Installing mine today 💪. Powdercoat guy kept saying how impressed he was with the welds and construction, guess he's seen a lot of garbage. Always good to hear, thanks for the good work!
Not sure if anybody else had problems with the sensors, but cause the metal is thicker, the added pressure broke off the external retention ring (which you can't buy separately). So might be worth shaving down the OEM retention clip?
Why not unbolt the 4 bolts holding to the frame on each sides and pull complete bumper off? A lot of unnecessary work. All bolts can accessed from below.
Thanks. Just curious. Why did you remove so many screws? Just disconnect the wires and the six bolts holding the bumper brackets to the truck and remove the entire bumper as an assembly? No need to remove the grill either.
Okay so I want this style bumper...but for 07-13 Model Tundras. I know they are very similar in design but wouldn't want to risk it, would be cool if this fit 07-13 or a design like this was adapted for 07-13 Tundras.
What if you have a trd pro skid plate drop kit? Installed a diff drop so had to get a spacer kit to make the trd pro skid plate fit. How would the lower bumper support fit?
Installing mine today 💪. Powdercoat guy kept saying how impressed he was with the welds and construction, guess he's seen a lot of garbage. Always good to hear, thanks for the good work!
Not sure if anybody else had problems with the sensors, but cause the metal is thicker, the added pressure broke off the external retention ring (which you can't buy separately). So might be worth shaving down the OEM retention clip?
Why not unbolt the 4 bolts holding to the frame on each sides and pull complete bumper off? A lot of unnecessary work. All bolts can accessed from below.
Thanks. Just curious. Why did you remove so many screws? Just disconnect the wires and the six bolts holding the bumper brackets to the truck and remove the entire bumper as an assembly? No need to remove the grill either.
I wish you made these for the 2008 second gen Tundra.
Will this bumper fit on a 2020 Sequioa?
bummer to have to take those support brackets off to change the front diff fluid. looks solid though.
Will the stock fog lights fit into this bumper?
Wondering the same…
I like the non-rivet, low profile fender. Anyone know who makes that one?
Bushwacker makes OE low-profile fender flare, I've heard they are good quality.
Okay so I want this style bumper...but for 07-13 Model Tundras.
I know they are very similar in design but wouldn't want to risk it, would be cool if this fit 07-13 or a design like this was adapted for 07-13 Tundras.
What if you have a trd pro skid plate drop kit? Installed a diff drop so had to get a spacer kit to make the trd pro skid plate fit. How would the lower bumper support fit?
Why don’t you have a 4Runner Lopro install vid?
Does render the safety sense inoperable as the hoop likely is in line with the sensor for non-trd tundra applications?
Yes the bull bar would block the sensor on NON-Pro models. You would need to swap to a Pro grille or get the bumper without the bull bar
@@c4fabrication397 can we get that same bumper without the bull bar?
Buen video 👍🏿
I need this bumper !
Maaf mau nanya
Untk kijang kapsul ada riak. N harga nya berapa ya... teks..
Where can I purchase this bumper?
Where to buy this?
Will this bumper fit a 2020 Sequoia?