Clearing some space around the shed so these three pieces were good to get done. Unfortunately not as much Copper as I'd hoped but it is what it is. A few problems with the kiln so just some open cast Halloween moulds in zinc as well instead . Possibly be a shorter video next week as the week after I'm hoping to do that 690 kg motor and that's gonna take me awhile. Anyway sit back relax and enjoy the video. Thanks for sticking around as long as you have. I really appreciate it and I hope you have a happy safe weekend.👋🏻😁.
It's bizar to realize that evrything exept the oceans was once melted, what a mindfuck. Allways good to see you at it again Dion, I send my love to you and Mrs. Bigstack and the dogs.
Nice one Knackers! Those two skull coins with the mystery metal looked great! Until you destroyed one of them LOL Just in case people are wondering, my ute does sound like that! No sound effects needed! Have a good one mate, talk soon.
Yes mate all good and no added sounds used. It’s like a little jet that bad boy! Thanks again mate. Much appreciated. Can Crusher is doing well Hopefully it’s generating some people your way and I appreciate the build mate. Quite a lot of comments coming in about it way more than I can read but from what I can see it’s all 99% good 👊🏻. . just trying to clean up the shed and melt area as I’ve got that bigger arse Motor coming up. I’m thinking it’ll come out in two weeks as I’ll do a quick video this week and have a few extra days for the big melt. No doubt that’s gonna be 90 minutes long that video but we will see👊🏻😁.
@ subs are still trickling in which is awesome! I am still trying to get out in the garage and do something productive. I have 3 more traveling videos to edit, plus one for the 600km ride tomorrow.
Hello! How are you! We're melting everything! Good cylinders,you can cut off the top and the partitions in the middle,and then weld them on the sides,it will be a wheelbarrow👍
I empathized with you concerning the copper-clad aluminum motor windings, but you still managed to pull a good yield all the same. And of course, the Frenchies were their usual delightful selves, give 'em both a belly rub for me, LOL. See you next Friday, greetings from Orlando, FL!
I can't believe how dirty the oil was in that first compressor! I've seen cleaner oil come outa compressors over 50 years old and been worked hard their whole life!
Manganese brother I too was interested in what they are made of so i did some chemical testing, and manganese is present along with aluminum. The scrapyard still call them brass alloy. as its such a horrible reaction I send all silver plug ends to scrapyard . I too have had a week of chest infection passed on by the school. Cheers for that son. Awesome episode hope you had an amazing hallows eve brother kind regards stay safe
In Queensland, we don't have daylight saving. We hate it. I had trouble with my kids getting them into bed at night n getting them up in the morning. Plus, a whole heap of other reasons too. We voted to have it scrapped. Thank goodness.
@cathybenson5119 I vote to have English parliament dissolved by the king. Forced Elections can only happen if the king steps in. It's awful here in England. And agreed we hate clocks business as well. we all wish farmers would get a grip.
A flame grilled whopper from Burger King has to be my favourite fast food. Which is what Hungry Jack's is called, here. I don't know bandsaws ran on milk(!) A shame there wasn't more copper to be had out of that lot. I suppose aluminium's alright. I'm not sure what that, 'brass', was. It certainly looked like it when it was molten with the usual white smoke and yellow residue you get from vaporising zinc, but it was far too brittle when cast to be the real deal. Sorry to hear you've not been well. I hope you're feeling better soon.
If I remember right, your Hungry Jacks is what the US Burger King has to call their restaurants down there, as the name Burger King conflicts with a restaurant already there. I'm more partial to Wendy's or Chik Fil A myself. As usual, I enjoyed the video and thank you for posting! As to the metal, could it possibly be some kind of cast iron? I heard it could be an off white color and very brittle.
My fav fast food? Long John Silvers. Sorry you were sick. I often wonder ; do you simply edit out the bits where you are speaking or grunting or whatever, or are you just _that_ quiet?
So listen. I know your channel is mostly melting (and monkey's) but have you ever thought of adding at least one super compressed aluminum foil bar to the stack? I know if you squish that stuff hard enough it becomes solid. I would like to see you do something like that.
No chance that silver metal might be some kind of zinc? The way it reacted in the crucible makes me think so becasue that looked like zinc oxide flames.
