You can "glue" aluminum alloys such as AS5GT, AG3 or AG5 or AG7 as you do. You can also succeed on aluminum, although this is more problematic because the melting temperature is critical, but other alloys such as AU4G will be absolutely unbendable with this process. Certain other predominantly zinged alloys will be brazed with tin. Your system works well with cast aluminum alloys. Bravo for your expertise, it's a fine job!
Еще с конца 40-х годов, таким способом исправляли огрехи литья картеров мотоцикла К-125 на ковровском заводе ЗиД (ИнЗ-2), когда еще не было освоено литье под давлением. Там вся сложность была в подборе состава флюса, под конкретный сплав детали и присадка.
I first learned how to weld aluminum using aluminum welding rod and a special white paste flux. I used oxyacetylene. It is very important to use a slightly carburizing flame, no excess oxygen. Once I purchased a TIG system, never went back. Using gas though, if I were out in the boonies, had nothing else to work with, it was an option. I've also welded pot metal pulleys. Although pot metal is mostly zinc, I was able to mix aluminum with it and got useful results.
There are fluxed aluminum brazing rods sold now that have good reviews. I want to weld up those leaky rivets on my old Jon boat. I not sure how it will work out. So use a carbonizing flame?
60 years ago I seen my old man weld pot metal and aluminum he knew a hell of a lot about metal when he welded panels on car's it looked like it was done with a machine people could not believe how good his welding was.
Yea, I've seen the same thing (not my Dad, but someone I knew) If I remember right, he welded together the backpacks they carried on the moon. What an incredible guy and there were some really amazing things I watched him do. I watched him torch weld side panels back together with a large rod it only took him a few seconds. No warping I could see.
And few people still know this secret because of the lack of dialogue. It would be immensely useful if you communicated to us what the filler rod is you are using and actually explain your welding technique. Otherwise, excellent job.
Indonesiaan welder often used engine scrap, broken crankcase, melt it with gas torch and cast on iron angle bar 😅. Cheap and worked. 6$ repair. We use this method for change valve angle, valve squish combustion chamber, bypass water jacket and many more
You mean Lumi-Weld sticks??? Been using 'em since about 1968! I used to use 'em with a gasoline BLOWTOARCH! I built a go-cart from aluminum tubing in the 70's with Lumi-Weld sticks. No problems.
I am Ayman from Egypt and I have been working in the field of welding aluminum, cast iron and copper for more than 25 years. I tell you that the metal of the aluminum welding wire, the auxiliary metal, is different from the metal of the part to be welded.
Pocos conocen muchas cosas no todos son médicos o constructores o electricistas o periodistas cada quien sabe un arte y este personaje sabe su trabajo!!!
Ive seen Aluminum welding sticks, but Ive also seen alloy welding rods for gas usage, the ones that can be purchased flow 10X better than what he is using, if you cannot weld you could make a metal plate and drill holes or just fix it with a liquid cement of your choice.
I think this is more about getting a result with what is available. Some places in the world you can't just go to your local welding supplies specialist outlet.
Vous pouvez "coller" tel que vous le faites, certain alliages d'aluminium tel que l'AS5GT, l'AG3 ou l'AG5 ou l'AG7. On peut également réussir sur de l'aluminium bien que ce soit plus problématique car la température de fonte est critique, mais d'autres alliages tel que l'AU4G ne seront absolument incollable avec ce process. Certain autres alliage à majorité zinc seront brasé avec une brasure à l'étain. Votre système fonctionne bien avec des alliages d'aluminium sortant de fonderie. Félicitation pour votre coup de main, c'est du beau travail.
еще в 1982 году мне баба Катя, как ее звал весь завод, приварила ацетиленовой горелкой сломанную подножку с явы. без сжиженного газа! так ее и продал лет 8 назад, подножка не отвалилась.
ну таки да, мне тоже, чуть позже, сосед по гаражу, дядя Коля, заварил место под вырванную шпильку в переднем мосте от Нивы... так и ездили потом лет 10 спокойно, пока не продали... 👍😁
@@ZhukGennadiy Эт всё частности. Можно ж найти плоский кусок от другой ненужной детали, обточить до нужной формы и запаять по периметру проволокой. Всё быстрее.
