How about, IF I was driving that truck, I would be smiling ear to ear, someone put a lot of hardwork into that truck, people should be jealous, I know I am!
I'll take the stock gtr with ac over the purpose built race car that can't take a corner. Also gtr guy didn't even look to have done the cars launch control, lol.
@@saysbadman he could easily add ac. Most these guys don't bother with it. But I know alot of guys in Texas who daily drives setups just like that and they all have ac.
@@trentdaddydolla647 that is a horrible daily driver. I mean anyone can do anything, but no ac, skinny front tires, everything cut out to save weight, terrible gas mileage, and the whole thing is rigid enough to shake your fillings out... Don't even try to drive it in the rain. It is a one trick toy.
@@jamestgilkey75 This is partially true, Yes they cast their own blocks BUT Grainer and Warrel provide the original FORD Casts and they are modified from there. The Chromosomes of the Koenigsegg V8 is indeed a Ford design albeit Strngthened to sustain almost 2000hp in stock form. This is evident by the Displacement they use. You can only squeeze so much out of the cast before you lose structural integrity.
I'm being reductionistic here, but this is what happens when you strap a roll of tin foil to a jet engine. The weight to power ratio has got to be insane.
I own a Chevy S-10 V6 Vortex "02"...best dang vehicle I have ever owned...still running. I try take good care of it...but it's one heck of a truck...still has lots of get up and go. I'm an absolute Chevy woman...always will be as long as they build Chevrolets..!!!
@@einTap_R6 its hilarious. Wait till they realize muscle cars can be rice or even worse tell they get beat by a civic with half the amount of money put in it
videos like this keep my spirits high, im building a 92 s10 working on the motor right now going with a zz4 355 small block with edlbrock e210 heads .650 lift, will be full roller with short travel lifters matted to a th400 short tail with a 3500 stall. Hope to give some of the tunners around here a run for there money.
Building an L33 with about 10.5/1 CR n/a at first and trying to decide what i really want to put it in. I think you may have sold me on these square body S10s! Beautiful build!
It's a one trick poney that can't leave the strip. Not even street legal. Take both cars to a real track that requires more than just a gas pedal and see how real racecars are built.
When the orange car does its burnout and then this truck just RIPS it up, I knew that was going to be a fun race to watch That launch with that supper quick brap brap I could listen to that all day
It really wouldn't be terribly hard or expensive to make it handle and stop really well while still laying down excellent track times. I know because I plan on doing those very things with my turbo LS S10.
Welll done ✔️ that's a mean Dime bro. Thanks for sharing this video, it's inspirational for me and my s10 Durango extended cab, I'm going to v8 swap and try to make my own carbon fiber parts for a super sleeper 👍🏻
@@ifindmetal He never said it was ONLY $300. He said he got the engine for $300 at a junkyard and a lot of Ebay parts. This is where listening and comprehension comes in.
@Alexander Rapp boost is boost, engines don't really care if its a blower, spray or a turbo, you typically need high octane and a strong bottom end and all the power you want is yours if you tune it right. There are n/a cars running faster 1/4 times then this truck, so saying non boosted meaning no spray is disingenuous
Imagine driving the junkyard turbo LS across the country to visit family. Everyone is comparing a purpose built budget race truck to some rich dudes daily driver. Doesn’t matter if he’s racing lambos or Porsches, put him against Brett Lasalles “purpose built” mustang. Snot rocket 2.0 and see how he fairs.
Does anyone know where I can find him to follow the build. I am going to be tearing down my gmc s15 an want to do similar build an I like how he has the engine bay set up
I love the LM7.... Vortec not an LS in stock form .But very similar. I'll give you that essentially becomes an LS after you build it... My only other real problem is why not just build the truck that the engine comes out of the 99 to 2006s saucy GMT800 goddess.... the greatest half ton truck ever created by mankind fight me if you don't agree
It's not always about how much money you put into something.... being knowledgeable goes a long ways...
Amen
Yeah , ok,, you put 200 in your motor and I put the money in my motor to make it a contender then we can hook it up, iam just living in reality
🥜🥜🥜
Not true
@@AhmedKhan-iv3fc that's an ignorant statement dud
Love seeing the junkyard builds ripping it up
To all the comments of "if this or if that." Doesn't matter, they were all there at the strip doing quarter miles.
How about, IF I was driving that truck, I would be smiling ear to ear, someone put a lot of hardwork into that truck, people should be jealous, I know I am!
Lol Jimmy. Also.. the ifs are internet kids that are obvious petrol heads without money. Just ignore them
Old school taking it to new school. Ain't pretty but getting it done!!!
I was there, this truck was awesome.
