Thank you, I watched your video again and again over the years. Helped me out on certain issues but I always have a difficult time putting the insert back in. Don't know when I wash it if something moves and I can't get it back into place. It's happening to me now as I am writing this. Please help. Thank you
Maciej Piotrowski- co w przypadku, gdy pali się na czerwono wykrzyknik i nic nie działa? Jakie czynności wykonać? Nie mam gwarancji, kawiarkę dostałam w prezencie :-) dziękuję za pomoc
Jest woda, wszystko uzupełnione jak należy:-) Jedyne czego nie próbowałam, to przytrzymanie dłużej przycisku z zielona kroplą wody (po prawej stronie), gdzieś wyczytałam, że to też jakiś reset, który warto zrobić.
@@malinka0505051 Tak to tez dziala zeby pozbyc sie czerwonego swiatla kiedy musimy zrobic odwapnienie ekspresu co jakies 3 miesiace. Prosze przytrzymac ten przycisk po prawej stronie przed 6-8 sekund i zobaczyc co sie stanie. Czasami inne migajace switla sa spowodowane ze pokretlo na gorze do robienia pary nie jest do konca wylaczone. Prosze tez wiec przekrecic go zeby zaczela leciec goraca woda lub para i potem przekrecic zeby wypuscic cala pare i zamknac potem ta pokretlo.
Despite full water container the red exclamation is on and machine does not draw water... any ideas? (Tried tapping on it, making sure water is well connected, touched the grinder, cleaned the inside as on this video)...
Nothing unusual. 1. Turn froth knob on and off. Make sure it's in OFF position. 2. Sometimes when you add water or coffee when machine is off it will not detect it. Restart it. See if that helps.
hi. on my machine the top and bottom lights are flashing in red. if i turn off and on again, the lights are off and only the green for the water. all good. However, when i press the brew button, the top and bottom lights start flashing again in red and no coffee is brewed...any tip? thanks a lor
I usually remove all containers from both sides put everything on again and try to start over. Try turning froth know on and off. Also, you may have clogged dispensing line. Do you do descaling every few month ?
@@MaciejPiotrowski hi.yes every ca. 3 months. I love to anew place and the machine made 2 coffees and started with this new problem.i transported in the original bis and shouldn't be the issue. I had to remove the milk island and out back again...could this has something to do? As I said,not did make 2 coffees before the problem, and it was working flawless before the move...
@@Gledii I had similar blinking lights last week, but I didn't have enough coffee in top bin. It took me few min of opening and removing everything and turning all knobs on and off to reset it. Make a video clip and post it on you tube and send me a link so I can see it to help you better. I can't do much if I don't see the problem.
@@Gledii Looks like you have bit different model than mine. I think your grinder might be stuck casue I didn't see attempt to grind. Remove everything including coffee. Make sure you only use full beans and do not use dark coffee. Dark coffee is too greasy and will clog the machine. So empty everything and see what happens.
So a week ago I got a Seaco Odea coffee maker,it was a present for my birthday. The other day I made 2 coffee's,everything was perfectly fine. On the next day,the machine wouldn't make anymore coffee. When I turn it on,this icon that looks like a key,is flashing - green color. I know it shouldn't flash,it should just stay on. According to google: Flashing quickly (multiple times per second): The machine is too warm, dispense some hot water to cool down the machine. There is not any hot water..? I did change it,tried anything but it just won't stop blinking. Please any fix for that? What should I do?
That icon shows if water temp if good. If you leave this machine on for too long it may start flashing. Turn it off after you make coffee. Also if you don't turn froth know all the way it may also flash. Hope this helps.
I havent turned on the machine for a week now,I just tried and that icon continues to flash. Tried changing the water again,still the same.Nothing works...
Ludogorets Razgrad I know what this is. When you turn the know on top of the machine that allows you to create steam is not turned all the way to off position. After you make a steam to froth milk, if you turn it off , but not all the way then the light might be blinking. My wife did this few times. When I turned machine on that light was blinking so what I had to do is to turn steam on to allow some water to come out until the light stopped blinking. Very important - after you use steam you need to release the feast of the pressure until just water comes out of froth tube. If you don’t before making more coffee, then you will damage pressure seals inside the machine. Hope this helps.
Very helpful! I got mine up and running from your videos!!
Thank you for helping me out to fix my Saeco coffee maker your Video was a big help to me
Thank you, I watched your video again and again over the years. Helped me out on certain issues but I always have a difficult time putting the insert back in. Don't know when I wash it if something moves and I can't get it back into place. It's happening to me now as I am writing this.
Please help. Thank you
The key is to hold the release button of front of the unit you clean and sliding the bottom part of the unit into the guides slowly. Hope this helps.
Maciej Piotrowski- co w przypadku, gdy pali się na czerwono wykrzyknik i nic nie działa? Jakie czynności wykonać? Nie mam gwarancji, kawiarkę dostałam w prezencie :-) dziękuję za pomoc
Wykrzyknik pokazuje ze nie ma wody. Dolac wiec trzeba wody.
