These are related glitches. The paper jam is the result of a damaged Fuser, so if you fix the fuser there will be no sc codes and no paper jams. Remove the fuser and check the rollers for wear. Replace shafts if necessary and obligatory thermistors.
@@MrRicoh everythings are ok in the fuser but the only thing I doubt the fuser sensor. If they're not working , could that be the reason for jamming paper before the Fuser ie not going inside the fuser?
There is no sensor that is responsible for jams in front of the radiator. Replace grease roller, pressure roller, separators and bearings - always do this after 120,000 copies. Of course, every 60,000 you replace the paper pick-up roller and the separator in the paper cassette, because that's the basis.
Buenas tardes, tengo un problema con mi banda de transferencia voy a tener que cambiarla en unos meses, pero me dicen que lo ideal es cambiar todo, con todo y la base, pero busco en internet y solo me venden la banda de transferencia, sin su base. Que es lo más recomendable ? Cambiar toda la pieza? O hacerlo como lo muestra en su video? Mi máquina es una Savin mpc 4502 Espero pueda responder a mi comentario Excelente video muy útil 😉 like, like 👍🏻 👍🏻
Hi, that's a good question. You can easily replace the tarnsfer belt and trasfer cleaning blade as shown in my video. Of course, you can replace the entire transfer unit because it is faster and easier, but much more expensive.
Do you ask about our arrival? Is here: copy-expert.com/pl/p/Przyrzad-haczyk-do-zakladaniazdejmowania-sprezynek-i-zapetlania-drutu-elektrod/779 Regards and good luck. 🔥🔥 UA-cam SUPPORT: ua-cam.com/channels/OHtXTtGHj33pUm8Gf2FH3A.htmljoin 😁😆 PATREON: www.patreon.com/CopyExpertMovieStudio 🔥💥 PATRONITE: www.patronite.pl/1796
Excelente, gracias
Thank You 🤩🤩🤩
Merci beaucoup et bonne chance
👍👍👍👍👍
Thank You!
Bravissimo .Grazie molto chiaro grazie ciao .
Grazie e spero di esserti stato d'aiuto.
Thanks
Greetings from Poland. I hope you will find my videos useful.
Thank You. Look this: ServiceTraining about copiers and printers Lesson 1-10 (level 1) UA-cam: ua-cam.com/play/PLQGXf8WTvixODLzK3dJ6f_wiNp734mU_0.html
I like it 👍👍❤️
Thank You :)
Thank You
Thank you and best regards
Good job!
Podziękował serdecznie 🤩🍺🍺🍺🍺😄😄
what to do if the paper is jamming before the heater (fuser unit) in MP3351 and showing error 541'551?
even not resolved by sc code settings.
These are related glitches. The paper jam is the result of a damaged Fuser, so if you fix the fuser there will be no sc codes and no paper jams. Remove the fuser and check the rollers for wear. Replace shafts if necessary and obligatory thermistors.
@@MrRicoh
everythings are ok in the fuser but the only thing I doubt the fuser sensor. If they're not working , could that be the reason for jamming paper before the Fuser ie not going inside the fuser?
There is no sensor that is responsible for jams in front of the radiator. Replace grease roller, pressure roller, separators and bearings - always do this after 120,000 copies. Of course, every 60,000 you replace the paper pick-up roller and the separator in the paper cassette, because that's the basis.
@@MrRicoh
sorry that was thermostat which has been replaced and ok now
thanks
Buenas tardes, tengo un problema con mi banda de transferencia voy a tener que cambiarla en unos meses, pero me dicen que lo ideal es cambiar todo, con todo y la base, pero busco en internet y solo me venden la banda de transferencia, sin su base. Que es lo más recomendable ? Cambiar toda la pieza? O hacerlo como lo muestra en su video? Mi máquina es una Savin mpc 4502
Espero pueda responder a mi comentario
Excelente video muy útil 😉 like, like 👍🏻 👍🏻
Hi, that's a good question. You can easily replace the tarnsfer belt and trasfer cleaning blade as shown in my video. Of course, you can replace the entire transfer unit because it is faster and easier, but much more expensive.
@@MrRicoh muchas gracias por responder a mi comentario, muy amable 🙂
Saludos. Espero que haya resuelto su problema y que la copiadora funcione correctamente.
WHAT THE NAME OF PART FIRST AND LAST TO OPEN CLEANING UNIT?
Do you ask about our arrival? Is here: copy-expert.com/pl/p/Przyrzad-haczyk-do-zakladaniazdejmowania-sprezynek-i-zapetlania-drutu-elektrod/779
Regards and good luck.
🔥🔥 UA-cam SUPPORT: ua-cam.com/channels/OHtXTtGHj33pUm8Gf2FH3A.htmljoin
😁😆 PATREON: www.patreon.com/CopyExpertMovieStudio
🔥💥 PATRONITE: www.patronite.pl/1796