Check out more of my complete builds, walkthroughs, and HD-Foam at www.SKSProps.com Limited qty available to purchase in my etsy store www.etsy.com/listing/1022778357/behelit-beherit-berserk-beruseruku-egg?ref=listing_published_alert
This is just a head cannon I guess, when I read berserk I always thought of it like this. When the behelit is activated and the face screams, I always imagined the scream is in the voice of the holder of the behelit at that time. For example, Rosine’s behelit summoning scream would sound like a terrified little girl, Griffith’s would sound like his voice, Grunbeld would be his. You get the picture
Thanks! I do spray them with a primer and a clear coat. Not saying the paint can’t eventually run off but I consider them more an art or cosplay piece than everyday wear
Not to be crude, but does this mean Berserk will be unfinished? I’ve always seen bits of it and debated reading it, so I don’t know if I should read a manga without an end
The rumor online is he was working with a team and had road mapped and story boarded how the series should continue. Hope that’s true...regardless the series as is will blow your mind compared to other mangas out there.
It is my favorite manga. I would say, even with the possibility of no ending it is 100% worth reading. It's too good not to. Knowing what I know now, I will never regret reading and watching Berserk.
I hope your friends read berserk so you can show up to the next hang out wearing it. Or anyone close to you that reads berserk, and make sure to mention they are close to you.
I bought one myself as soon as I saw this video, about a year ago. Unfortunately, I was careless and the paint job was utterly ruined. Guess I’ll have to buy a second one and treat it with the respect it deserves… eventually. There were only nine in stock and 20 folks with it in their carts 😅
Thanks! and yes they are clear coated but they can still take damage in the description I list them as a collectible. I will have to add some more they have been very popular
My friend is a huge Berserk fan, & I showed him this video. We then had some ideas to make this next-level terrifying: incorporate those weighted doll eyes that open & close when you move the Behelit from vertical to horizontal. Worse idea to make literal Nightmare Fuel: Use a super soft, flexible silicone structure over top of a compact servo to make the facial features "shift" in addition to the eyes opening.
I just found your channel and after seeing this I immediately ordered both closed and screaming. Beautiful homage to Kentaro Miura. Easily the best behelit made ever. If you made Doom merch I would go broke 🥲
how am i year late to this video 😭😭 once I get my paycheck this month I'm gonna get one of the closed egg behelit, I'm so thankful for you to make a video about making this will contact you on esty really soon😎😎
Of course! I actually started a monster clay sculpt but after my 2nd vaccination I got really sick and found it easier to just sit at my computer and work for a few days
Because I have them for sale on my Etsy. Cast resin is much stronger and a cast takes less than 10 minutes to cure vs hours of printing. I can make 20-30 of them in the time it takes to print 2
That is so awesome! all of your works are amazing! You deserve much more recognition :)) Thank you for putting so much affection in what you bring to us!
Just checked out the Etsy Closed Behelit had 3 in stock and 20 people ordering it Would you be willing to put more Behelit stock up on your Etsy store or will these be the last few?
@@SKSProps Bought one over Etsy on the 8th of July, it's finally made it to Sydney Shouldn't be too long before it reaches Western Australia And again man I super enjoy and appreciate the content and effort that goes into these builds
Good question 👍 The primer bites into the resin a bit and smooths it out it also fills in the very small steps in between the print lines. The primer is softer than the resin so when you wet sand high points (primer) is sanded smooth and matches the resin surface
The tip on using Legos to build mold boxes for smaller pieces is genius!!! I always learn something new from your tutorials - thank you for your knowledge!!!
Hi SKSrops, i´ve bought the normal eyes closed version a couple of months ago, but i wanted to get the open eyes now. Is there any chance getting it again on your etsy store or something? I really want it hahahaha
Could you please give A link or some way to access that model you created so I could print it out myself if you would mind, I want to make it for one of my friends who is insane berserk fan Who keeps blabbering on about this
No You wouldn’t ever want to do that with oomoo the tensile strength is way to low, maybe if I had used mold max 30 but I didn’t have any on hand at the time
Check out more of my complete builds, walkthroughs, and HD-Foam at www.SKSProps.com
Limited qty available to purchase in my etsy store www.etsy.com/listing/1022778357/behelit-beherit-berserk-beruseruku-egg?ref=listing_published_alert
Pls make the new Captain America shield (Falcon version)
Omg! this BEHELIT T-shirt is so cool 😍😍 :
www.amazon.com/dp/B099NFP145
this one is for the fanatics 😏 :
www.amazon.com/dp/B099JZSZZJ
Make more plzzzz
Kentaro Miura
1966 - 2021
Such genius man with an awesome story.