тут лёгких путей никто не ищет, пайка дорогостоящим кастолином такой дыры - эт для нормальных поцонов, тут никто не экономит на всяком гавне, когда надо снять такую познавательноразвлекательную чепуху
Propan, Butan, Azythelen mit allem kann Alu geschweißt werden, vor allem die Sauerstoffzugabe bringt Hitze, Besser zuvor Oxidation abschleifen, und wie gezeigt mit weicher Flamme erwärmen, oft mit Lot antesten man sieht nichts Glühen, ich hätte ein Stück Alublech eingesetzt, wird alles nicht so heiß, verzuggefaht. Mit Geduld alles wieder gut.😅 Bleib gesund gruß Dieter
The trick is to be able to know when the metal is about to collapse (or melt) I watched a old man 50 years ago repair aluminum parts with a torch kinda like juggleing with one hand
It helps to have the proper welding goggles for aluminum. Aluminum doesn't change color like steel. Instead, the oxide surface layer is harder than the base metal. With the proper goggles, you will see a skin effect as the base metal melts underneath the harder oxide surface layer. This is the precise moment that you apply your filler metal to begin your weld. Having the proper flux will assist the filler to blend with the base metal.
El aluminio es muy buen disipador del calor por eso es tan dificil de soldar. Al menos parece una soldadura solida habria que verlo en uso y que resistencia tiene ese sistema
Метод старый, как автоген, только использован несколько нерационально. Во-первых, гораздо проще было вначале заложить дефект подогнанной латкой, а уж её потом обваривать по краю, так и термические напряжения в изделии выходят меньше, и металл на выходе несравнимо качественнее и равномернее по составу - все-таки кустарная переплавка на коленке, да еще силумина неизвестного состава с заплавкой буквально неизвестно, чем, не сравнится с заводской обработкой. А во-вторых, заваривать дефект чисто технически намного проще и легче было не на воздухе, а на куске, скажем, шамотного кирпича как на подложке.
I see substantial skill here, but I do not see one single word describing what the actual "SECRET" is. It would seem to have something to do with how he avoids the oxide barrier from spoiling the flow and adhesion of the molten puddle and rod tip...but the gas mix, the flame angle, the detection of the melting point...how are these things involved in this still very well kept secret? We will only find out by trial and error, but knowing it is possible is valuable.
what rod is he using? I have tried the aluminum rod with and without flux, it gives the appearance of flowing and sticking but you can get under it with a knife and peal it off. /Also is the key LP gas and not acetylene?
Acetylene is very dirty.....burn it without oxygen and it will give off a dirty black soot......burn propane/butane and its a clean flame. If you ever want a real trip, try acetylene in one of those old calor gas fires :)
He is using what appears to be scrap aluminum. That first rod you see at about 4:20 is not filler. He's using the butt end of a steel welding rod to tap the parent metal around the circumference of the cavity. He's using it to gauge how hot the metal is, and to manipulate the weld puddle.
At about 4:50, it appears that he's adding filler onto the casting. He is not. That is the parent metal of the casting, being worked into a thicker layer, which he then starts adding filler metal onto. It takes a lot of experience.
He it turning/sturing the edge/surface with an arc/mma rod......probably because the flux coating is stopping the heat transfer to his fingers......the filler rod looks like home poured sticks.....basically get a pie e of stainless angle iron, use that as a channel, and pour your choice of molten alloy into it, and the ally will cool in the channel and give you a filler rod when it cools. I used to use aluminium cans melted down.....but with today's Internet, I can buy a 5kg pack of 1 meter 4043 or 5056 for around £30.......so no need......but then, I still do from time to time if I want big sticks, like 5mm up
Согласен, это очень трудоёмкий способ. Надо сделать подкладку с внутренней стороны, зафиксировать её. Залить жидкий алюминий, а затем обварить край показанным способом. И последний этап выровнять на точиле эту заплату. И ещё вариант: если есть листовой алюминий прямо сверху ставить, если этот выступ не помешает дальнейшему монтажу. И ещё можно наложить заплату, и с помощью винтов её зафиксировать, тогда вообще сварка не нужна, зависит от того нужна ли герметичность корпуса или нет.
Iyi kaynakci tabi bu isin incelikleri cok fazla kaynakcilik 21 yy da cok mesafe katetti ,elektronik kaynakcilik cok ilerledi amma bu oksijen kaynakciligi. kaabiliyet meselesi tecrube gerektirir usta da bu gosteride hem tecrube hem kaabiliyet gordum gosterilere devam etmesi ders niteligi de tasir.
It would seem easier to cut a chip to fill the hole, back that up with a chunk of steel to absorb heat and keep it in place, then tack the corners and go from there.
