I have the schittybilt 6.05 cfm. Been using it for years. Gauge was junk, fittings were off standard, so I just cut the line and put 1/4 npt fittings with 25' of much better quality air hose. Looks like this one already has a better hose than the cheapo curly schitt everyone else includes. Great job, bro. Jeepers on a budget need to know budget friendly accessories! 👍🏻👊🏻
@@JLLIFEOFFROAD So...let's say for example, you wanted to plug a "standard" size hose into the compressor....won't work. The Schittybilt quick discos are NOT 1/4" npt. So....I fixed it.😁😎
I pain a 100$ for max Trax at napa. It's quicker than arb. And portable. For both my jeeps. Had it for a year. And had to air up 8 37s. Yes 8. The hose got hot. But it did it. . I think your reviews are great. Unfortunately I recently broke on the trail. My stearsmarts drag link joint literally snapped 😳. I was just going down hill. . That video should be coming out soon. . I like the reviews on your rpm steering kit. It's on order. So I hope I get it soon. 🙏
Thts not good to hear… hopefully no major damage/ injuries???? I know steer smarts studs are… straight compared to being tapered… was it perhaps over tightened???
@@JLLIFEOFFROAD no. It was torqued to spec. Everyone was ok. . Just a late night getting home. And some jeep pride hurt lol. I was running with a Bronco and Toyota. So I was teased . It was in good fun. I was the only gladiator. . . I'm looking at rockjocks new stuff too. Might be changing my order to that. . I like how the joints are easily replaceable
@@JLLIFEOFFROAD . I agree. Have you looked at the rockjock new extreme module drag link. Holy cow. The ends just screw off. And the tie rod is the same. They are built for dana 60 axles. But youbjust screw in the ones for dana 44. And if you go up in size you put the 60 in. But 89 for spare joints and fixable on the trail
I would most definitely spend another minute or two per tire and save $500 for this one I don't have those utube connections or utube dollars to get an arb compressor
Backup compressor is a must. Great content. 🤟😎
🙌🙌🙌🙌 love your unwavering support!
I have the schittybilt 6.05 cfm. Been using it for years. Gauge was junk, fittings were off standard, so I just cut the line and put 1/4 npt fittings with 25' of much better quality air hose. Looks like this one already has a better hose than the cheapo curly schitt everyone else includes. Great job, bro. Jeepers on a budget need to know budget friendly accessories! 👍🏻👊🏻
Off standard??? Wtf is tht??!
@@JLLIFEOFFROAD So...let's say for example, you wanted to plug a "standard" size hose into the compressor....won't work. The Schittybilt quick discos are NOT 1/4" npt. So....I fixed it.😁😎
What a boomer thing to say 😂
3/8 hose by 1/4 hose… talk like a man next time 😂 I’m sorry… Thts rude…I’m drunk. 😂
@@JLLIFEOFFROAD REALLY??🙄🙄
Some good info broski, I’ve been running a slime brand air pump that’s done alright. This might be worth the coin though.
Never hurts to have a back up 🙌🙌🙌
I pain a 100$ for max Trax at napa. It's quicker than arb. And portable. For both my jeeps. Had it for a year. And had to air up 8 37s. Yes 8. The hose got hot. But it did it. . I think your reviews are great. Unfortunately I recently broke on the trail. My stearsmarts drag link joint literally snapped 😳. I was just going down hill. . That video should be coming out soon. . I like the reviews on your rpm steering kit. It's on order. So I hope I get it soon. 🙏
Thts not good to hear… hopefully no major damage/ injuries???? I know steer smarts studs are… straight compared to being tapered… was it perhaps over tightened???
@@JLLIFEOFFROAD no. It was torqued to spec. Everyone was ok. . Just a late night getting home. And some jeep pride hurt lol. I was running with a Bronco and Toyota. So I was teased . It was in good fun. I was the only gladiator. . . I'm looking at rockjocks new stuff too. Might be changing my order to that. . I like how the joints are easily replaceable
Ease of maintenance is a huge decider for me
@@JLLIFEOFFROAD . I agree. Have you looked at the rockjock new extreme module drag link. Holy cow. The ends just screw off. And the tie rod is the same. They are built for dana 60 axles. But youbjust screw in the ones for dana 44. And if you go up in size you put the 60 in. But 89 for spare joints and fixable on the trail
This reminds me of the MV-50 or MF-1050 compressor (sold under a few names). These originally sold for around $50, but yeah, inflation...
Yea… seeing how stupid expensive things have gotten over the last 2 years makes me wanna get violent
Hey man … have not gotten to watch your vlogs in a good while !!! I hope all is well …
Dude I like my smitybuilt compressor that's super similar to that one, but never tested it's speed.
The bigger you go in tires… the more speed becomes a bigger deal 😂
i have a Viair system 10005 in my blazer ,got tired of dealing with the little compressors failing.
Nice… viair is good shit…
I would most definitely spend another minute or two per tire and save $500 for this one
I don't have those utube connections or utube dollars to get an arb compressor
Lol, paid retail for the arb…. Those ding dongs at the dealership weren’t getting it 😂
Gonna put the twin in heathen and the single in the truck
And gave this compressor to a friend in need of one…
My viair does 15 to 30 lbs in 3 minutes or less. I think it’s a 400.
That’s good… quick and reliable 😂🙌
The gauge on my viair was never right
Yea.. my arb gauge is the same. Drives me nuts 😂
Truth
Sup MoDale
Hey buddy!!!
Hey man … have not gotten to watch your vlogs in a good while !!! I hope all is well …
You need to watch the last video bro! It’s good hearing from you thou! Been a minute since u dropped in