Hi @vixola9268, This video shows a Speedmaster XL 106-7+L with Hycolor Multidirve and AutoPlate XL. A printing plate change, inking unit washing, blanket washing and impression cylinder washing can be carried out simultaneously in all units in a makeready time of 2,5 minutes. If automatic ink duct washing is added to this, the makeready time for all units is 3,5 minutes. One operator can refill two ink fountains with ink in this time. If 2 helpers are added to help fill in new ink, a total of 4 minutes is required. If all units are to be filled with new ink by one operator, the total set-up time is approx. 12 minutes. The machine sets up very quickly. If there is an ink change in all printing units at the same time, another assistant should provide short-term support during this time to keep the OEE high, as seen in the video. We hope this answers your question! Kind regards from the Social Media Team
im back at Utah Paper Box company we got one of this being installed we are very excited to produce the best printing in Utah i great place to work for
Yes indeed it is. You can also check other job sheets via the program and monitor other processes. But luckily the printer does most of the work, just have to make sure to add ink frequently or else there will be printing defects
@@jgslimftwguzman1926 Hello, I also work on an XL162 and the plates do not bend. What I can't do is do a correct nonStop, something always fails and if it doesn't fail when withdrawing, the bars that hold the paper drag it and fold it, so in the end you have to stop to remove the folded sheets.
Hi @penilatengineeringandproje138, please find some training programs on our website: www.heidelberg.com/global/en/services_and_consumables/training_consulting/training_consulting_overview.jsp Kind regards from the Social Media Team
Olá Amigos de Profissão Me desculpe o encômodo Estou fazendo o Canal sobre a Profissão Gráfica Está ficando bem legal De uma olhadinha Segue o link Agradeço a atenção ua-cam.com/channels/zvf3fKItjByEH1ZwBpU_XQ.html Se inscreva 👍🏾 Compartilhe
Dear faiz, Please be so kind and send us your e-mail address so that our local office can get in contact with you. Best regards from the Social Media Team
Very very nice job done by Heidelberg.
Work in a Printing Factory where one of these has been installed. Amazing kit!!!
What if you are changing all colors, how long does the changeover take including washing the ink fountains?
Hi @vixola9268,
This video shows a Speedmaster XL 106-7+L with Hycolor Multidirve and AutoPlate XL. A printing plate change, inking unit washing, blanket washing and impression cylinder washing can be carried out simultaneously in all units in a makeready time of 2,5 minutes. If automatic ink duct washing is added to this, the makeready time for all units is 3,5 minutes.
One operator can refill two ink fountains with ink in this time. If 2 helpers are added to help fill in new ink, a total of 4 minutes is required. If all units are to be filled with new ink by one operator, the total set-up time is approx. 12 minutes.
The machine sets up very quickly. If there is an ink change in all printing units at the same time, another assistant should provide short-term support during this time to keep the OEE high, as seen in the video.
We hope this answers your question!
Kind regards from the Social Media Team
im back at Utah Paper Box company we got one of this being installed we are very excited to produce the best printing in Utah i great place to work for
Very productive 😅 great in
Vestor
The defect inspection camera system, is it available to all the presses??
Yes indeed it is. You can also check other job sheets via the program and monitor other processes. But luckily the printer does most of the work, just have to make sure to add ink frequently or else there will be printing defects
PERMANENTLY POWERFUL!
WHY we still have to bend plates?? WHY??? it is really timeconsuming process!!!
I know right! Since the good old days that has never changed!! Good point!! Hmm??
Buddy you must work on old press I run on heildelberg xl 162 , no bending plates on punch holes
@@jgslimftwguzman1926 Hello, I also work on an XL162 and the plates do not bend. What I can't do is do a correct nonStop, something always fails and if it doesn't fail when withdrawing, the bars that hold the paper drag it and fold it, so in the end you have to stop to remove the folded sheets.
@@studebaker8288 ong it really do be tiresome and nerve wrecking when it spits it out like that.
Any training video can help to find printing job?
Dear Xiu, Unfortunately we do not know if any training video can help you finding a job. Best regards from the Social Media Team
Жесть ! Так технологии шагнули вперед ! А мы до сих пор печатаем на допотопном оборудовании ((((
У нас sm 102
Greeting sir
Please I want to study differents machine it my dream to improve in heldleberg machine 🙏 kindly assist me with training 🙏
Hi @penilatengineeringandproje138, please find some training programs on our website: www.heidelberg.com/global/en/services_and_consumables/training_consulting/training_consulting_overview.jsp Kind regards from the Social Media Team
11:08
Best mesin ever👍️👍️
Es asombrosa!
Olá Amigos de Profissão
Me desculpe o encômodo
Estou fazendo o Canal sobre a Profissão Gráfica
Está ficando bem legal
De uma olhadinha
Segue o link
Agradeço a atenção
ua-cam.com/channels/zvf3fKItjByEH1ZwBpU_XQ.html
Se inscreva 👍🏾
Compartilhe
مقاس 160*120
Супер машины .Особенно мне нравятся немецкие машины .
🙏🏼
Butt packages Pvt ltd from Gujranwala Pakistan
Price in india
Dear faiz, Please be so kind and send us your e-mail address so that our local office can get in contact with you. Best regards from the Social Media Team
👍🏾
Hola buenos días oy servicio de mecánico de maquinaria de imprenta y editoriales y otras
Hola y saludos desde alemania.
It’s like the latest Gillette razor 🤣 this one has 12 blades