While it is in service it will crack again and require repairs again. There’s is a better way of repairing this and the way you have mentioned is just one method. Like to see how this guy would repair a fuel tank while it is still full of fuel or weld to V8 Engines together .
Hi good morning maybe i was wrong in my input to your welding of aluminum i was looking at the amount of heat that was getting on the metal because its a soft metal but maybe thats the way you have to weld it if in any way i offended you i apologize Samuel Stewart
You can "glue" aluminum alloys such as AS5GT, AG3 or AG5 or AG7 as you do. You can also succeed on aluminum, although this is more problematic because the melting temperature is critical, but other alloys such as AU4G will be absolutely unbendable with this process. Certain other predominantly zinged alloys will be brazed with tin. Your system works well with cast aluminum alloys. Bravo for your expertise, it's a fine job!
Метод стар как Мир. Знаю его со времен СССР. И да, сейчас почти совсем забыт! Лайк!
Еще с конца 40-х годов, таким способом исправляли огрехи литья картеров мотоцикла К-125 на ковровском заводе ЗиД (ИнЗ-2), когда еще не было освоено литье под давлением. Там вся сложность была в подборе состава флюса, под конкретный сплав детали и присадка.
Slava USSR!!! forever friend from Indonesia and Russia
I first learned how to weld aluminum using aluminum welding rod and a special white paste flux. I used oxyacetylene. It is very important to use a slightly carburizing flame, no excess oxygen. Once I purchased a TIG system, never went back. Using gas though, if I were out in the boonies, had nothing else to work with, it was an option. I've also welded pot metal pulleys. Although pot metal is mostly zinc, I was able to mix aluminum with it and got useful results.
Ditto 👍
thanx, good info
There are fluxed aluminum brazing rods sold now that have good reviews. I want to weld up those leaky rivets on my old Jon boat. I not sure how it will work out. So use a carbonizing flame?
@@Accumulator1it won’t work. You’ll never get the oxidation out from behind the river heads or between the seams.
True. I agree.
60 years ago I seen my old man weld pot metal and aluminum he knew a hell of a lot about metal when he welded panels on car's it looked like it was done with a machine people could not believe how good his welding was.
Yea, I've seen the same thing (not my Dad, but someone I knew) If I remember right, he welded together the backpacks they carried on the moon. What an incredible guy and there were some really amazing things I watched him do. I watched him torch weld side panels back together with a large rod it only took him a few seconds. No warping I could see.
The secret is about the skills of the worker, not everybody can do that.. You re very good at your work..
Agree with you 100%!
And few people still know this secret because of the lack of dialogue. It would be immensely useful if you communicated to us what the filler rod is you are using and actually explain your welding technique. Otherwise, excellent job.
При совке сварить алюминий было очень проблемно или невозможно!😊
Indonesiaan welder often used engine scrap, broken crankcase, melt it with gas torch and cast on iron angle bar 😅. Cheap and worked. 6$ repair. We use this method for change valve angle, valve squish combustion chamber, bypass water jacket and many more
You can see video other before about how to get high quality filler rod
@@СергейШевченко-и2ц Идешь на завод к сварщику аргонщику ставишь пузырь и тебе все заварят. Ты этот советский союз видел?, Чтобы такое утверждать.
You mean Lumi-Weld sticks??? Been using 'em since about 1968! I used to use 'em with a gasoline BLOWTOARCH! I built a go-cart from aluminum tubing in the 70's with Lumi-Weld sticks. No problems.
Serviço perfeito.
Lok
I am Ayman from Egypt and I have been working in the field of welding aluminum, cast iron and copper for more than 25 years. I tell you that the metal of the aluminum welding wire, the auxiliary metal, is different from the metal of the part to be welded.
Pocos conocen muchas cosas no todos son médicos o constructores o electricistas o periodistas cada quien sabe un arte y este personaje sabe su trabajo!!!
اعتقد انه بدل كل هذا التعجن لماذا لا تقص قطعة اليمنيوم على الشكل المطلوب ثم تلحمها
Ну, тогда не было бы такого длинного видео.
Todo un costurero de la soldadura 👏🏾👏🏾🙏🏿bendiciones artista
Проще заплатку припаять под размер пробоины заподлицо. И крепче и работы меньше.
Ive seen Aluminum welding sticks, but Ive also seen alloy welding rods for gas usage, the ones that can be purchased flow 10X better than what he is using, if you cannot weld you could make a metal plate and drill holes or just fix it with a liquid cement of your choice.