I do excavating, construction, and demolition for a living. I get lots of scrap per year that I'm seriously considering a metal foundry. I've watched your channel for years and I'm about to make the leap. I just hauled off $1200 in scrap tin/iron in my dump truck last week. I get 200-300lb of copper per year, lots of aluminum, and 50+/- lb of brass per year all free from remodeling and demolition during the colder months. I have to ask myself, why not melt the non-ferrous metals down into beautiful ingots?
Yeah mate, they are always gonna be here. It just depends on how much I have. I don’t really get that much each month so it’s normally a few months apart, but they will definitely be an ongoing thing. It’s just a matter of how much mail I have to open 👍🏻.
Yesterday was dowali which is a hindu 🕉 festival of firecrackers it is celebrated ro bring purity and prosperity ro our houses rhrough goddess laxmi Happy diwali to all
Getting stuck in and making money and being able to afford new tools to get more productive, nice. That silver metal looked like tin, the yellow puffs of smoke? If you were feeling adventurous it might pay to invest in an xrf gun, you never know what exotics you might stumble upon!
For your information he doesn't melt scrap for " bucks" he does have a paid job, he makes these videos for entertainment purposes, think hard next time before you post a idiotic comment.
Clearing some space around the shed so these three pieces were good to get done. Unfortunately not as much Copper as I'd hoped but it is what it is. A few problems with the kiln so just some open cast Halloween moulds in zinc as well instead .
Possibly be a shorter video next week as the week after I'm hoping to do that 690 kg motor and that's gonna take me awhile. Anyway sit back relax and enjoy the video. Thanks for sticking around as long as you have. I really appreciate it and I hope you have a happy safe weekend.👋🏻😁.
Hope you get well soon ❤ thanks for the extra efford. Take care!
do you live in or near the ferguson valley?
Ho guardato tutto il video. Un saluto dall'italia 👍
a shorter video would not be disliked BigD. I have a hard time watching the really long ones as it is!
The birds r so beautiful they need their own channel!!!
I can only imagine the pure bliss of disassembling something and not having to give a single crap about how to put it back together
That’s what I always do with stuff that doesn’t work anymore. Before I bin it, I dismantle it to see how it works 😄 It is bliss indeed 😉
Good to see your magpie friends haven’t been chased of by the bully crows.
Anyone else want this man more than fresh air or clean water?
Hahahahaha it's so funny to see a woman post a dude comment. Not hating on it lol
Really glad to see the Magpies are back and eating from your hand again. I missed those little buggers. :)
Wooo it is Friday
I so look forward to Fridays fantastic video 📹 thank you so much for your time ⏲️ 😊
Good Morning Mr D From Wakefield, Massachusetts. I hope you feel better the Australian heat will burn that 🔥 out of yaa Mate
@@SalSalvucci-of7cs yes that’s definitely true and I must admit the Mexican beer is certainly helping as well🍻🍻🍻👊🏻😁.
Watch out for that, Carona Flu
I Love those night melts
Hope you're feeling better and thanks for bringing us along 👍
7'' band saw !!!!!!!!!!!!!!!!!!! I love new man toys !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
It's bizar to realize that evrything exept the oceans was once melted, what a mindfuck. Allways good to see you at it again Dion, I send my love to you and Mrs. Bigstack and the dogs.
Big Street D! Back with another Outback special!❤️🇨🇦
Nice one Knackers! Those two skull coins with the mystery metal looked great! Until you destroyed one of them LOL
Just in case people are wondering, my ute does sound like that! No sound effects needed!
Have a good one mate, talk soon.
Yes mate all good and no added sounds used. It’s like a little jet that bad boy! Thanks again mate. Much appreciated. Can Crusher is doing well Hopefully it’s generating some people your way and I appreciate the build mate. Quite a lot of comments coming in about it way more than I can read but from what I can see it’s all 99% good 👊🏻.
. just trying to clean up the shed and melt area as I’ve got that bigger arse Motor coming up. I’m thinking it’ll come out in two weeks as I’ll do a quick video this week and have a few extra days for the big melt. No doubt that’s gonna be 90 minutes long that video but we will see👊🏻😁.
