New Acrylic Quad XL2 Fuse Blocks and SMD Ceramic ANL Fuses | Great for Car Audio!
Вставка
- Опубліковано 7 лют 2019
- SMD Products can be found at www.wcCarAudio.com , Amazon, Ebay and more!
visit: www.stevemeadedesigns.com/board - Join our fun, friendly and knowledgeable community today!
#CarAudio #FuseHolders #CeramicFuse #Speakers #SMD #CarAudio #unboxing
Some new stuff we are working on at SMD HQ! We have fuse blocks from 1, 2, 4, 8, 10 and 16 slots available. The new XL2 series is available in quad (4) right now but the rest will follow. The new Ceramic SMD ANL fuses are awesome! You simply cannot compare these to those cheap brands with plastic housings that almost everyone uses. Even most ceramic fuses out there can't compare as far as the quality is concerned. They come in 2-packs so order up when you are ready! We are!
#CarAudio #SMD #Speakers #spl #wiring
Support these videos here! / meade916
Also, check out my other pages:
Instagram: / meade916
Facebook Page here:
/ smd-steve-meade-design...
Follow: / meade916
Visit Sonic Electronix at www.sonicelectronix.com - Авто та транспорт
Sorry for the short video. I just wanted to show you guys what i been up to! I showed this stuff LIVE on my Instagram channel earlier. Don't miss the next live feed! Follow me at instagram.com/meade916
Your can purchase these now here.....
SMD Store - www.wccaraudio.com/
SMD Amazon - www.amazon.com/Ceramic-SMD-ANL-Fuses-Pack/dp/B07NF89LK3/ref=sr_1_40?m=A3KER16TOZMXZB&marketplaceID=ATVPDKIKX0DER&qid=1549665792&redirect=true&sr=1-40
SMD eBay - www.ebay.com/sch/stevemeadedesigns/m.html?_nkw=&_armrs=1&_ipg=&_from=
Thanks for watching!
How can I become a dealer
I love the new Fuse Blocks colors now
A nice touch to top off the color would be to color match the top covers nuts.
Hey Steve, you should look into getting an Amazon affiliate link to your products on there, then yo can get a kickback from people looking at them from your videos.
Meade916 I like how you now have higher current ceramic fuses, will definitely be ordering those for my ampere audio 5000.1. I need some 250a fuses to go with the smd dual fuse holder. Looks great, and safe at the same time!
When I finish university, and earn many many thousands. Honestly I’m going to purchase quite a lot of your products and make an epic system. Atm my top builds are like your budget builds. Sure your stuff is a little expensive. But then how often do you see good shit like this on the market. Not a lot. Shows you’re putting more money in and I like the quality of this stuff.
Went by the shop today and got myself a Quad ANL Fuse Block and a few other goodies! No one does it better than Steve Meade SMD.
Loving my new DD-1 all the way down under in australia, now i see this and i want new fuse blocks too!
I like that style. I'm new to car audio and want all my blocks to come from this company
Dope!
thanks Doug!
Awesome selection bro... when you look at your products it just screams High Quality!!! Can’t wait to get mine !!!👍🏽
Can't wait to see some 2/0 and or 4/0 ran on these
Absolutely dope SMD. Got me rethinking my entire system all over again!
Wow badass fuse holders and fuses! I've seen cheap plastic fuses melt something awful, those ceramic look top notch. Very nice.
Dude straight killing the game!
Those are beautiful!
I thought the other sets I bought from you were fire! These whewwww! Totally impressed.
Top notch! Everything looks awesome!
Damn Meade, you have come a long way. So happy for you. Nice stuff! High quality, looks great, and practical too. Keep innovating!
The copper gives them an old school touch
They look great!
Damn those are gorgeous! Great job on those beautiful fuse holders!
That moment when you literally watch the channel, and OWN SMD products, but only just realize that SMD = Steve Meade Designs and that Steve Meade owns SMD and makes all the products 😂
top notch and changing the game as usual very happy for you bud
Very very nice SMD products!!! 👍👍👍 Great video Steve!!! Keep up all the good work your doing my friend!!!✌️✌️✌️
That is beast mode of a product right there brother! Good job!!
thanks Josh!!!
Great video and product, I have smd distribution blocks and I really like smd products I will be planning on adding this to my set-up.
That blue is so sick ! Dang I wish I could afford some of those, absolutely bad ass very nice keep up the great work.
very sweet fuse holder
Nice as hell.. Keep up the great work my brother 💪🏻💪🏻💪🏻💪🏻💪🏻
Great job
dropped a like man shared on twitter nice work they came out wicked
looking good
These are dope!
very nice quality
Good shit Steve!
TIGHT!! Workin on gettin my money right. Best believe when I do’s ima max out the smd love!!! Best and best lookin hardware in the bizz!!
Beautifull sistem Steve!! From México.
Legend you build clean ass shot nang
Looks like an amazing product
thanks a lot my bro. :)
I’m deff ordering a white one
So Dope!