I think this is more about getting a result with what is available. Some places in the world you can't just go to your local welding supplies specialist outlet.
Kann es sein dass der Elektroden verwendet für Aluminium. Für eine Antwort wäre ich sehr dankbar
Excelente trabalho gostei, meus parabéns 👍
Przepiękne jest to pospawane i zaś pośłuży na sporo lat pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍👍
Todo un costurero de la soldadura bendiciones artista. Excelente trabalho gostei, meus parabéns .
Prima. Große Klasse!!👍👍👍👍 Danke für die vielen Tipps!!!
Vous pouvez "coller" tel que vous le faites, certain alliages d'aluminium tel que l'AS5GT, l'AG3 ou l'AG5 ou l'AG7. On peut également réussir sur de l'aluminium bien que ce soit plus problématique car la température de fonte est critique, mais d'autres alliages tel que l'AU4G ne seront absolument incollable avec ce process. Certain autres alliage à majorité zinc seront brasé avec une brasure à l'étain. Votre système fonctionne bien avec des alliages d'aluminium sortant de fonderie. Félicitation pour votre coup de main, c'est du beau travail.
Каким газом это сваривается?
My dear...please tell me the welding method and temperature because I tried and the part to be welded melted.....thank you very much.
Felicitaciones tecnica y abilidad. Cuan do no hy palabras y lo que haces, dice mucho. Saludos desde Chile
еще в 1982 году мне баба Катя, как ее звал весь завод, приварила ацетиленовой горелкой сломанную подножку с явы. без сжиженного газа! так ее и продал лет 8 назад, подножка не отвалилась.
ну таки да, мне тоже, чуть позже, сосед по гаражу, дядя Коля, заварил место под вырванную шпильку в переднем мосте от Нивы... так и ездили потом лет 10 спокойно, пока не продали... 👍😁
Thank you so much. Good work.
Nicely done Mr. Thank you ❤️
Very cool, ❤love video🇧🇷😉👍 thank you
EXCELLENT. CONGRATULATION!👍👍👍
А не проще было взять кусок по форме отверстия и по кругу пропаять алюминевой проволокой?
Не получится (!) - кусок ушёл на проволоку😀
@@ZhukGennadiy Эт всё частности. Можно ж найти плоский кусок от другой ненужной детали, обточить до нужной формы и запаять по периметру проволокой. Всё быстрее.
Bunun neresi sır bildiğimiz lehim kaynağı yaptın,kalay çubuğu erittin.
тут лёгких путей никто не ищет, пайка дорогостоящим кастолином такой дыры - эт для нормальных поцонов, тут никто не экономит на всяком гавне, когда надо снять такую познавательноразвлекательную чепуху
@@epurhl_kondubeev для кастолина слишком корявый пруток
What rods do you use? Any specific alumaweld? Thanks!
Propan, Butan, Azythelen mit allem kann Alu geschweißt werden, vor allem die Sauerstoffzugabe bringt Hitze, Besser zuvor Oxidation abschleifen, und wie gezeigt mit weicher Flamme erwärmen, oft mit Lot antesten man sieht nichts Glühen, ich hätte ein Stück Alublech eingesetzt, wird alles nicht so heiß, verzuggefaht.
Mit Geduld alles wieder gut.😅
Bleib gesund gruß Dieter
Гитлер Капут.
Hätte ich auch so gemacht! Vor allem halte ich ihren Vorschlag für die stabilere Methode!
Mantap bos 👍👍
Luar biasa hasilnya bagus
Lobang segitu lebar jadi rapat❤
Terimakasih atas pencerahannya bos, SEMOGA BERMANFAAT DAN SUKSES SELALU..., MAMPIR JUGA YA BOS...
The trick is to be able to know when the metal is about to collapse (or melt)
I watched a old man 50 years ago repair aluminum parts with a torch kinda like juggleing with one hand
It helps to have the proper welding goggles for aluminum. Aluminum doesn't change color like steel. Instead, the oxide surface layer is harder than the base metal. With the proper goggles, you will see a skin effect as the base metal melts underneath the harder oxide surface layer. This is the precise moment that you apply your filler metal to begin your weld. Having the proper flux will assist the filler to blend with the base metal.
Hola qué tipo de Barillas cogiste para soldar el cárter
Un cordial saludo Pascal
Guna gas untuk masak ke bro??