Lier
@@402gchris *Liar 🥸
That's my truck, thanks for coming out to watch me..
Eargasm at 1:26 is all i can say
@@antoniotrew5894 no it's not
This is what I'm talking about. LS in a S10!!! Chevy has always been hard to beat with reasonable, available parts.
I'll take the stock gtr with ac over the purpose built race car that can't take a corner. Also gtr guy didn't even look to have done the cars launch control, lol.
@@saysbadman he could easily add ac. Most these guys don't bother with it. But I know alot of guys in Texas who daily drives setups just like that and they all have ac.
@@trentdaddydolla647 that is a horrible daily driver. I mean anyone can do anything, but no ac, skinny front tires, everything cut out to save weight, terrible gas mileage, and the whole thing is rigid enough to shake your fillings out... Don't even try to drive it in the rain. It is a one trick toy.
@@saysbadman lol no I don't mean that type. These are full interior vehicles I mentioned
@@saysbadman any day
The 2nd pass the s-10 runs in the 9's @ 150mph.Thats fast!
As an owner of an S10 with a Camaro engine, this made my day. Badass 🤘
How many ponies you got in that engine. I'm just asking cause I have an s10 and if you mod the 4.3 enough you can get 700HP
@@MOPARBABEHhow
@@Ty-17a lot of people make 600 wheel out a 4.3 vortech with a turbo jus need injection
@@Braxtondagoatt any turbo suggestions?
That thing is in a class of its own. Incredible
He's straight dusting their asses
I bet that S10 is lighter than everything except maybe the Neon.
That neon granaded after a couple passes
Lol it’s literally a box on top of sheet metal😭😭I’m in the process of swapping one rn
Probably lighter than the neon, the stock 4cyl 5 speed 1st gen short box weighs 2,600 lbs. With fibreglass they can get really light.
This is why I love Chevrolet you can build horsepower in a fucking garage For cheap and beat $100,000 + cars
Same can be done with a Ford.
Take 10k each you can make way more power with a Chevy than Ford
@@tylerwidmer7088 very true, only dedicated racecars and brands like Koenigsegg use Ford tech.
@@jaybomb5022 they are definitely making their own engines now...they needed .ore horsepower.
@@jamestgilkey75 This is partially true, Yes they cast their own blocks BUT Grainer and Warrel provide the original FORD Casts and they are modified from there.
The Chromosomes of the Koenigsegg V8 is indeed a Ford design albeit Strngthened to sustain almost 2000hp in stock form.
This is evident by the Displacement they use. You can only squeeze so much out of the cast before you lose structural integrity.
Imagine dropping 100k on a car just to get smoked by something they pulled out of a scrap pile.
But guess who drove home ha
Not rly its turbo’d and LS swapped so not a junkyard car lmao
@@solace6685 it says junkyard 5.3..
Imagine thinking a 9 second grudge car didnt cost 30-40k to build
Imagine thinking that's actually a $300 junkyard engine
I'm being reductionistic here, but this is what happens when you strap a roll of tin foil to a jet engine. The weight to power ratio has got to be insane.
Nailed that timing against the GTR
That's What it all comes down to!!!!!!!! Timing/weight/speed!!!!!!!!
Dude yea he got a perfect start.. truck was flying
I own a Chevy S-10 V6 Vortex "02"...best dang vehicle I have ever owned...still running.
I try take good care of it...but it's one heck of a truck...still has lots of get up and go.
I'm an absolute Chevy woman...always will be as long as they build Chevrolets..!!!
Sweet truck. I’m building something very similar right now.
He did a beautiful job with the induction, the turbo and the exhaust. It's a mean little truck. He could give the farm truck full size competition
Keep cooking them ricers baby!!! MURICA
Ricers? Where lmao some people don't even know what that term means and it's kinda funny
@@einTap_R6 its hilarious. Wait till they realize muscle cars can be rice or even worse tell they get beat by a civic with half the amount of money put in it
Dodge Neon, Dodge Durango... Ricers
Sweet truck, cool to see the guys from ZZP trackside.
Great job on your truck man very impressive!! That truck just flat out hooks up and goes.
videos like this keep my spirits high, im building a 92 s10 working on the motor right now going with a zz4 355 small block with edlbrock e210 heads .650 lift, will be full roller with short travel lifters matted to a th400 short tail with a 3500 stall. Hope to give some of the tunners around here a run for there money.
They still make those zztop motors🤔?
That takeoff is amazing
Building an L33 with about 10.5/1 CR n/a at first and trying to decide what i really want to put it in. I think you may have sold me on these square body S10s! Beautiful build!
