Epic video!! Love what your doing with this thing. The losi 3.4 itself is a huge upgrade for bottom end and tuneability. Already watched your other videos and wanted to see this beast get built!!
Thanks for checking it out man we're going to get it out into a big open area so we can really let it fly I wasn't even hammering on it cuz I didn't have enough room
You should try the buku pipe, it has a lot of adjustability especially when you have a servo controlling the convergant cone. They include to cones and you can alter the hole size, if he still sells them. I use it and love it. Good low end, mid and top end if you size the header length right along with the cone size.
Love to see this is real time the 3.3 put together... Got a link on the crank? Woogie you are a badass wish U was In Missouri. So I could learn more from you.
Just blew my good motor and was looking around for maybe better gearing or engine but after seeing this I’m going to get these parts and put it on my full metal v1 Tmaxx and see if I can get it to wheelie again
If you pinch the sleeve to get good compression back, add a 3 stage clutch or even just alloy shoes to the stock clutch, seal the exhaust good, and tune it right. It’ll pull wheelies all day! I just got mine pulling wheelies into 2nd gear, and it was a pretty much dead engine. I got an 11k carb coming to just compare, but my T-Maxx almost has too much power!
To be honest with you I've already thought about that after breaking we're going to change the Conrad and upgrade to ceramic bearings I can get those from RCR as well but good call Traxxas is known for crap bearings
Where did you get your brake upgrade from? ive been looking all over for my jato. already had the stock one fail once. All I was able to find is another stock replacement which are junk. great video btw. I love these TRX engines and its nice to see someone that knows what the hell they are doing showing someone like me that has little experience what they can do to modify one. Thanks Woogie!
There are hot racing upgraded vented brakes with carbon fiber pads every now and then you can still find them on eBay but I got them from my local hobby shop
I used some sway bar links from one of my fifth scales and threaded. The two links together bolted them to the STRC drag bar , took me a while to figure it out but I'll show it one day and one of my future videos. It's actually adjustable side to side and hire and lower
Technically rcr is bad for there prices, if you look at the actual modded crankshaft versus this this just looks like a dude put it in a drill press and drill those holes into the crankshaft and cut off the corners
Epic video!! Love what your doing with this thing. The losi 3.4 itself is a huge upgrade for bottom end and tuneability. Already watched your other videos and wanted to see this beast get built!!
Nice work, Traxxas funny car front tires mount right up to the Jato for a super light alternative
Gotta respect that V.G.G background ambience 😊
I’ll be dipped. I can’t believe it…. But I gotta…. I’m looking right at it!
Do I hear vice grip garage playing in the background? Lol
Huge work on the crankshaft! Cant wait to see that thing running 💪
Epic video!! Love what your doing with this thing. The losi 3.4 itself is a huge upgrade for bottom end and tuneability. Already watched your other videos and wanted to see this beast get built!!
Thanks for checking it out man we're going to get it out into a big open area so we can really let it fly I wasn't even hammering on it cuz I didn't have enough room
Nice to see Traxxas get some attention. Looking forward to seeing it run.
That Jato is going to go like a scalded cat.
I've always loved the look of those motors
Good to see you made it back to Texas
I’m so glad you did a Traxxas . You’re my hero
You should try the buku pipe, it has a lot of adjustability especially when you have a servo controlling the convergant cone. They include to cones and you can alter the hole size, if he still sells them. I use it and love it. Good low end, mid and top end if you size the header length right along with the cone size.
Beautiful setup woogie! Might pull my jato out soon man. Been a while
Bad ass Jato
I have a couple of the Losi Speed NT
Did you sample the old traxxas cd catalogs for the music? These go hard
Love to see this is real time the 3.3 put together... Got a link on the crank? Woogie you are a badass wish U was In Missouri. So I could learn more from you.
RC renew.com
@@woogienitro Thank you Sir.
@@woogienitroquestion what’s the part number for the ths pipe I would like to somewhat replicate this build I love it
Just blew my good motor and was looking around for maybe better gearing or engine but after seeing this I’m going to get these parts and put it on my full metal v1 Tmaxx and see if I can get it to wheelie again
If you pinch the sleeve to get good compression back, add a 3 stage clutch or even just alloy shoes to the stock clutch, seal the exhaust good, and tune it right. It’ll pull wheelies all day!