@ subs are still trickling in which is awesome! I am still trying to get out in the garage and do something productive. I have 3 more traveling videos to edit, plus one for the 600km ride tomorrow.
I have the same experience lately with electric motors and transformers. Freaking AL! I love CU😮🤙🌴
oh Boy !!!
😍😍
I love the ending music.. To relaxing
Hello!
How are you!
We're melting everything!
Good cylinders,you can cut off
the top and the partitions in the
middle,and then weld them on the sides,it will be a wheelbarrow👍
I empathized with you concerning the copper-clad aluminum motor windings, but you still managed to pull a good yield all the same. And of course, the Frenchies were their usual delightful selves, give 'em both a belly rub for me, LOL. See you next Friday, greetings from Orlando, FL!
30 seconds in and im fully entertained. Laughing so hard at the evil compressor.
@@allnighterowl5347 Hey mate I don’t make the rules. Apparently it had to be destroyed. I didn’t have a choice🤷🏻♂️
Не знаю почему но мне по приколу залипнуть на твоих видео. Привет из Калининграда.
Dang I’m late again, Happy Friday 😎
Those magpies are cute. They keep coming back for a snack 😂
My favorite fast food is Del Taco. It's a west coast chain that is thankfully expanding east. I was happy when one opened up close to me in Virginia.
Best day of the week Friday melts
Love you big stacked❤
And I love you too
I can't believe how dirty the oil was in that first compressor! I've seen cleaner oil come outa compressors over 50 years old and been worked hard their whole life!
Make a melting furnace using this wind pump tank and publish the video!
Cuts like a hot knife through butter!
Manganese brother I too was interested in what they are made of so i did some chemical testing, and manganese is present along with aluminum. The scrapyard still call them brass alloy. as its such a horrible reaction I send all silver plug ends to scrapyard . I too have had a week of chest infection passed on by the school. Cheers for that son. Awesome episode hope you had an amazing hallows eve brother kind regards stay safe
awesome. nice vid
Good morning from California's beautiful wine country! 😁😁😁
Bourbon neat mate, from Pacific Standard Time. Cheers. Apprecciate YOU. Like 👍
48:16 OMG u have the stones 5th element is my number one movie of all time and I guess u do that the 5th element and its” love “ in my Leeloo voice 😂
The white substance in the brass is probably white brass because they’re three colors of brass, red, white and yellow
Man I am your big fan 😊
It’s the great time of the week, melt time😊
600 kg. and 2 months to go ! 💪😎👍 Lets go Big Stacked 🎃📕🦄
😆😂🤣 never seen anyone cut open a shipping crate with a chinsaw before!😂😂😂
I knew that evil blue one was up to something. He was looking at you sideways.
Do some underground metals melt and the mini shed and ps2 melt pls
Pls like
Yay. Kick the boots off, its BigstackD time
Clocks gone back in England I get you an hour early😮
In Queensland, we don't have daylight saving. We hate it. I had trouble with my kids getting them into bed at night n getting them up in the morning. Plus, a whole heap of other reasons too. We voted to have it scrapped. Thank goodness.
@cathybenson5119 I vote to have English parliament dissolved by the king. Forced Elections can only happen if the king steps in. It's awful here in England. And agreed we hate clocks business as well. we all wish farmers would get a grip.
Hope you’re feeling better. Give the boys a scratch from me.
A flame grilled whopper from Burger King has to be my favourite fast food. Which is what Hungry Jack's is called, here.
I don't know bandsaws ran on milk(!)
A shame there wasn't more copper to be had out of that lot. I suppose aluminium's alright. I'm not sure what that, 'brass', was. It certainly looked like it when it was molten with the usual white smoke and yellow residue you get from vaporising zinc, but it was far too brittle when cast to be the real deal.
Sorry to hear you've not been well. I hope you're feeling better soon.
You should start saving the wee pistons and cast a block with 80 cylinders.
Big StackD engine
YEAH FRIDAY BOIIIIIIIIIs
😊😊😊😊 dzień dobry panie twórco 😎
If I remember right, your Hungry Jacks is what the US Burger King has to call their restaurants down there, as the name Burger King conflicts with a restaurant already there. I'm more partial to Wendy's or Chik Fil A myself. As usual, I enjoyed the video and thank you for posting!