Agreed 👍
fax
I don’t know what this really is but it still looks good
Thanks! If you ever get a chance check out Berserk
I saw the video photo yesterday on IG but I didn't thought that now this video would have such emotional charge, it is such a homage from you
Thanks man not gonna lie I was really sad painting this morning, but I'm glad I could make something to honor his memory
Omg! this BEHELIT T-shirt is so cool 😍😍 :
www.amazon.com/dp/B099NFP145
this one is for the fanatics 😏 :
www.amazon.com/dp/B099JZSZZJ
Such a beautiful piece. You have done the series a great justice.
Liked and subbed.
Thank you very much!
This is just a head cannon I guess, when I read berserk I always thought of it like this. When the behelit is activated and the face screams, I always imagined the scream is in the voice of the holder of the behelit at that time. For example, Rosine’s behelit summoning scream would sound like a terrified little girl, Griffith’s would sound like his voice, Grunbeld would be his. You get the picture
I really love your videos :) even if they like in this case is of something i would probably never try. Thanks!
Thank you! And you’re welcome! 👍👍
I don’t normally get too drawn into manga and anime.
But for some reason the Behelit chills my spine
Same! I remember reading the eclipse scenes for the first time and was like...what...the...hell!
Absolutely amazing. I'm planning on getting the closed one off your etsy soon. Great work.
Thanks!! 🙌
Great job on making these, 100% the best ones I’ve seen so far also I was wondering how durable they are for casual and cosplay wear.
Thanks! I do spray them with a primer and a clear coat. Not saying the paint can’t eventually run off but I consider them more an art or cosplay piece than everyday wear
@@SKSProps Thanks for replying definitely gonna buy one next stock!👍
Beautiful work.
Thank you very much!
Not to be crude, but does this mean Berserk will be unfinished? I’ve always seen bits of it and debated reading it, so I don’t know if I should read a manga without an end
The rumor online is he was working with a team and had road mapped and story boarded how the series should continue. Hope that’s true...regardless the series as is will blow your mind compared to other mangas out there.
It is my favorite manga. I would say, even with the possibility of no ending it is 100% worth reading. It's too good not to. Knowing what I know now, I will never regret reading and watching Berserk.
Oh man, that paint job is fantastic, not complicated but gives it so much life and dimension!
Thank you very much!
Looks absolutely amazing, I really wanna buy one but I don't get paid 'til Tuesday sadly, is there any chance that they'll still be available by then?
Thank you very much! and It all depends on how many are purchased but I think you'll be ok
I hope your friends read berserk so you can show up to the next hang out wearing it. Or anyone close to you that reads berserk, and make sure to mention they are close to you.
Yep, lots of berserk fans here
just ordered screaming behelit says it will be here around september 20th. so stoked!
I bought one myself as soon as I saw this video, about a year ago. Unfortunately, I was careless and the paint job was utterly ruined.
Guess I’ll have to buy a second one and treat it with the respect it deserves… eventually. There were only nine in stock and 20 folks with it in their carts 😅
Thanks! and yes they are clear coated but they can still take damage in the description I list them as a collectible. I will have to add some more they have been very popular
Gives me the creeps.. I want it
Awesome video! You did amazing work on it. I’m currently making a behelit from super sculpey firm, which matte spray do you recommend?
Thanks! Usually Krylon is my go to 👍
My friend is a huge Berserk fan, & I showed him this video. We then had some ideas to make this next-level terrifying: incorporate those weighted doll eyes that open & close when you move the Behelit from vertical to horizontal.
Worse idea to make literal Nightmare Fuel: Use a super soft, flexible silicone structure over top of a compact servo to make the facial features "shift" in addition to the eyes opening.
A really great build. they always gave me the creeps in the anime and I think you have done them justice.
Thanks Wayne I really hope these honor his memory
I just found your channel and after seeing this I immediately ordered both closed and screaming. Beautiful homage to Kentaro Miura. Easily the best behelit made ever. If you made Doom merch I would go broke 🥲
Awesome! And thank you very much! 👍👍
Uma legenda em português BR caía bem!😭
Eu queria que fisesem um behelit vivo
how am i year late to this video
😭😭
once I get my paycheck this month I'm gonna get one of the closed egg behelit, I'm so thankful for you to make a video about making this
will contact you on esty really soon😎😎
Thanks 🙌
Using the beads as a measuring device is great! I love it.
Sometimes the simplest solutions are the best 👍
Can you please make the berserk armours helmet
I know it would be a pretty big build but you should make Guts' Dragon Slayer or one of the swords he used during his time in the band of the hawk
Those are on my list as possible builds just don’t know when
Any chance you'd be willing to sell the STL file?
At this time I'm just going to keep them as a limited run but that might change in the future
@@SKSProps regardless you have my money
Nicely done on the build. Series was good but very dark at times.
Very dark and Thanks!
i use to collect from art of war. these look really good and it was amazing watching you create it.