Jest woda, wszystko uzupełnione jak należy:-) Jedyne czego nie próbowałam, to przytrzymanie dłużej przycisku z zielona kroplą wody (po prawej stronie), gdzieś wyczytałam, że to też jakiś reset, który warto zrobić.
@@malinka0505051 Tak to tez dziala zeby pozbyc sie czerwonego swiatla kiedy musimy zrobic odwapnienie ekspresu co jakies 3 miesiace. Prosze przytrzymac ten przycisk po prawej stronie przed 6-8 sekund i zobaczyc co sie stanie. Czasami inne migajace switla sa spowodowane ze pokretlo na gorze do robienia pary nie jest do konca wylaczone. Prosze tez wiec przekrecic go zeby zaczela leciec goraca woda lub para i potem przekrecic zeby wypuscic cala pare i zamknac potem ta pokretlo.
Bardzo dziękuję za szybką odpowiedź, jutro nad tym popracuje według tych wskazówek. Serdecznie pozdrawiam
Reset zielonej kropelki nie pomógł. Próbowałam też przekręcić pokrętłem i wcisnąć przycisk kawy- nic nie dało... :-( można jakiś kontakt do Pana?
Despite full water container the red exclamation is on and machine does not draw water... any ideas? (Tried tapping on it, making sure water is well connected, touched the grinder, cleaned the inside as on this video)...
Nothing unusual. 1. Turn froth knob on and off. Make sure it's in OFF position. 2. Sometimes when you add water or coffee when machine is off it will not detect it. Restart it. See if that helps.
Thanks! How to do the descaling?
ua-cam.com/video/OBJ_brJzizw/v-deo.html
hi. on my machine the top and bottom lights are flashing in red. if i turn off and on again, the lights are off and only the green for the water. all good. However, when i press the brew button, the top and bottom lights start flashing again in red and no coffee is brewed...any tip? thanks a lor
I usually remove all containers from both sides put everything on again and try to start over. Try turning froth know on and off. Also, you may have clogged dispensing line. Do you do descaling every few month ?
@@MaciejPiotrowski hi.yes every ca. 3 months. I love to anew place and the machine made 2 coffees and started with this new problem.i transported in the original bis and shouldn't be the issue. I had to remove the milk island and out back again...could this has something to do? As I said,not did make 2 coffees before the problem, and it was working flawless before the move...
@@Gledii I had similar blinking lights last week, but I didn't have enough coffee in top bin. It took me few min of opening and removing everything and turning all knobs on and off to reset it. Make a video clip and post it on you tube and send me a link so I can see it to help you better. I can't do much if I don't see the problem.
@@MaciejPiotrowski ua-cam.com/video/O9hMAieI-JI/v-deo.html.
Thanks for helping out
@@Gledii Looks like you have bit different model than mine. I think your grinder might be stuck casue I didn't see attempt to grind. Remove everything including coffee. Make sure you only use full beans and do not use dark coffee. Dark coffee is too greasy and will clog the machine. So empty everything and see what happens.
Come si chiama questo pezzo che hai smontato prima
Power on and goes to prime then stops flashing lights top and bottom. checked the pump and the solenoid all good. what else can be..
Did you find the solution, same problem here.
Thanks for sharing, it's very helpful :)
So a week ago I got a Seaco Odea coffee maker,it was a present for my birthday. The other day I made 2 coffee's,everything was perfectly fine. On the next day,the machine wouldn't make anymore coffee. When I turn it on,this icon that looks like a key,is flashing - green color. I know it shouldn't flash,it should just stay on. According to google:
Flashing quickly (multiple times per second):
The machine is too warm, dispense some hot water to cool down the machine.
There is not any hot water..? I did change it,tried anything but it just won't stop blinking. Please any fix for that? What should I do?
That icon shows if water temp if good. If you leave this machine on for too long it may start flashing. Turn it off after you make coffee. Also if you don't turn froth know all the way it may also flash. Hope this helps.
I havent turned on the machine for a week now,I just tried and that icon continues to flash. Tried changing the water again,still the same.Nothing works...
contact manufacturer then and see if you can see explanation of this error on their web site.
Ludogorets Razgrad I know what this is. When you turn the know on top of the machine that allows you to create steam is not turned all the way to off position. After you make a steam to froth milk, if you turn it off , but not all the way then the light might be blinking. My wife did this few times. When I turned machine on that light was blinking so what I had to do is to turn steam on to allow some water to come out until the light stopped blinking. Very important - after you use steam you need to release the feast of the pressure until just water comes out of froth tube. If you don’t before making more coffee, then you will damage pressure seals inside the machine. Hope this helps.
@@MaciejPiotrowski wow, I had the same error and this fixed it. thank you!
thanks really helped to watch a video
Hi good video. But a have other problem. Can you help?
what is it?
Thank you!
You're welcome!
My red ! flashes slow
same but flashes fast, could not find how solve in manual
Thank you so much
I took out and can not put back again.😭
Nothing new here does the master tell you, everything he said is written in the instructions.
Puoi parlare in Italiano grazie
Sorry but I don't speak italian. Turn on subtitles. Maybe this will help.