Klipper_LED works on StealthBurner bt2

Поділитися
Вставка
  • Опубліковано 25 гру 2024

КОМЕНТАРІ • 30

  • @madorax251
    @madorax251 2 роки тому +2

    can you share the configuration SB led_effect you use

  • @acevtura4244
    @acevtura4244 2 роки тому +2

    Very cool, great job!

    • @devgru07
      @devgru07  2 роки тому

      thanks a lot! have fun!

  • @3dler923
    @3dler923 2 роки тому +1

    👏👍 very cool, thanks

  • @lancereyesromero7811
    @lancereyesromero7811 Рік тому

    hey man I man new here I mean with neopixels. when wiring the 3 led. the voron logo should be connected to first right? then the 2 bottom led next? Just wanted to make sure.

  • @solidus784
    @solidus784 2 роки тому +1

    Thanks for sharing, I'm just waiting on my neopixels to arrive. I was also thinking of changing my caselights to rgb for status effects but not sure yet.

    • @devgru07
      @devgru07  2 роки тому

      a klipper_led script will working fine on your caselights otherwise visit teamfdm.com for led strip on the top of frame stls?

    • @solidus784
      @solidus784 2 роки тому

      @@devgru07 yeah I intend to just have them as the list link in the neopixel chain of addresses. I'll get the tool head working first though🤞🤣

    • @devgru07
      @devgru07  2 роки тому

      @@solidus784 have g'luck guy!!!

  • @Rcmike1234
    @Rcmike1234 2 роки тому +1

    Do you print with a bed mesh enabled typically?

    • @devgru07
      @devgru07  2 роки тому

      no i am not bcos of i used manual bed mesh information that default value then i using "BED_MESH_PROFILE load=default before print out. and you can fixing bed mesh fault vaule at the bottom of printer.cfg

  • @GrulbGL
    @GrulbGL 2 роки тому

    A 3 minute 3D printer rave… just before star printing 🤣🤣

  • @duci8
    @duci8 Рік тому

    The link is broken. Can you give me the new fil

  • @u2ramess666
    @u2ramess666 2 роки тому

    I'd like to know what I have to do to make my printer home then stow probe. Also is it just as simple to have the system raise gantry on stow just changing the Y to a Z in the config?

    • @devgru07
      @devgru07  Рік тому

      sure why not easy? : ) make sure jus' add gcode any cfg file on your klipper host such as raspberry pi then move and verifying toolhead position by m114 on console tab. so refer that x,y value with move speed (ef. F15000) for stow action.

  • @klendatas1
    @klendatas1 2 роки тому +1

    Didn't even know you can measure where is nozzle by clicking z probe with klicky and then nozzle :D

    • @devgru07
      @devgru07  2 роки тому +1

      absolutely yes let's try it of!

  • @Antebios
    @Antebios 2 роки тому

    How did you make the Neopixels pulse? What is the macro?

    • @devgru07
      @devgru07  2 роки тому

      let's do this klipper led on your RPi :) github.com/julianschill/klipper-led_effect

  • @FiglioBastardo
    @FiglioBastardo 2 роки тому

    I've no fuk'n clue as to what's going on here but it was cathartic and entertaining nonetheless. I've been wanting to get into 3d printing recently and of course the youtube robot is now flooding my feed with 3d print stuff and I'm not even mad. Have a great day. Newb out.

    • @devgru07
      @devgru07  2 роки тому +1

      yo don't go to far with that 3d printer~ have fun!

    • @FiglioBastardo
      @FiglioBastardo 2 роки тому

      @@devgru07 I only want it for one thing, and one thing only. 😂

    • @devgru07
      @devgru07  2 роки тому +1

      ​@@FiglioBastardo what the heck that was?

  • @Andrew-nj1jt
    @Andrew-nj1jt 2 роки тому +1

    Nice! Would you mind sharing that config?

    • @devgru07
      @devgru07  2 роки тому +2

      also you can pick that config on github with keyword "voron 2.4 calibration_z"

    • @Andrew-nj1jt
      @Andrew-nj1jt 2 роки тому +2

      @@devgru07 ok, thanks

    • @BennyVermeulen
      @BennyVermeulen 2 роки тому

      @@devgru07 care to share a link? Cannot find anything mentioning 'calibration_z'. Maybe I am looking in the wrong place?

    • @BennyVermeulen
      @BennyVermeulen 2 роки тому

      Actually, will try your guide using Google translate first :) Thank you

    • @devgru07
      @devgru07  2 роки тому

      @@BennyVermeulen github.com/protoloft/klipper_z_calibration / right here