Thank you!
Could this be done without a 3d printer? Could I scult models in clay to make the mold?
Of course! I actually started a monster clay sculpt but after my 2nd vaccination I got really sick and found it easier to just sit at my computer and work for a few days
why did you do all of this when you could of just keep using printer?
Because I have them for sale on my Etsy. Cast resin is much stronger and a cast takes less than 10 minutes to cure vs hours of printing. I can make 20-30 of them in the time it takes to print 2
So that is how my Betchi was born
That is so awesome! all of your works are amazing! You deserve much more recognition :))
Thank you for putting so much affection in what you bring to us!
Thank you very much!
When will you release the stl?
why i can't find it in your website? how much it coast to buy it
I don’t sell them anymore I got a C&D from crunchyroll
Pls make the new Captain America shield (Falcon version)
Just checked out the Etsy
Closed Behelit had 3 in stock and 20 people ordering it
Would you be willing to put more Behelit stock up on your Etsy store or will these be the last few?
I’ll restock it
But yeah they have been very popular
@@SKSProps
Bought one over Etsy on the 8th of July, it's finally made it to Sydney
Shouldn't be too long before it reaches Western Australia
And again man I super enjoy and appreciate the content and effort that goes into these builds
What’s the purpose of spray painting and then sanding?
Good question 👍 The primer bites into the resin a bit and smooths it out it also fills in the very small steps in between the print lines. The primer is softer than the resin so when you wet sand high points (primer) is sanded smooth and matches the resin surface
The tip on using Legos to build mold boxes for smaller pieces is genius!!! I always learn something new from your tutorials - thank you for your knowledge!!!
You're welcome! I am so glad I can share these experiences with the community!
@@SKSProps We are all so grateful that you share so much with us!!!
I am going to buy both versions tomorrow and I hope the quality is as I expect
Thanks!
@@SKSProps I just got them and I love them
BERSERK ARMOR PLEASE
Hi SKSrops, i´ve bought the normal eyes closed version a couple of months ago, but i wanted to get the open eyes now. Is there any chance getting it again on your etsy store or something? I really want it hahahaha
Unfortunately they shut me down and the molds were on their last leg so I didn't remold them for sale
@@SKSProps So it´s never gonna get a restock? :(
@@andrej5311 unfortunately no
I want to buy some, are they still for sale?
No I got a couple of C&Ds from crunchy roll and they shut down my listings
Here we go.
beautiful
Thank you! 😊
Could you please give A link or some way to access that model you created so I could print it out myself if you would mind, I want to make it for one of my friends who is insane berserk fan Who keeps blabbering on about this
I don't offer this model to the public but I'm sure you can find some versions to print online
Thank you very much for this information
just bought the closed eye one ! reading berserk for the second time right now.
Fantastic! It’s such an amazing story
15:53 our faces when we heard the bad news
Yep 😢
Great build, but why go through resin casting when you already resin 3D printed them?
So that I can make multiple copies quick
You could've done a one piece mould, and cut down the back. Check out RobertTolone
No You wouldn’t ever want to do that with oomoo the tensile strength is way to low, maybe if I had used mold max 30 but I didn’t have any on hand at the time
just out of curiosity how come you make a mold if your already 3d printed them?
Because then I could easily replicate them using smooth-on high impact resin which paints better than printer resin
This looks awesome
Thank you very much!
Rest in peace, Kentaro Miura
now spawn the demon
I kinda need my eye and left hand to keep building 🤣
this is a great video
Thank you! 👍
I’m buying this
Unfortunately I recently got a C&D from Crunchyroll so I can no longer sell them
I have been a big fan of Berserk for a long time. I am so blown away by how awesome these look. I would love to have a set.
Thank you very much!
Just put in an order for closed and screaming :,) thanks my dude I’ve been looking for something like this
Thank you for the support and I’m glad I could make these for the Berserk community 👍
@@SKSProps got mines in yesterday (both versions) and I love it! Can’t wait to sacrifice all of my friends :)
@@thesaucefather1017 Fantastic I’m so glad you like them!!
Could I build a charcuterie board with this design? Would I be infringing upon anybody
You can build anything, you just can’t sell it. That’s when it becomes infringement
Thank you I just bought them both 🖤
That's great! Thank you so much!
Best looking Behelit I've seen.
Thank you very much! 👍👍
Just ordered one today!
Awesome! 👍👍
Estan hermosos!
Thank You!
Well done good sir!
Thank you very much Phil!
Tác phẩm này trông hơi sợ
Very scary! 👍
Can i have the 3d printed one for 2 dollars pleaseee im begging😭
🤣 no I don’t even sell them anymore Crunchyroll gave me a C&D
Damm i want em so bad😭, also yours are very detailed you definitely nailed them im really impressed
Those are....balls??