If this is real time true footage the one with the torch is an artist.
Que tipo de electrodo usaste al principio? Saludos
Cualquiera, solo lo usa para darle forma creo..
Nicely done. I wanted to see it grinded to a smooth finish.
Very nice workmanship. 👍
El aluminio es muy buen disipador del calor por eso es tan dificil de soldar. Al menos parece una soldadura solida habria que verlo en uso y que resistencia tiene ese sistema
Like in this case, repair of a cover, top in my opinion. But I bet, that is not as simple as it looks. I would use alu soldering sticks.
Если ты не когда не делал нечего умнечать мы варили блоки машин ещё 75году нужно только желание и умение газосварщика а не бло хера
Excellent work
Which welder rod u use
🤔Oh cool ça c'est dû três bon boulot bravo 👍
Itu jenis kawat las almunium apa ko tebal bnget
Метод старый, как автоген, только использован несколько нерационально. Во-первых, гораздо проще было вначале заложить дефект подогнанной латкой, а уж её потом обваривать по краю, так и термические напряжения в изделии выходят меньше, и металл на выходе несравнимо качественнее и равномернее по составу - все-таки кустарная переплавка на коленке, да еще силумина неизвестного состава с заплавкой буквально неизвестно, чем, не сравнится с заводской обработкой. А во-вторых, заваривать дефект чисто технически намного проще и легче было не на воздухе, а на куске, скажем, шамотного кирпича как на подложке.
I see substantial skill here, but I do not see one single word describing what the actual "SECRET" is. It would seem to have something to do with how he avoids the oxide barrier from spoiling the flow and adhesion of the molten puddle and rod tip...but the gas mix, the flame angle, the detection of the melting point...how are these things involved in this still very well kept secret? We will only find out by trial and error, but knowing it is possible is valuable.
Good works! 👌😊
what rod is he using? I have tried the aluminum rod with and without flux, it gives the appearance of flowing and sticking but you can get under it with a knife and peal it off. /Also is the key LP gas and not acetylene?
Acetylene is very dirty.....burn it without oxygen and it will give off a dirty black soot......burn propane/butane and its a clean flame.
If you ever want a real trip, try acetylene in one of those old calor gas fires :)
He is using what appears to be scrap aluminum. That first rod you see at about 4:20 is not filler. He's using the butt end of a steel welding rod to tap the parent metal around the circumference of the cavity. He's using it to gauge how hot the metal is, and to manipulate the weld puddle.
At about 4:50, it appears that he's adding filler onto the casting. He is not. That is the parent metal of the casting, being worked into a thicker layer, which he then starts adding filler metal onto. It takes a lot of experience.
At about 5:40, he switches to filler, and starts working it into the bead of parent metal.
What kind of electrod is it
Excelente trabajo campeón una pulida y listo...
Nice work. What are the two kinds of rods you are using? Will be a good information.
He it turning/sturing the edge/surface with an arc/mma rod......probably because the flux coating is stopping the heat transfer to his fingers......the filler rod looks like home poured sticks.....basically get a pie e of stainless angle iron, use that as a channel, and pour your choice of molten alloy into it, and the ally will cool in the channel and give you a filler rod when it cools. I used to use aluminium cans melted down.....but with today's Internet, I can buy a 5kg pack of 1 meter 4043 or 5056 for around £30.......so no need......but then, I still do from time to time if I want big sticks, like 5mm up
Надо было подставить снизу железную подкладку и расплавить так быстрей получится
Подскажите пожалуйста , а что за газ ?
Согласен, это очень трудоёмкий способ. Надо сделать подкладку с внутренней стороны, зафиксировать её. Залить жидкий алюминий, а затем обварить край показанным способом. И последний этап выровнять на точиле эту заплату. И ещё вариант: если есть листовой алюминий прямо сверху ставить, если этот выступ не помешает дальнейшему монтажу. И ещё можно наложить заплату, и с помощью винтов её зафиксировать, тогда вообще сварка не нужна, зависит от того нужна ли герметичность корпуса или нет.
видно, что там масло плескалось
@@АлексейМанаков-й5в пропан и кислород скорее всего
@@АлексейМанаков-й5в Судя по цвету пламени, скорее всего, ацетилен и кислород.
Какой же это секрет.У меня в бригаде пару молодых ребят на отлично с такой работой справляются .
У меня в бригаде тоже есть пара секретных ребят! 😅
Which impact wrench do you use?