Demonic Truck right out of HELL! SUPER DOPE S10! Keep bringing back all the Old School rides to show them new cars how it's really done!
Yeah this is nuts $300 junkyard LS.
Bullcrap ,, I guarantee you that ain't no 300 dollar junkyard engine
@@danonoveh8114 he bought the engine for $300 at the junkyard then added the turbo and a bunch of other new parts to it, to make it ALOT faster.
@@danonoveh8114 nope got a million dollar intake
@@bikeconnectionbmx intake is not needed at all. $800 for the intake last I checked. He still probably has less than $2k in this engine
Love that it's a junkyard build and smoked cars that cost over 100k
It's a one trick poney that can't leave the strip. Not even street legal. Take both cars to a real track that requires more than just a gas pedal and see how real racecars are built.
Goes 2 Show U👍U can Have A fast Vehicle And Not Spend a Lot of Money 💵
A fast vehicle that only goes in a straight line💀
@@diegomj11 you can build a time attack car look it up
You still have to have money to build a fast vehicle, especially one that looks that good
Chicks would rather ride the GTR bro
A power glide isn't exactly cheap
Just bought a s10. Pops got a lsx in his old el camino. He’s so excited to dust the little kitties at the track😎😎😎
When the orange car does its burnout and then this truck just RIPS it up, I knew that was going to be a fun race to watch
That launch with that supper quick brap brap
I could listen to that all day
That made my day.....there's still hope for my Chevy.
11.7 GTR 1/4 mile omg whoever owns that needs to sell it. With that being said 9 second S10 is impressive.
Wanna buy it from me ?
@@landonmicheal7995 do you own it?
No launch. And I'm not sure what they run stock, but 11s is no slouch
@@august7324 he definitely doesnt
Just like animals
I'm glad that motor went to a good home 😊
I'm not into racing but I think I'm missing out on some cool shit...this guy kicked ass!!
Im going to build a s 10 I want to put twins on it.
Love the Build and talent. Great content 👌
DAMN IMPRESSIVE!!!!!!! Good job!
Built not bought right there
Tesla plaid times
@@seanmitchell3782 didn’t think of that. Pretty much spot on
@@DragRacingandCarStuff yea that’d be a great race.
@@DragRacingandCarStuff but still, $130,000 vs $5,000 haha
Dude this thing is a wicked sleeper! Made that mustang look like it was standing still
What mustang lol
I was wondering what mustang myself. Seen a gtr, a dodge neon,and a dodge Durango.
That truck is awesome and it's doing the Quarter mile times that the tesla model s plaid is doing incredible
Was just thinking that, would be a cool race to see them line up
Dang that truck is insane especially since its got a junkyard motor in it and not some brand new built crate motor like most builds do
😂😂😂😂 LAWDDD THAT SECOND RACE!!!! 💯🔥 LS NATION!!! LOVE THIS TRUCK!
Not a GM fan but hats off to anybody that can embarrass a overpriced import.
GTR was made for high speed turns not drag strip.
Looks like it's really meant for sitting in parking lots. Get out of here with your excuses
@@neeper666 it's got 500hp and launch control.... it should do fine on the strip.
@@neeper666 GTR's get built for the strip, not the track. They are pigs, and don't handle well on the track.
@@fitron5th funny that the gtr is a better track car than the corvette
Wicked little truck! Thanks for posting
Further proof that you can make anything fast in a straight line when neither turning nor braking are of concern.
You clicked on the video b
itch
It really wouldn't be terribly hard or expensive to make it handle and stop really well while still laying down excellent track times. I know because I plan on doing those very things with my turbo LS S10.
@@bryantb3391 Auto play exists...
@@rmp5s So does the button to turn it off 📴
@@rmp5s I'm pretty sure the truck made the corner waaayyyy before the GTR 😂
Everybody needs a Bowtie.Just does the job
Didn't need to spend lots of money to go fast.👍 (LS)
Hooks up nice!
I have an 87 s10 durango can't wait to v8 swap it I'm also from Mi hope to see this truck around
Welll done ✔️ that's a mean Dime bro. Thanks for sharing this video, it's inspirational for me and my s10 Durango extended cab, I'm going to v8 swap and try to make my own carbon fiber parts for a super sleeper 👍🏻
Thank you. Nice… good luck with it!
The way he left on that GTR was nasty asf
I luv it when hard work beats money. Thats good ol' American made muscle!! 💪
Vroom vroom Bitch!!!
Had a 5.3 there fast in stock form...and i knew if his set up is real sweet. It would be really fast and is.....