I just got mine pulling wheelies into 2nd gear, and it was a pretty much dead engine. I got an 11k carb coming to just compare, but my T-Maxx almost has too much power!
I wonder how the bearings gonna hold up… As with the stock configuration, theyre not much relliable. Anyway, that Jato is looking awesome!
To be honest with you I've already thought about that after breaking we're going to change the Conrad and upgrade to ceramic bearings I can get those from RCR as well but good call Traxxas is known for crap bearings
Just ordered this cranck for the 2.5R mod
Sweet
Where did you get your brake upgrade from? ive been looking all over for my jato. already had the stock one fail once. All I was able to find is another stock replacement which are junk. great video btw. I love these TRX engines and its nice to see someone that knows what the hell they are doing showing someone like me that has little experience what they can do to modify one. Thanks Woogie!
No worries man that's the hot racing break upgrade a little pricey going to be about 50 bucks
Traxxis rods saw that crank and instantly got an EPO lol I just broke a factory Traxxis rod in my 3.3 it’s not even had a full gallon ran through
Believe it or not, I'm still on the original piston and rod and I've run the snot out of it
❤😂🎉😢😮😅😊. ไฟไฟไฟไฟไฟแอดพ์ ?
Should be able to use the carb arm from the 3.3 carb
No the slide is bigger than the 33 it will not fit
Where did you get the upgraded brakes?
There are hot racing upgraded vented brakes with carbon fiber pads every now and then you can still find them on eBay but I got them from my local hobby shop
You need 11k carb off of a o.s 18tz that’s what I use powerhouse best tune brother
What clutch is that?? Doing the same build for my Drag Slayer 4x4 & looking to upgrade clutch to the best I can get
Buku 3 shoe..it's an adjustable clutch with brass insert shoes
www.bukupower.com/Clutch.aspx
@@woogienitro thank you 🙏
I want a jato what pipe and header is that that’s so nice
The header is a Nova rose c41-015 on road header and the pipe is a THS racing pipe
Siick vid!!
What type of fuel are you running ?
I run bones Brew 30/10
@@woogienitro 👍🏾thanks
You got a part number for that crank for the 3.3
www.rcrenew.com/Traxxas%203.3%20crankshaft%20MOD.html
@@woogienitro thanks
What wheelie bar kit is that I had to make my own lol
I had to customize it. It is an STRC /wealey bar that I customize. I showed how I did it a couple of videos ago
I’m new to this if you can give some pointers I’ll appreciate it
Be patient
how did you mount the wheelie bar??
I used some sway bar links from one of my fifth scales and threaded. The two links together bolted them to the STRC drag bar , took me a while to figure it out but I'll show it one day and one of my future videos. It's actually adjustable side to side and hire and lower
Would love to see a video on it!
Technically rcr is bad for there prices, if you look at the actual modded crankshaft versus this this just looks like a dude put it in a drill press and drill those holes into the crankshaft and cut off the corners
Where did u get the buku clutch?
Just go to the buku website
Thanks man!
What is that wheelie bar?
STRC I modified it to fit. I also use some 5th scale parts on it
Is THS out of business?
I believe so
@@woogienitro you have a lot of pipes on standby. Last one I got from them was a smaller one for my RedCat STR Lightning.
Everyones using up these 3.4 carbs and not leaving any for actual losi 3.4 engines!! Just use the os11k and save the 3.4s! Theyre discontinued!
I can’t even find any OS 11K carbs without buying an entire OS motor. I’ve looked everywhere
Can you send me a link to get those moded parts
Yeah just go on either DDM for some of it and Detroit performance look for Baja 5B upgrades
Just be careful cuz you can spend a lot of money
If you say peace as a cut away, you cant then smash the camera man, that's violence, which is the opposite of peace.
Thanks for checking it out
How can I get this engine and get it modded by the rcr tuners
Go to RC renew web site
@@woogienitro thank you brother
Epic video!! Love what your doing with this thing. The losi 3.4 itself is a huge upgrade for bottom end and tuneability. Already watched your other videos and wanted to see this beast get built!!