move in and out .
👍
Çok mükemmel.
Hi Nick! Check this out!
شغل عدل
Xentec is bad quality
Why
those are garbage junk trash throw those away
Garbage ebay crap, deffinetly wouldn't put that in a more expensive car and risk harness and headlight burn outs
Why do you think so
dumbest invention of hid lights ever, better off putting in a normal bulb or getting a hi low led kit, simple plug and play, no messing around like this
i tore up a huge light gun anf this was inside and im like wtf is this for ?