Mines a 67 Which holes did u use? Apparently the rear ones,soooo? That'd put the engine forward? Is it recommended to install the engine /transmission together?stock 4060 auto? 65,,,67 are same?Abodys?
I have a Genesis Coupe 2010 manual transmission 6 sbeed I would like to convert it to ls1 what parts do I need and where can I get them I live in Saudi Arabia
Howdie Wonder if ya Can help Me 6 litre LS engine into 1947 Dodge if ya Hav the Mounts Thks again and tranny Mounts too Hopefully ya Get Bk to Me Farmer
Is that the stock oil pan in the 65 Chevelle? I have a 67, would the stock oil pan from a Suburban, Tahoe, Sierra work? I see the stock exhaust manifolds fit. Thanks, great channel
Yea stock oil pan fits with a little notching of the cross member I think a f body oil pan would be better though. This one hangs real low. Also the manifolds I had on there were LS3 stock manifolds so truck ones might not
Im not sure I know BOP are different bellhousings than SBC so I don't know if mounts are different as well. I would look up the sister GM vehicle and see if the mounts are interchangeable
I used that set up in my G35 swap. I custom fab the lower mount to the 3 bolt mount.
subd... I'm about to ls swap my Ford ranger and these videos answered some questions i had thank you so much!!
How is your swap going? been thinking about doing my ranger
Very good video very detailed. Believe it or not your video is better than the REP at Summit Racing. I was even more confuse after watching him
Thanks ! I appreciate it
Tell summit to sponsor me for a video next time 😂
Awesome channel, my 88 f150 thanks you.
Thanks for watching!
Do you have a video on putting a 4l60e or 4l80e in a car? I'm doing a 69 impala. What do I need for a transmission mount
Mines a 67
Which holes did u use?
Apparently the rear ones,soooo? That'd put the engine forward?
Is it recommended to install the engine /transmission together?stock 4060 auto?
65,,,67 are same?Abodys?
One more question.
Can I keep my intake?
I Mean will the 03 Yukon intake
Fit under the hood of my 67 Chevelle?
I have a Genesis Coupe 2010 manual transmission 6 sbeed I would like to convert it to ls1 what parts do I need and where can I get them I live in Saudi Arabia
New fan please finish the how to
Howdie Wonder if ya Can help Me 6 litre LS engine into 1947 Dodge if ya Hav the Mounts Thks again and tranny Mounts too Hopefully ya Get Bk to Me Farmer
When you do a ls swap. When you take all the wires out of the harness like evap and so on, do you have to have the pcm programed .
Yes mostly because of VATS, which is the Vehicle Anti Theft System. If it isn't disabled the engine will only start for 1 second and turn off
Is that the stock oil pan in the 65 Chevelle? I have a 67, would the stock oil pan from a Suburban, Tahoe, Sierra work? I see the stock exhaust manifolds fit.
Thanks, great channel
Yea stock oil pan fits with a little notching of the cross member I think a f body oil pan would be better though. This one hangs real low. Also the manifolds I had on there were LS3 stock manifolds so truck ones might not
What is ls3 exhaust?
Which work best for 1998 Firebird v6 to ls1
I want to do an LS swap into my 68 mercury cougar, whats your recommendation for that?
Sell the Cougar. Buy something that came with a SBC. 🤣🤣🤣
What I need for my 96 extended cab ram 1500 shortbed
Any vehicle? How about a 1969 Chevy 2x4 converted to a 4x4? Or any 1972 4x4 and older?
Easy. The LS is dimensionally similar to a small block Chevy
Ok what setback was that in the car?
Do you know what I can use for a 07 h3 hummer I 5 to ls 5.3
Probably cut and weld mounts. The alpha had a 5.3 so the other option would be to find a alpha subframe
how about in a 65 Buick Riviera?
Sure. Same idea.
i have a 70 olds 98 that had a 455 in it will this work for it
Im not sure I know BOP are different bellhousings than SBC so I don't know if mounts are different as well. I would look up the sister GM vehicle and see if the mounts are interchangeable
@@JovaniDanteGriego whats the sister GM lol
70 Cadillac eldorado. But again the engines might be different I don't know enough about that chassis
@@JovaniDanteGriego oh ok
Very informative. But man you need to clean up your Garage?🤔
Oh for sure. I do once a month. This was just at the end of 3 projects
That means he's busy. I'm sure he'd pay you to clean it
I bet he knows where everything’s located
Sometimes 😂