Nice! 👊
That's CLEAN, real CLEAN. #SMD
That's some sexy new stuff man.... killer work as always...
Nice
Woow steve they are soo nice u should put them in your caddy when your star puttin your system
Exelent 👍 distributor
Car Audio ” Candy” ! Gots to get me sum.
very nice! my stem is weak AF! i only need a 60a fuse😅
Those are the nicest fuse blocks I've ever seen. Real talk. But I need one of the new xl2 with the mirror images in a octo or a deca. Asap pls. Lol
Looks really good steve. .. mite have to spend some of this govment check
Nice,men... Do you ever think to do your own limited edition "SMD" amplifiers.
Nice👍
That’s dope! Great job Steve 👍
Them fuse holders are absolutely beautiful and the ceramic fuses make it really standout! Beautiful products in the SMD line up.
I need one of these where I’m at they don’t have shit had to go 30 miles just to get 0 gauge wire. Doing the big 3 and would love to make it look sweet with one of your blocks . How do I get some ? Not great with the inter web lol
Man the white fuses on the red with the chrome look bitchin very nice
Oh wow those are some sick fuse holders (in a good way)....keep up with the good work...btw how much are those tho?
Looking good. Colored acrylic always looks like candy
Show room quality👍👍
so the power comes into the block at any random 1-4?
Dose it fit any fuse holder or I need the Smd fuse block too I got the skar anl fuse block but I need new fuse and trying get a Smd fuse anl
Have a question. I'm installing the fuse block in the rear of my sons jeep cause I'm running a second battery. Do I need to install a fuse block in the front or the fuse block takes care of tht
When u going have more of ur rca available?
You’re a genius at what you do!
not a genius by any standard...i just love making cool shit. But thanks a lot Draper i appreciate that comment. :)
Everything I do in life, I try for perfection. Work, family, hobbies you name it.... That there block is fucking dope perfection. (TG on your FB heh)
Saw these on your insta!🔥🔥 Super clean!
Steve your killin the game🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Are any of the ANL fuses copper by chance?
Need these!!! First baby
Make a led plate to mount underneath to light it up
What's the difference between the allen wrench and bolt figure for the wires? Is one better than the other or they the same?
Clean AF
96 FTW!!!
Steve on the metal part of the fuse block l think put smd at a angle and have it repete smdsmdsmd:-) did you see those caddys:-)
nah.
Can I some of the red trim panels?
I need one in Copper but that holds 3 fuses...help
Hey Steve off Topic did you ever put the SMD'S in the Civic All the videos say coming soon ?
nah
Anyone know the thickness of the copper or aluminum bars used in the SMD fuse holders?? In trying to figure out if the double fuse holder will be able to handle the currenr or if I need to step it up to the quad or even bigger depending on the sitsuation. The copper ones are so sweet but they really put a hurt on the wallet especially the bigger you go. Just like everything else in the car audio game.
the blocks shown here have 1/4" busbars, but any fuse holder in our lineup can handle whatever you are doing. You need to worry more about how many separate outputs you need more than the bar thickness though. OH, and trust me, copper ain't cheap. I cringe when i purchase it. Just an FYI, the aluminum is just as good. There will be no difference at all in any car audio situation between the copper and aluminum bus bars. I make copper simply because people want it not because i think it will be better. Copper IS a better conductor, even better than gold....but for what we do, there is no difference what so ever.
Its levels to this shit & u sir are most definitely top top tippy top level keep going good sir #motivation
Hi 😎
Damn bro imagine this you can sande the bottom plates and glue in some led strips and make them light up too
Straight up eye candy .. plz just donate a red one to me for my project lol
💪 💪 💪☝
OooWwweeeeeee 💪🔥🔥🔥🔥🔥🔥🔥🔥🔥😎
good fuse 500 amps
Who ia the OEM for the fuses? Blue Sea Systems?
where do I get the red ones I got black from Amazon
His website
Where the fuses cover up the smd in the middle it would look good with smd continuous around the edge like a border
I know what I’m getting once I go to run two amps
How much the damage
Incubus. Drive. Good song.
Damn. I just had bought the 2 post fuse block. I would have loved the red one to stick with the red theme in my car. They look awesome. And now I'll have to buy your fuses too.
was it standard or an XL version? email me at wccaraudio@gmail.com ill whip you up a red trim cover you can glue over the top :) Ill ship it to you on me.
@@meade916 Awesome. Just sent the email out with the info.
Very nice... but to expensive in my opinion
"expensive" is in the wallet of the beholder. Some people think a pack of tic-tacs is too expensive. Get in where you fit in.
Bro I need a clear acrylic back plate for my crecendo audio bc 6k amplifier it's the new model
Yo man
Thing is the size of a mono amp!
it ain't too bad. It is larger than the standard ones we make but i also put a lot more metal into it :D
Brasil...
Brasil what?
@@meade916 eu sou do Brasil e acompanho seu canal,mesmo não entendendo nada do que você fala 😂😂😂
@@givanildosilva8417 haha! ok! well thank you sir :)
@@meade916 ✌