To long must be a shorter way. Try again and must be shorter than a minute, time is money and i understand that quality is priceless, i wish I was there to help you....keep trying ,,, thanks for video
Bro. Most of my latest videos are 1 or 2 minutes. The problem is some viewers ask for longer videos. Myself prefer shorter videos. Thank you for the suggestion.
As welded caps.. you will never really be able to tell 100% where the center is, without being able to see the root weld.. welds can bias the welds as they are welding, and might put an extra bead on one side or another for a number of reasons.. such as to blend hi-lo..or internal transisions..
what I've found is that if you do the math, 16- 10-3/4=5-1/2. divide by 2 and get 2-5/8. I would get a 2 inch block and a 5/8 plate stacked atop each other. push the eccentric against a piece of h beam so it doesn't show a gap and roll it until it sits atop the 2-5/8 metal just past the bevel. mark the eccentric along the straight part at 8 inches. place the 16 inch side on the table and use a square to make a line at the mark. works every time for me.
Good
Thank you Bro.
Good day & good morning sir...thank you forget explanation tutorial video 👍 mantap terbaik 👍
Thank you Bro.
Thank you for the good content
Glad you enjoy it!
The great 👌👍🙏🏼🎉👌👍🙏🏼
Thank you Bro.
interrested video ,carry on sir
Thanks bro.
Well done 👍👍👌👌
Thank you! Cheers!
Nice one
Thanks 🔥
🥰🥰🥰😋❤❤❤❤
Thank you Brother.
Thanks
Thank you Bro
Thumbs up
Thank Bro.
Hi, Could you please do a TIG sealgun root and FCAW fill/Cap? process. and any tips and experience you cna share?
Sorry Bro, no idea.
Can you do some weld tricks and tips on FCAW pipe welding
cutting and fitting a bull plug
Sure. Thank you for the suggestion.
Can you please create video to calculate the box dimensions for ecc reducer if its rotated at some angle say 30 or 45 degrees
i mean to show its dimensions in isometric drawing
Bro, sorry i don't understand your query.
Well done
Thank you.
Can you make videos on fabrication costing
Difficult. Because the cost of fabrication, depends the cost of material, labor cost, time duration and many things, specially in India. 🙃
@@technicalstudies.хХХ ХХХХХхХХХхХХххХХХх
To long must be a shorter way. Try again and must be shorter than a minute, time is money and i understand that quality is priceless, i wish I was there to help you....keep trying ,,, thanks for video
Bro. Most of my latest videos are 1 or 2 minutes. The problem is some viewers ask for longer videos. Myself prefer shorter videos. Thank you for the suggestion.
Can you do one on how to find center on butt weld caps!
I will add in my next video. Thank you for the suggestion.
As welded caps.. you will never really be able to tell 100% where the center is, without being able to see the root weld.. welds can bias the welds as they are welding, and might put an extra bead on one side or another for a number of reasons.. such as to blend hi-lo..or internal transisions..
Id the reducer is like 72" x 54" can't use right angles.
Yes. this method is limited up to 24 inches.
@@technicalstudies. Can you include method for large bore piping like 72/54inch.wouod be Great help
what I've found is that if you do the math, 16- 10-3/4=5-1/2. divide by 2 and get 2-5/8. I would get a 2 inch block and a 5/8 plate stacked atop each other. push the eccentric against a piece of h beam so it doesn't show a gap and roll it until it sits atop the 2-5/8 metal just past the bevel. mark the eccentric along the straight part at 8 inches. place the 16 inch side on the table and use a square to make a line at the mark. works every time for me.
Is simple sistem
Thank you.
😲😲😲💥💥
Thank you.
Its called reducer no matter direction of glow
Bro. Please suggest me a topic please.
All things you show quiet correct, but it takes so long time:(
Bro, some viewers😅 say the videos are too fast.
@@technicalstudies. Ha, it's really night audiobook, make elbow marking, please.
@@TheFukuzener Yap. Sure.
Kulang Hindi mo tinuro kung paano Gawin.
Bro I am sure marunong ka ng english. Mangyaring panoorin ang video, mas maingat.
It was not a very clear explanation. 😢
Sorry Bro, if you dont understand it.