As to the metal, could it possibly be some kind of cast iron? I heard it could be an off white color and very brittle.
May it's just the old mechanic in me . But out of three broken units i would have tried to make one working one
On the bright side... None of those compressors had flat head screws 🎉
My fav fast food? Long John Silvers. Sorry you were sick. I often wonder ; do you simply edit out the bits where you are speaking or grunting or whatever, or are you just _that_ quiet?
Lots of editing mate ! A hell of a lot of editing 👍🏻
It's melt time
My favourite fast food is a McDonald's banna thickshake and fries and i dip them in .
Flying ants, means a drop in air pressure.
That strange metal looks like some tin alloy
I think that particular brass is called Chinese brass.
So listen. I know your channel is mostly melting (and monkey's) but have you ever thought of adding at least one super compressed aluminum foil bar to the stack? I know if you squish that stuff hard enough it becomes solid. I would like to see you do something like that.
❤❤❤❤
Flying ants are actually flying termites
❤❤❤❤❤❤❤❤❤
No chance that silver metal might be some kind of zinc? The way it reacted in the crucible makes me think so becasue that looked like zinc oxide flames.
My favorite fast food is the same but it's called Kentucky Fried Chicken here in St Louis Mo. USA. Same Company Differnt Name.
49:56 - did you know that invertebrates do not have skeletons ? xd
The calcium in milk helps the bandsaw have strong teeth?
Yep. Should be silver. Either that, or that was zinc.
Would it help your open molds if you added a screw hole or something to their back sides so you can more easily remove them?
ta bud that ol song when u show book prices weighups currencies is that marlene dietrich ? and vape coils i believe maybe be brass thanks buddy
The unknown silver metal wouldn't be tin or antimony by any chance as both of them have a silver sheen too them, especially antimony?
Could the wierd silvery metal, by chance, be monel, or possibly zamak?
it's been a while since you made a really heavy bar, any plans to make a 10kg+ bar?
What do you do with it once you reach your target weight?
I do excavating, construction, and demolition for a living. I get lots of scrap per year that I'm seriously considering a metal foundry. I've watched your channel for years and I'm about to make the leap. I just hauled off $1200 in scrap tin/iron in my dump truck last week. I get 200-300lb of copper per year, lots of aluminum, and 50+/- lb of brass per year all free from remodeling and demolition during the colder months. I have to ask myself, why not melt the non-ferrous metals down into beautiful ingots?
You should definitely give it a go mate! You’ll never regret it.
Kinda miss fan mail segments. They coming back? Maybe 1x at end of a month?
Yeah mate, they are always gonna be here. It just depends on how much I have. I don’t really get that much each month so it’s normally a few months apart, but they will definitely be an ongoing thing. It’s just a matter of how much mail I have to open 👍🏻.
Do a silver melt with all of the contacts?
China,s air comperssor is cheap , all is chesp , made in China is cheap
Why do some motors have pure copper and other motors have copper covered aluminium?
Is it too late for a Happy Halloween?
Yesterday was dowali which is a hindu 🕉 festival of firecrackers it is celebrated ro bring purity and prosperity ro our houses rhrough goddess laxmi
Happy diwali to all
brasil
Third!
Getting stuck in and making money and being able to afford new tools to get more productive, nice.
That silver metal looked like tin, the yellow puffs of smoke?
If you were feeling adventurous it might pay to invest in an xrf gun, you never know what exotics you might stumble upon!
Subscribe every one.
Why don't you create a discord channel?
Why not make a tiki out of metal
You need a truck!
How cheap things are made nowadays...it's almost laughable. It is a wonder they work at all.
Get out and vote America 🇺🇸
HARD way to make 20 bucks! Do you have a cost factor- crucibles, gas? m
For your information he doesn't melt scrap for " bucks" he does have a paid job, he makes these videos for entertainment purposes, think hard next time before you post a idiotic comment.
Uhh, i am proud, to be under the first 20 commenters. 👏🥹
Now let‘s see, what bigD does today. 👍😃