There is more than just a $300 junk yard engine there Cams , valve springs, injectors , turbo etc he spent more than a little there
Still not a ton of money
The link in the description he pretty much priced out his 9 second Camaro. Around 6k total
@@mason3742 not $300 either
@@mason3742 5-7k ain't a lot of money. Especially compared to a GTR cost. I've spent 5k just on turbos.
@@ifindmetal He never said it was ONLY $300. He said he got the engine for $300 at a junkyard and a lot of Ebay parts. This is where listening and comprehension comes in.
CHEVY FOR THE WIN ✊🏼
Baddass little truck !!!
The trucks acceleration is incredible
0:17 you mean former V6 Firebird, not Trans Am. That threw me for a loop until I read it a couple of times. 😂
Dang, yeah my bad. Lol.
That pickup looked like it was 100lbs🤣🤣🤣
Gtr needs a driver mod, when it launched it fell flat on it's face
My 300hp Challenger could probably beat that GTR...Driver 😂
What kinda launch was that?
That's what happens when they dont get enough time to setup launch control
@Alexander Rapp did you watch or read the video title? Its got a 92mm turbo, and is probably pushing 20+lbs of boost.
@Alexander Rapp GTR did 11.75 not 11.175..
@Alexander Rapp boost is boost, engines don't really care if its a blower, spray or a turbo, you typically need high octane and a strong bottom end and all the power you want is yours if you tune it right. There are n/a cars running faster 1/4 times then this truck, so saying non boosted meaning no spray is disingenuous
Specs of motor please what all does it have in it looking to do a 5.3 swap in my gmc 2dr blazer
Nice build man, keep it up!
That 2nd run was so much better. I was thinking how is this thing barely running a 10 on the first one.
Was it stock besides a cam? Or rod/pistons etc...?
Is this stock height? or slightly lowered?
TIA
the transmission on the truck, AWD or RWD?
Dam that truck got big muscles really big
Smoked that hellcat....I love it
How in the world did this guy pull that off. Got to love GM. Mopar guy must be crying 😂 after that one 🤣
What fuel pump are you running
That durango wasnt being serious was he????
I had a 86 Chevy S10 and tbh love them old trucks mines was a lowrider I made it in to it when I was in high school
I wanna know what the comp on the motor is
Low buck fast is my favorite kind of fast.
That truck is dialed in …..👌
That thing hooks like it's on glue. Those tires... How? So skinny!
I’m thinking of ls swapping my 1999 ford ranger
That truck is coming off the line like a bullet out of a gun
Did the S10 jump start or does he have bump into the start line because of the turbo?
Turbo
Imagine driving the junkyard turbo LS across the country to visit family. Everyone is comparing a purpose built budget race truck to some rich dudes daily driver. Doesn’t matter if he’s racing lambos or Porsches, put him against Brett Lasalles “purpose built” mustang. Snot rocket 2.0 and see how he fairs.
is that a built 5.3? or is it stock ?
I love it beating them with that old S10🙌🏽
There ain't nothing junk yard bout that 5.3 anymore lol
Cam, valve springs, intake, eBay headers. Never took the heads off my guy.
Btw Ls Motors are capable of having ac with those 500+ hp😎
How much hp?
Nice 👍🏾 love the 5.3 …I have that in my Trailblazer..but I wish it was turbo 😂🤣🤣💪🏾
Let's make it happen lol, I have a turbo for sale
What's the 0-60 on this thing?!
Goodness gracious!!!! That's all I could say
Is that a Honda radiator
Terrified in my 88 s10 at 62 mph.. I can't imagine
Ed Cole strikes again!
Nothing is better at being a hammer then a hammer!
Simple, compact and stone reliable!
Thanks again Mr. Cole!
That thing MOVES
Does anyone know where I can find him to follow the build. I am going to be tearing down my gmc s15 an want to do similar build an I like how he has the engine bay set up
That’s my dad 😂
Damn..what a truck!!❤️
How did bro get a 5.3 for 300 dollars?
I love the LM7.... Vortec not an LS in stock form .But very similar. I'll give you that essentially becomes an LS after you build it... My only other real problem is why not just build the truck that the engine comes out of the 99 to 2006s saucy GMT800 goddess.... the greatest half ton truck ever created by mankind fight me if you don't agree
Awesome truck👍🇺🇲
Dang fast junkyard shit !!!!!!!!!!!!
I want that grille we’re did you get it?
Ebay
Imagine a suited up Gtr 🥶🥶
tuff it took an L 😆
Wow‼️ An old S10 powered by a $300 junk yard engine beats a $100grand import? How humiliating ‼️🤣🤣
Does he have any social media? My build is extremely similar and I have a couple questions of how he routed some stuff
Not that I know of.