That looks like the harbor freight special. Lol.
For real though I think the brand is called Hercules or something.
Iyi kaynakci tabi bu isin incelikleri cok fazla kaynakcilik 21 yy da cok mesafe katetti ,elektronik kaynakcilik cok ilerledi amma bu oksijen kaynakciligi. kaabiliyet meselesi tecrube gerektirir usta da bu gosteride hem tecrube hem kaabiliyet gordum gosterilere devam etmesi ders niteligi de tasir.
Ну ты, может, и не знал, а у нас этот припой в каждом магазине продается. И это не сварка, а пайка.
Mas jelasin ke mereka jenis gas LPG itu apa.
Hi, where can i buy this lot? I bought in china but it fallen down like shit.
Bloody good repair!
Para ahorrar soldadura y que no sufra tanto calor la pieza se hace un molde del mismo material,ya soldaria no mas los bordes.
Pretty cool 😎 any warpage?
Прикольно, но качество такого ремонта сомнительно.
Franchement respect j'ai déjà essayé et le résultat c'est dur
Daerah mana ya kalau dekat mau ngelasin
.nggk pkai pijar ya mas
Very good! Yea, I can do that. Thank You. 🤞🤞
ONE WORD .... !!!!!!! JB WELD .... !!!!!! WORKS ....!!!!!! DOUBLE G HERE ...!!!!!! "GARY "
Isto é inevitável fico tope dimais
Eres un chingon en la soldadura.
Y el fundente q .o q tipo de varilla de alunimio es
It would seem easier to cut a chip to fill the hole, back that up with a chunk of steel to absorb heat and keep it in place, then tack the corners and go from there.
Parabéns! Excelente trabalho!
Muy interesante!!! gracias por compartir
I would have used i piece of alu . And welded in the hole min of work ,but nice job.
Grande artista davvero!!!
Prova poi con un pezzettino di pentola di alluminio; resterai esterrefatto!!!!
لو وضعنا قطعة ألومنيوم في مكان الكسر وقمنا بلحامها فالعملية ستكون أسهل بكثير
itu pake borax gak bang?
Добиться герметичности от подобной латки практически невозможно . Обязательно будет "сифонить" независимо от толщины латки .
Não seria melhor ter cortado um tampão e ter unido Ad duas partes?
While it is in service it will crack again and require repairs again. There’s is a better way of repairing this and the way you have mentioned is just one method.
Like to see how this guy would repair a fuel tank while it is still full of fuel or weld to V8 Engines together .
блин пр...... , не проще было отрезать походящий кусок алюминия и обварить его
Nice job..
Try this and you will quickly discover there's far more skill to doing this than meets the eye.
Потрясающе!
Before you comment with wise remarks only those that can aluminium weld know it’s not easy at all . Well done that man RESPECTS
I was thinking that you would of traced the damage to a plate of aluminum and cut and then welded it in place
Hi good morning maybe i was wrong in my input to your welding of aluminum i was looking at the amount of heat that was getting on the metal because its a soft metal but maybe thats the way you have to weld it if in any way i offended you i apologize Samuel Stewart
Looks fantastic
Nice job
ну, начнем с того, что это НЕ сварка а ПАЙКА.
и закончим тем, что ничего нового.
ps. Castolin 192 вполне себе годится.
Лутше врезать заплатку и ее уже припаять кдетали выйде быстрее и красивие и належнее.
在台灣補這個用電焊機只要鋁片一樣大小然後黏一下可以了不用這麼麻煩
Hola, excelente trabajo. Usas gas lp porque el acetileno da exceso de calor?
price difference
Exelente campeón
Beau travail👍, mais je préfère le TIG car plus facile de souder un patche en tole alu.
kawat las bahan aluminium apa?
Интересно.
А я б там лейбу прикрутил, на прокладку, и было б смотровое окно(ревизия).))
Jaka dysza jaka moc?
Falta la traducción e instrucción,algo básico..buen trabajo.
An interesting variant of aluminum welding, I really want to learn how to cook samama
Very good
Pakan pakai kawat las ap bang
What’s the type of gas are you using is it propane or acetylene ?
The description says LPG so Liquide Propane Gas
@@aussietruckphotosandmodels8510 thanks , I missed that
Just wondering if you make those aluminum rods your using?...
He has a video making the rods.
Não seria mais fácil fazer um remendo ?? Colocar uma chapa de alumínio no lugar do buraco e soldar as bordas ??🤷♂